Summary of the content on the page No. 1
Rikaline
GPS-300
GPS Receiver
User’s Guide
Dec. 26, 2003
Rikaline International Corp.
10F, 64, Kang-Ding Road, Taipei 108, Taiwan, R.O.C.
Phone: +886-2-2370-4688 Fax: +886-2-2370-4686
E-Mail: info@rikaline.com.tw Web: www.rikaline.com.tw
All Right Reserved
Summary of the content on the page No. 2
GPS-300 Operating Manual Rikaline TABLE OF CONTENTS ……….………………………………………………………………………………….. 0. Quick USE 3 ..………………………………………………………………….. 0.1 Check GPS Package 3 …..…………………………………………………………………….. 0.2 Check Connector 3 ………………………………………………. 0.3 Connect GPS-300 to your machine 3 …………………………………………………………………….. 0.4 Turn on your machine 3 ……………………………………………………………………………………….. 1. Introduction 4 ………………………………………………………
Summary of the content on the page No. 3
GPS-300 Operating Manual Rikaline 0. Quick Use 0.1 Check GPS Package 0.1.1 Standard Package Main Unit: GPS Receiver and Power Converter built in the housing. Mounting Accessories: Metal Bracket + 2 Screws (for plastic) Comes Fixed with Glue Cable Ties x 4 pieces Velcro (Adhesive Tapes) x 1 Set (When using on the dashboard) Power Cable: 1.5m with connector & Fuse + Rocker Switch +2m Baring End + A pai
Summary of the content on the page No. 4
GPS-300 Operating Manual Rikaline 1. Introduction 1.1 Overview The Rikaline GPS-300 Black Box is a total solution GPS receiver, designed based on SiRF Star II Architecture. It is pre-installed and fixed in your car or boat without extra wiring. This positioning application meets strict needs such as car navigation, mapping, surveying, security, agriculture and so on. It communicates with other electronic utilities via
Summary of the content on the page No. 5
GPS-300 Operating Manual Rikaline A) Non DGPS (Differential GPS) Position 5-25 meter CEP with SA off Velocity 0.1 meters/second, with SA off Time 1 microsecond synchronized GPS time B) DGPS (Differential GPS) Position 1 to 5 meter, typical Velocity 0.05 meters/second, typical 5) Dynamic Conditions: Altitude 18,000 meters (60,000 feet) max Velocity 515 meters / second (1000 knots) max Acceleratio
Summary of the content on the page No. 6
GPS-300 Operating Manual Rikaline 2. Operational characteristics 2.1 Initialization As soon as the initial self-test is complete, the GPS-300 begins the process of satellite acquisition and tracking automatically. Under normal circumstances, it takes approximately 45 seconds to achieve a position fix, 38 seconds if ephemeris data is known. After a position fix has been calculated, information about valid position, vel
Summary of the content on the page No. 7
GPS-300 Operating Manual Rikaline 3. Hardware interface 3.1 Dimension Size: 120.0(W) x 80.0 (D) x 26.0(H) (mm) 4.72"(W) x 3.15" (D) x 1.02"(H). 3.2 Hardware Interface The GPS-300 includes a GPS receiver and constant voltage regulator in a metal box. After installation, connect the power cable, active antenna and data cable, you will have a deluxe great GPS unit in your mobile living facility. Any device you
Summary of the content on the page No. 8
GPS-300 Operating Manual Rikaline 3.3.1 RS-232 Data Cable 1. Cable Length: 1.5 meter 2. Connector: DB9 female at 2 ends 3. Positioning status LED: at device end 4. Part No.: A-6018-C 3.3.1.1 DB9 Female Connector Function Definition: GPS end (close to GPS-300 main unit) Pin Signal Name 1 N/A 2 RS-232 TX 3 RS-232 RX 4 LED- 5 -GND 6 N/A 7 N/A 8 LED+ 9 N/A 3.3.1.2 DB9 Female Conn
Summary of the content on the page No. 9
GPS-300 Operating Manual Rikaline 3.3.3 Active Antenna 1. Connector: SMA female 2. Cable length: 5 meters RG-174 3. Antenna Gain: 26-28dB 3.3.4 Close-end Connector 1. Size: CE-1: 20mm (22-16AWG), CE-2: 20mm(16-14AWG), CE-5: 25.3mm(12-10AWG) 2. 3 pieces each, total 9 pieces 3.3.5 Velcro Size: 100 x 60mm 3.3.6 Cable Ties Size: 170(L) x 5(W) x 1(T) mm 3.3.7 Bracket w/ 2 screws The GPS-300 is equipped wit
