Summary of the content on the page No. 1
72536-05_CS70_US_12.06.qxd:05-PI-010 12/13/06 10:40 AM Page 2
WARRANTY
Limited Warranty
• This warranty covers defects in materials and workmanship of products manufactured,
sold or certified by Plantronics which were purchased and used in the United States.
• This warranty lasts for two yeasr from the date of purchase of the products.
• This warranty extends to you only if you are the end user with the original purchase
receipt.
• We will, at our option, repair or replace the products that d
Summary of the content on the page No. 2
72536-05_CS70_US_12.06.qxd:05-PI-010 12/13/06 10:43 AM Page 2 WELCOME PACKAGE CONTENTS This User Guide provides instructions on the setup and usage of the Plantronics Headset CS70N wireless office headset system. Please refer to the separate Safety Instructions booklet for important product safety information prior to installation or use of the product. For additional help, service or support information, refer to the product warranty card or visit www.plantronics.com. TABLE OF CONTENTS Gel
Summary of the content on the page No. 3
72536-05_CS70_US_12.06.qxd:05-PI-010 12/13/06 10:43 AM Page 4 FEATURES FEATURES Base - Top View Base - Bottom View Telephone Handset Front: Jack Indicator Lights Talking (Green) Handset Lifter Jack Power (Red) Charging (Amber) AC Charging Jack Telephone Cord Jack Speaking Volume Charging Cradle Major Adjust Headset Telephone Configuration Dial Listening Volume/Mute Call Control Button Rear: Talk Indicator Light Speaking Volume Minor Adjust ™ Noise-Canceling Boom IntelliStand On/Off Switch
Summary of the content on the page No. 4
72536-05_CS70_US_12.06.qxd:05-PI-010 12/13/06 10:43 AM Page 6 SETUP SETUP Base - Bottom View 1 2 3A 4A Unplug the handset cord from phone. Plug the phone cord that is connected to the CS70N base into the handset jack on the phone. CAUTION: Your phone may have two similar jacks. Put the cord only in the jack from which the handset came. 4 3 Plug the handset cord into the Plug the AC charger into the handset jack in the base. base’s AC charging jack. Push in until it clicks. Push in firmly. Co
Summary of the content on the page No. 5
12” 6” 72536-05_CS70_US_12.06.qxd:05-PI-010 12/13/06 10:44 AM Page 8 SETUP—HANDSET LIFTER (Optional) CHARGING 1. Slide headset into charging cradle so that microphone boom is on the 1 2 right. 2. Gently press down on the headset to ensure that headset is in correct position. Amber charge indicator light on base will flash while charging and will change to solid amber when fully charged. • 20 minutes = minimum charge to continue setup • 3 hours = full charge 1. Plug handset lifter power cor
Summary of the content on the page No. 6
OR OR OR 72536-05_CS70_US_12.06.qxd:05-PI-010 12/13/06 10:44 AM Page 10 ADJUSTING FIT MULTI-SHIFT PAIRING 1 2 Enable 1 2 3 Disable 1. To pair another headset to the same base, you must first enable the multi-shift pairing feature. Long press (5 sec.) the speaking volume minor adjust up button on back of base until the power indicator light flashes. 2. Place a charged headset in charging cradle and red indicator light on base will flash for 2 seconds if the multi-shift pairing feature is ena
Summary of the content on the page No. 7
1 1 2 1 1 2 1 2 2 72536-05_CS70_US_12.06.qxd:05-PI-010 12/13/06 10:44 AM Page 12 MAKING/ANSWERING/ENDING CALLS MAKING/ANSWERING/ENDING CALLS With Handset lifter (Optional) Without Handset lifter To first test proper set up of the handset lifter: 1. Press the call control button on headset to activate handset lifter and lift handset from phone. Dial tone should sound if the handset is raised high enough. To make a call: 2. If no dial tone, adjust handset lifter height switch or reposition
Summary of the content on the page No. 8
4 4 1 72536-05_CS70_US_12.06.qxd:05-PI-010 12/13/06 10:44 AM Page 14 CHECKING COMPATIBILITY LISTENING VOLUME NOTE: Be sure to set your telephone’s volume at the mid range before adjusting the NOTE: The compatibility setting of “1” is set at the factory to work with most phones. CS70N volume. However, if you do not hear a dial tone, if either you or the recipient is having trouble hearing, or if you experience buzzing/hissing, please follow the directions below.
Summary of the content on the page No. 9
72536-05_CS70_US_12.06.qxd:05-PI-010 12/13/06 10:44 AM Page 16 HEADSET CONTROLS SPEAKING VOLUME Minor Adjust Major Adjust Use the speaking volume major adjust Use the speaking volume minor adjust control on the bottom of the base for control on the back of the base for Feature Action Tone large incremental adjustments. minor incremental adjustments. NOTE: You must be in talk mode (i.e. on a NOTE: A A is the lowest setting. Listening volume Press + to increase Ascending/descending B is the
Summary of the content on the page No. 10
72536-05_CS70_US_12.06.qxd:05-PI-010 12/13/06 10:44 AM Page 18 BASE INDICATOR LIGHTS TROUBLESHOOTING Problem Solution Problem Solution Indicator Lights Sound in handset is I plugged everything in but • Check that the AC charger jack is connected to the base unit. • Reduce speaking volume by changing the speaking volume Talking/Muted (Green) distorted/hear echo in the lights won’t come on. major adjust switch setting. See page 16. • Check that the AC charger is securely connected to a wor
Summary of the content on the page No. 11
4 4 3 72536-05_CS70_US_12.06.qxd:05-PI-010 12/13/06 10:44 AM Page 20 TROUBLESHOOTING SUBSCRIPTION Problem Solution Problem Solution The headset and base unit are supplied subscribed to each other. However, if you wish to use a replacement headset with the base unit, then the units must be re-subscribed. To I plugged everything in but Sound in handset is • Reduce speaking volume by changing the speaking volume • Check that the AC charger jack is connected to the base unit. do so, please fol
Summary of the content on the page No. 12
1 2 1 2 1 2 72536-05_CS70_US_12.06.qxd:05-PI-010 12/13/06 10:44 AM Page 22 Extender Arm Stabilizers Extender Arm ADDITIONAL PARTS (If required) REGULATORY NOTICES Stabilizers Extender Arm FCC Requirements Stabilizers This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This
