Summary of the content on the page No. 1
User’s Manual
Summary of the content on the page No. 2
This manual contains mostly hardware information. To know how to use the software of your device, please refer to the other manual. R02 (EU) Trademarks The Bluetooth word mark and logo are owned by the Bluetooth SIG, Inc. All other brand and product names are trademarks or registered trademarks of their respective companies. Disclaimer Specifications and manuals are subject to change without notice. Mio Technology assumes no liability for damage i
Summary of the content on the page No. 3
Table of Contents Precautions and Notices .......................................................................iii 1 Getting Started..................................................................................1 1.1 Understanding Hardware Components................................................ 1 Front Components ............................................................................... 1 Back Components...........................................................................
Summary of the content on the page No. 4
2.8 Outlook Sync...................................................................................... 21 2.9 Speed Camera ................................................................................... 21 2.10 Image Search..................................................................................... 21 3 Troubleshooting and Maintenance ...............................................25 3.1 Restart and Shut Down......................................................................
Summary of the content on the page No. 5
Precautions and Notices For your own safety, do not operate the controls of the product while driving. Use this product prudently. The product is intended for use solely as a navigation aid. It is not for precise measurement of direction, distance, location or topography. The calculated route is for reference only. It is the user’s responsibility to follow the traffic signs and local regulations along the roads. When you get out of the car, do not leave your device on the dashboard s
Summary of the content on the page No. 6
A car holder is needed when using the device in a car. Be sure that you place the device in an appropriate place, so as not to obstruct the driver’s view, or deployment of airbags. Do not mount where the driver’s Do not place unsecured field of vision is blocked. on the dashboard. Do not mount in front of Do not mount in front of an airbag panels. airbag field of deployment. iv
Summary of the content on the page No. 7
1 Getting Started 1.1 Understanding Hardware Components NOTE: Depending upon the specific model purchased, the color of your device may not exactly match the device shown in this manual. Front Components Ref Component Description Touch Screen Displays the output of your device. Tap the screen with your fingertip to select menu commands or enter information. Charge Glows bright amber to indicate that the battery is charging, Indicator and turns green when the battery is fully cha
Summary of the content on the page No. 8
Back Components Ref Component Description External GPS This connector (under rubber dust cover) allows use of an Antenna optional external GPS antenna with magnetic mount, which may be positioned on top of the car for better signal reception in areas Connector with poor reception. Speaker Sends out music, sounds and voice. Left-Side Components 2
Summary of the content on the page No. 9
Ref Component Description SD/SDHC/MMC Accepts a SD (Secure Digital), SDHC (Secure Digital High Slot Capacity), or MMC (MultiMediaCard) card for accessing data such as MP3 music. Headphone Connects to stereo headphones. Connector Top Components Ref Component Description Power Button Turns on and off the device. (Pressing briefly or for a long duration makes a difference. See sections 1.5 and 3.1 for information.) Bottom Components Ref Component Description Mini-USB Conn
Summary of the content on the page No. 10
1.2 Performing the Initial Start Up 1. For the initial start up, press the power button for 5 seconds to turn on your device. NOTE: For normal operation, briefly press the power button to turn on and off your device. 2. Your device turns on. Immediately charge your device as described in the next section. 3. When the language selection screen appears, select the desired language. 4. The Main menu appears. You can now use your device. 4
Summary of the content on the page No. 11
1.3 Charging the Battery via the USB Cable 1. Turn on the computer. 2. Connect the mini-USB end of the USB cable to the bottom of your device and the other end to a USB port on your computer. 3. If your device is on, the screen as shown below appears. Whenever your device is connected to a computer, you will not be able to use it. 4. The charge indicator glows amber when charging is in progress. Do not disconnect your device from AC power until the battery is fully charged, the charg
Summary of the content on the page No. 12
NOTE: When the device is connected to a computer, it is recognized as an external mass storage device. Do not delete any files pre-installed in the device. Deleting files of which the function is unknown can cause programs or features to malfunction. If you intend to charge your device in this way, turn off your device so that it takes less time to charge the battery. CAUTION: For optimal performance of the lithium battery: Do not charge the battery where the temperature is high (e.g
Summary of the content on the page No. 13
Connecting the Car Charger The car charger supplies power to your device when you are using the device in a car. CAUTION: To protect your device against sudden surges in current, connect the car charger only after the car engine has been started. 1. Connect one end of the car charger to the power connector of the cradle. 2. Connect the other end to the cigarette lighter in the car to power and charge your device. The indicator on the car charger lights in green to indicate that power i
Summary of the content on the page No. 14
1.5 Operating Basics Turning On and Off For normal operation, turn off the device by briefly pressing the power button. The device enters a suspended state. When you next briefly press the power button, the system resumes. You will be back to where you left off. NOTE: Pressing the power button for a longer duration has a different effect. See section 3.1 for more information. Navigating on the Screen To operate your device, touch the screen with your fingertip. You can perform the
Summary of the content on the page No. 15
Drag Hold your fingertip on the screen and drag up/down/left/right or across the screen. Tap and hold Tap and hold your fingertip until an action is complete, or a result or menu is shown. Main Menu The first time you initialize your device, the Main menu appears with the Find tab selected. From the Main menu, you can select another tab by tapping a button on the right side of the screen. A total of five tabs are available. No. Button Name Description Map Switches to the
Summary of the content on the page No. 16
1.6 Inserting a SD/SDHC/MMC Card Your device has a slot where you can insert an optional SD/SDHC/MMC storage card. To use a card, insert it into the slot, with the connector pointing to the slot and its label facing the front of the device. To remove a card, first make sure that no application is accessing the card, then slightly push the top edge of the card to release it and pull it out of the slot. NOTE: Make sure that no foreign objects enter the slot. 10
Summary of the content on the page No. 17
2 MioStudio 2.1 About MioStudio MioStudio is a collection of management tools. With the various tools, you can: Access the official website of Mio Technology Access the Mio Club registration website and log in as a member Restore the navigation software and map data to the factory default state Check the Mio server for any updates and execute the updates Transfer multimedia files between your device and computer Synchronize Outlook data (such as Contacts and Calendar) between your
Summary of the content on the page No. 18
4. Follow the onscreen instructions to complete the installation. Some independent program(s) will be installed together with MioStudio. Staring and Exiting MioStudio NOTE: Some MioStudio tools require your computer to be connected to Internet. Most MioStudio tools require your device to be connected to the computer via the USB cable. Disconnect the USB cable only after exiting MioStudio. Before disconnecting the cable, you must click the device icon in the task bar and click “Safely
Summary of the content on the page No. 19
MioStudio Screen Elements The MioStudio screen consists of three major parts: On the top of the screen is the menu bar ( ). On the left side of the screens are the tool buttons ( ). Each tool represents an independent module. On the right is the display area ( ) for the specific tool selected. See later sections for descriptions of all the tools. 13
Summary of the content on the page No. 20
MioStudio Settings To change how MioStudio works, click Tools Options if the MioStudio window is open or right click the icon in the system tray and click Options. Two tabs are available. General This page allows you to enable or disable the automatic check for update (enabling means the check will be performed periodically when MioStudio has been started), enable or disable the automatic startup of the program, and switch to a different language for the program. Advance This pa
