Summary of the content on the page No. 1
F10
User Manual
en
English - Europe/Australia/New Zealand
Summary of the content on the page No. 2
F10 Important Safety Information PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or m
Summary of the content on the page No. 3
F10 Internal battery-specific safety information The Navman contains a non-replaceable internal lithium-ion polymer battery. The battery may burst or explode if mishandled, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush or puncture the battery. Recycle or dispose of the battery safely and properly according to local laws and regulations. Do not dispose of the battery in fire or water. Only use the correct mains power charger (sold separ
Summary of the content on the page No. 4
F10 Contents Important Safety Information..................................................................................................................2 Welcome................................................................................................................................................6 Important information for using the manual.......................................................................................6 Getting to know your Navman.........................
Summary of the content on the page No. 5
F10 Select Map 3/3............................................................................................................................49 Map POIs........................................................................................................................................50 Volume ...........................................................................................................................................51 Screen ..............................................
Summary of the content on the page No. 6
F10 Welcome Thank you for purchasing this Navman. This manual has been prepared to guide you through the operation of your Navman from first set-up through to continuous use. Please read this manual carefully before using your Navman for the first time. Keep this manual in a safe place and use as your first point of reference. Important information for using the manual It is important to understand the terms and typographical conventions used in this manual. Formatting The following
Summary of the content on the page No. 7
F10 Getting to know your Navman We recommend that you familiarize yourself with the Navman's basic operations. Components Component Description Battery Indicator Indicates the level of battery charge: Green - battery full Orange - battery charging. Turns the Navman on or off. For more information, see” How do I turn my Navman off?” on page 10. Connection socket for GPS MMCX External Antenna (not included). To access the socket, gently lift the rubber cover.
Summary of the content on the page No. 8
F10 How do I get started? Note: Before you begin, check if your vehicle is fitted with a heat-reflective or heated windscreen. If so, you may need to purchase an external antenna for your Navman to receive GPS signals. The first time you use your Navman, it may take up to 15 minutes to establish a GPS connection. For more information about GPS, see “How do I navigate with GPS?” on page 16. How do I turn my Navman on for the first time? To get started for the first time, complete the
Summary of the content on the page No. 9
F10 3. Turn your Navman on Press and hold to turn your Navman on. Your Navman will turn on and display the Language screen. 4. Select your preferred language From the Select Language screen, tap your preferred language. To prevent the Select Language screen from displaying on each start-up, clear the Show on start-up check box. You can change your preferred language while using your Navman (see "Language" on page 56). 5. Read the warning message a) The Safety Agreement scre
Summary of the content on the page No. 10
F10 How do I adjust the volume? The volume on your Navman can be adjusted by the volume control on the Volume preference screen. To mute the volume from the map screens, tap and then tap . To adjust the volume, tap and hold to display the Volume preference screen. For more information on how to adjust the volume on your Navman, see “Volume” on page 51. How do I monitor the battery status? Your Navman has an internal battery that when fully charged, should provide power for up to 3
Summary of the content on the page No. 11
F10 How do I turn my Navman off? To turn your Navman off, press and hold . Power-saving standby mode To enter standby mode, press . To end standby mode, press again. When your Navman enters standby mode, the screen will turn off. When you turn your Navman on again, it will display the screen you were last viewing. To save power, your Navman will automatically enter standby mode after a pre-determined period of time. You can change the default standby mode setting at the Power prefe
Summary of the content on the page No. 12
F10 What are the main screens I will use? Main Menu screen The Main Menu screen is your starting point for searching for a destination. The Main Menu can be accessed from the map screens by tapping or by tapping the status bar at the bottom of any screen. Map screens There are four map screens used to view the route to your destination: 3D Map 2D Map Route Overview Turn-by-Turn The Map screens can be accessed from the Main Menu screen
Summary of the content on the page No. 13
F10 How do I navigate with GPS? The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft). GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi). Each satellite transmits a range of signals which are utilized by GPS receivers, such as your Navman, to determine an exact location. Although a GPS receiver can detect signals from up to 12 satellites at any time, only four signals a
Summary of the content on the page No. 14
F10 How do I go from A to B? Your Navman is equipped with maps that provide street-level detail for door-to-door navigation, including Points of Interest such as accommodation, parking areas, petrol stations, railway stations and airports. When you ... Then ... know the address of your destination use the address-entry wizard to enter the address see "How do I search for an address?" on page 15. want to make multiple stops use the Multi-stop Trip Planner screen to enter multiple waypo
Summary of the content on the page No. 15
F10 How do I search for an address? Enter a destination using the Destination Search, Keyboard and Preview screens, which used together form an address-entry wizard. This section provides a case study to help guide you through setting your destination. Note: In some countries, you can search for your destination by postcode or zip code. If you are in the United Kingdom, and you know the postcode of your destination, you can search for it from the Destination Search screen by tapping Pos
Summary of the content on the page No. 16
F10 2. Select the country Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3. a) From the Destination Search screen, tap . The Select a country screen will display. b) Select United Kingdom from the list. The Destination Search screen will display. 3. Search for the City/Area a) From the Destination Search screen, tap City/Area. The Keyboard screen will display. b) Us
Summary of the content on the page No. 17
F10 Using the Keyboard screen The Keyboard screen will display when you are required to enter text, such as when searching for a street name. Search results will be listed in matching order, with the closest matches appearing at the top of the list. A maximum of 99 results will display. The Keyboard screen can display with various layouts depending on the information you need to enter, including alphabet, number, alternate characters and combinations of these. You can also choose the ty
Summary of the content on the page No. 18
F10 b) Use the Keyboard screen to enter Navman Street as the street name of your destination, then tap the search result. Note: There may be multiple matches for a particular street name. Long streets that run through several neighbouring areas, and common street names will produce search results ordered by their city or area name. c) Use the Keyboard screen to enter 12 as the house number of your destination. The Preview screen will display. Note: If house numbers are available, b
Summary of the content on the page No. 19
F10 How do I create a trip with multiple stops? You can use the Multi-stop Trip Planner screen to set multiple stops or waypoints for your trip. Your route will be calculated to go via each of these points in the specified order. Waypoints can be added via the Multi-stop Trip Planner screen or by selecting Location, then Add to Trip from the pop-up Map menu on the 2D Map or 3D Map screen. You can save up to 198 multi-stop trips, each with up to 14 waypoints. Note: Waypoints added, updat
Summary of the content on the page No. 20
F10 a) Tap Add. The Add to Trip Menu will display. b) Tap Address. The Destination Search screen will open. Note: You can also add waypoints using favourites, recent destinations and POI locations. 2. Select the country Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3. a) From the Destination Search screen, tap . The Select a country screen will display. b) Select