Summary of the content on the page No. 10
GPS-300 Operating Manual Rikaline 4. USB Driver 4.1 System Requirements IBM, Pentium or above and other compatible PC; 16 MB and above memory; Windows 98/Me/2000; VGA Graphic Adapter. 4.2 Installation 1. Copy entire folder from CD to hard disk. 2. Connect GPS-300 USB connector to computer. While the computer automatically starts the installation program, please direct the driver to the
Summary of the content on the page No. 11
GPS-300 Operating Manual Rikaline Appendix A Software Interface The GPS-300 interface protocol is based on the National Marine Electronics Association's NMEA 0183 ASC Ⅱ interface specification, which is defined in NMEA 0183, Version 2.2 and the Radio Technical Commission for Maritime Services (RTCM Recommended Standards For Differential Navstar GPS Service, Version 2.1, RTCM Special Committee No.104). A.1 NMEA Tr
Summary of the content on the page No. 12
GPS-300 Operating Manual Rikaline A.1.2 Geographic Position with Latitude/Longitude (GLL) Table A-4 contains the values for the following example: $GPGLL,3723.2475,N,12158.3416,W,161229.487,A*2C Table A-4 GLL Data Format Name Example Units Description Message ID $GPGLL GLL protocol header Latitude 3723.2475 ddmm.mmmm N/S Indicator N N=north or S=south Longitude 12158.3416 dddmm.mmmm E/W Indicator W
Summary of the content on the page No. 13
GPS-300 Operating Manual Rikaline Table A-8 GSV Data Format Name Example Units Description Message ID $GPGSV GSV protocol header Number of Messages 2 Range 1 to 3 Message Number 1 Range 1 to 3 Satellites in View 07 Range 1 to 12 Satellite ID 07 Channel 1 (Range 1 to 32) Elevation 79 degrees Channel 1 (Maximum 90) Azimuth 048 degrees Channel 1 (True, Range 0 to 359) SNR (C/No) 42 dBHz Range 0 to 99, null w
Summary of the content on the page No. 14
GPS-300 Operating Manual Rikaline Reference M Magnetic (1) Speed 0.13 Knots Measured horizontal speed Units N Knots Speed 0.2 Km/hr Measured horizontal speed Units K Kilometers per hour Checksum *6E End of message termination (1) SiRF Technology Inc. does not support magnetic declination. All “course over ground” data are geodetic WGS84 directions. A.2 RTCM Received Data The defa
Summary of the content on the page No. 15
GPS-300 Operating Manual Rikaline Appendix B Earth Datums & Output Setting B.1 Earth Datums The GPS-300 is built in earth datum with WGS84. B.2 Setting B.2.1 Manufacturing Default Datum: WGS84. Baud Rate: 4800. Output: GGA, GSA, GSV, RMC, VTG. B.2.2 Baud Rate and Output Sentences Setting B.2.2.1 By SiRFdemo Program 1// Connect your GPS-300 to PC (either COM or USB) 2// Execute SiRFdemo
Summary of the content on the page No. 16
GPS-300 Operating Manual Rikaline Appendix C Ordering Information C.1 Standard Package Main Unit: GPS Receiver and Power Converter built in the housing. Mounting Accessories: Metal Bracket + 2 Screws (for plastic) Comes Fixed with Glue Cable Ties x 4 pieces Velcro x 1 Set Power Cable: 1.5m with connector & Fuse + Rocker Switch +2m Baring End + 2 Close-end Wire Connector x 3 Sets in Different
Summary of the content on the page No. 17
GPS-300 Operating Manual Rikaline C.2.3 PC Holder 1 A-2001 PDA Holder, Suction Cup, 150mm, Short Arm 2 A-2001-L PDA Holder, Suction Cup, 150-320mm Adjustable 3 A-2002-A PDA Holder, Suction Cup, 150mm, Short Arm, Magnetic Pad 4 A-2002-AL PDA Holder, Suction Cup, 320mm, Long Arm, Magnetic Pad 5 A-2005-A PDA Holder, Suction Cup, 150mm, Short Arm, 4-Claw 6 A-2005-AL PDA Holder, Suction Cup, 320mm Long Arm, 4-Cla
