Summary of the content on the page No. 1
Bluetooth headset
BTHS-002 BLUETOOTH HEADSET
Summary of the content on the page No. 2
Bluetooth headset Disclaimer • We spared no efforts to make sure that the information in this manual is correct and complete. However no liability is accepted for any errors or omissions. Gembird Electronics reserves the right to change the specifications of the hardware and software described in this manual without prior notice. • No part of this manual may be reproduced, transmitted or translated in any language in any form, by any means, without the prior written permission of Gembird
Summary of the content on the page No. 3
Bluetooth headset BLUETOOTH HEADSET USER MANUAL Introduction Thank you for choosing our BTHS-002 Bluetooth Headset. This manual will help you install and use it properly. The product has been quality tested to ensure its reliability and TM suitability for your needs. The Headset uses 2.4GHz Bluetooth Technology to provide wireless communication with all Bluetooth audio enabled mobile phones and other devices that support a Bluetooth headset and/or hands free profiles. It
Summary of the content on the page No. 4
Bluetooth headset Package contents o Bluetooth Headset o AC Mains Charger o Ear Hook o User Manual
Summary of the content on the page No. 5
Bluetooth headset Buttons and controls Operating instructions 1. Charging the Bluetooth Headset Connect the AC charger to the wall socket (the charger supports 100-240 V and is suitable for usage in Europe, Asia, USA and other countries), then connect the yellow tipped DC plug into the Bluetooth headset's DC jack (mini charging jack) to commence charging. During the charging the red indicator on the headset will first light up, then gradually fade and finally switch off on
Summary of the content on the page No. 6
Bluetooth headset 2. Pairing Pairing is the creation and exchange of a link key between two Bluetooth devices. Both devices use the link key for future authentication when exchanging information, in order to successfully pair the Bluetooth headset with the Bluetooth mobile phone and other Bluetooth devices such as PCs and notebook computers (for Bluetooth version 1.1). The Bluetooth headset supports SCO (Synchronous Connection Oriented link) and ACL (Asynchronous Connection Less) and
Summary of the content on the page No. 7
Bluetooth headset Switching the Bluetooth Approximately 5 seconds Will emit a red indicator light Once the headset is switched off, the headset off which will stop once the mobile phone will use its own speaker for headset is off the sounds Volume mute Click and hold down the The Bluetooth headset will volume adjustment button mute the call (‘+’&’-‘) for 3-4 seconds Redial Click and hold down the Redials the last call made from The mobile phone has to support the volume adjustment but
Summary of the content on the page No. 8
Bluetooth headset the Bluetooth mobile phone on and follow the user manual supplied with the Mobile phone to commence pairing. The mobile phone will display ‘BT headset' once the Bluetooth headset has been detected. You will then be prompted to enter the passkey (1234) to complete the pairing. a) Volume control To adjust the volume of the Bluetooth headset, please use the volume control buttons with the '+' and '-' symbols on the headset. To increase the volume of the headset please, pr
Summary of the content on the page No. 9
Bluetooth headset Ergonomically designed, the ear hook can be placed on both sides of the headset so that the product can be used on both the left and the right ear. Technical specifications Bluetooth Version Compliant with Bluetooth version V1.1 Effective range 10 meters Frequency 2.4GHZ-2.4835GHZ ISM Band Connection Point to point Talk time 3.0 hours Standby time 100 hours TX 0dBm (Class II) Encryption 128 bit encryption Power consumption Talking mode 20mA, standby mode 500uA
Summary of the content on the page No. 10
Bluetooth headset Battery Rechargeable Lithium 120mAh Charging 5V DC input/100-240V AC adapter Charging 2 to 3 hours Operating temperature -10 to 55 degrees Storage temperature -20 to 60 degrees Certifications CE,FCC and BQB Passkey 1234 Dimensions 70*22*26 mm Weight 15g Accessory AC charger Pairing One to one, can be paired to multiple Bluetooth device but can only be used with one device at a time Note o The Bluetooth headset is not suitable for use in or storage in areas with extreme
Summary of the content on the page No. 11
Bluetooth headset Troubleshooting Problem description Troubleshooting Unable to switch the headset on -Click and hold the ‘Mode’ button for aproximately 5 seconds -Recharge the headset No audio after pairing -Ensure that you are within the distance of 10 meters from the phone -Remove pairing and start pairing again Red indicator light is on -Recharge the mobile phone Charging indicator does not light up -Check the physical connection of the charger and the DC jack -The Bluetooth head
Summary of the content on the page No. 12
Bluetooth headset Noise is heard -Change the distance between the mobile phone and the headset -Move to a different location Voice low volume by talking -Point the microphone towards you Regulatory Information European Community Notice We hereby declare that this Biuetooth Headset is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Products bearing the CE marking comply with the R& TTE Directive (1999/5/EC), EMC Directive (89/336/ EE
