PPG Pittsburgh Paints Pittsburgh Diesel Engine Compression Tester 93644 user manual

Summary of the content on the page No. 1

Diesel Engine Compression Tester
Item 93644
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
When unpacking, make sure that the product is intact and undamaged.
If any parts are missing or broken, please call 1-800-444-3353 as soon as possible.
Visit our website at: http://www.harborfreight.com
© ®
Copyright 2011 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork contained herein may be repro

Summary of the content on the page No. 2

Save This Manual Specifications Keep this manual for the safety warnings and precautions, assembly, operating, inspection, Pressure maintenance and cleaning procedures. Write the 0-1000 PSI / 0-7000 kPa Scale product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase Gauge ± 2% if product has no number). Keep this manual and the Accuracy receipt in a safe and dry place for future reference. Air Release Push Button Type Hose Size 15/64 IN.

Summary of the content on the page No. 3

8. Have your tester serviced by a qualified IMPORTANT SAFETY repair person using only identical replacement parts. This will ensure that INFORMATION the safety of the tester is maintained. 9. Maintain labels and nameplates on the tester. WARNING Read all safety warnings These carry important safety information. and instructions. Failure to follow the warnings If unreadable or missing, contact Harbor and instructions may result in fire and/or Freight Tools for a replacement. serious

Summary of the content on the page No. 4

2. Refer to the Diesel Adapters chart to select Operating Instructions the proper Adapter to be used for the specific vehicle you will test. After identifying the correct adapter, assemble it securely as shown on the Read the ENTIRE IMPORTANT Parts List and Assembly Diagram on page 7. SAFETY INFORMATION section at the beginning of this manual including 3. Prepare the engine for compression all text under subheadings therein testing by starting the engine and allowing before set up o

Summary of the content on the page No. 5

Diesel Adapters Manufacturer Engine Type Thread Adapter # ® ® Audi Early models, see VW for TDI Injector 24 x 2.00 C ® Mercedes-Benz Early models Injector 24 x 2.00 C ® ® VW 1970’s Rabbit Injector 24 x 2.00 C ® Volvo Early models except 30’s & 40’s Injector 24 x 2.00 C ® U BMW 2.4L Glow Plug 12 x 1.25 H ® ® ® Chevette /Isuzu ; Luv / 1.8L, 2.2L Glow Plug 10 x 1.25 E ® Isuzu ® U Deutz Many models Glow Plug 12 x 1.25 H ® ® Ford /Mazda (1984-87) 2.0L Glow Plug 10 x 1.25 F ® ® (1983-84) 2.2L Escort ,

Summary of the content on the page No. 6

Maintenance Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise, vibration, or leaking air occurs, have the problem corrected before further use. 1. Before each use, inspect the general condition of the Tester. Check for cracked, worn or damaged Adapters, damaged Pressure Gauge and Hose, and any other condition that may affect the tester’s s

Summary of the content on the page No. 7

Parts List and Assembly Diagram Part Description Qty Part Description Qty 1 Pressure Gauge 1 10 ZG 1/8" (M) Male Quick Coupler 1 2 Air Release Button 1 11 ZG 1/8" (F)-M24 x 2 (M) Adapter 1 3 Rubber Hose 1 12 Adapter Sleeve 1 4 1/8" NPT Quick Coupler 1 13 Quick Connect with Ball Tip 1 5 7/16"-20 (F) Quick Coupler 3 14 1/2"-19 Lock Nut 1 6 M12 x 1.25 (M)-7/16"-20 (M) Adapter 3 15 7/16"-20 (M)-7/16" x 20 (F) 90° Connector 1 7 M12 x 1.25 (F)-M18 x 1.5 (M) Adapter 2 16 ZG 1/8" (M)-M24 x 1.5 (M) Adapt

Summary of the content on the page No. 8

PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS,