Sennheiser HD 515 user manual

Summary of the content on the page No. 1

Changing the cable (HD 515, HD 555 and HD 595)
Removing the cable
Strongly pull the ear cushion up and
away from the earcup until it unlocks.
Use a flat screwdriver to carefully
lift off the system cover.
Remove the foam protection.
1

Summary of the content on the page No. 2

Remove the cable ends from the socket. Remove the cable clamp. Remove the cable by turning it to and fro. 2

Summary of the content on the page No. 3

Replacing the cable Before inserting the new cable, try out the cable clamp. Insert the cable ends into the small hollow space and guide the cable (without the cable clamp) through the opening by turning it to and fro. Insert the cable clamp into the notch on the cable. Insert the cable ends into the socket as shown. If necessary, use a suitable tool (e.g. a screwdriver). 3

Summary of the content on the page No. 4

Replace the foam protection. Put the system cover back by pressing it down until it click-locks into place. Press down the ear cushion onto the earcup until it click-locks into place. Sennheiser electronic GmbH & Co. KG 30900 Wedemark, Germany Phone +49 (5130) 600 0 Fax +49 (5130) 600 300 www.sennheiser.com Publ. 02/04 4