Summary of the content on the page No. 1
Operati On and p ar ts Manual
PRELIMINARY
SERIES
MODEL WBH16EAWD
AWD p OWER Buggy
(Ep A B & S VANgu ARD 18 Hp g ASOLINE ENg INE
ELECTRIC START)
Effective Serial No. 130901
(Manufactured - 2013 and later)
Revision #0 (09/09/13)
To find the latest revision of this
publication, visit our website at:
www.multiquip.com
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
Summary of the content on the page No. 2
pROpOSITION 65 WARNINg Engine exhaust and some of itsconstituents,andsomedustcreated by power sanding, sawing, grinding, drillingandotherconstructionactivities containschemicalsknowntotheState of California to cause cancer, birth defects and other reproductive harm. Someexamplesofthesechemicalsare: Leadfromlead-basedpaints. Crystallinesilicafrombricks. Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber. Yourriskfromtheseexposuresvaries, dependingonhowoftenyoudothistype
Summary of the content on the page No. 3
NOTES WBH16ea WD epa po Wer B uggy • operation anD parts manual — rev. #0 (09/09/13) — page 3
Summary of the content on the page No. 4
TABLE Of CONTENTS Drawings WBH16EAWD power Buggy Proposition 65 Warning ........................................... 2 Nameplates And Decals ................................... 36-37 Table Of Contents .................................................... 4 Hydraulic Drive Assy. ........................................ 38-39 Parts Ordering Procedures ...................................... 5 Hydraulic Pump Assy. ....................................... 40-41 Safety Information .......................
Summary of the content on the page No. 5
pARTS ORDERINg pROCEDuRES Ordering parts has never been easier! Choose from three easy options: Effective: st January 1 , 2006 Best Deal! order via internet (Dealers only) : If you have an MQ Account, to obtain a Username Order parts on-line using Multiquip’s SmartEquip website! and Password, E-mail us at: parts@multiquip. com. View Parts Diagrams To obtain an MQ Account, contact your Order Parts District Sales Manager for more information. Print Specifi cation Information Use the int
Summary of the content on the page No. 6
SAfETy INfORMATION Do not operate or service the equipment before reading Potential hazards associated with the operation of this the entire manual. Safety precautions should be followed equipment will be referenced with hazard symbols which at all times when operating this equipment. may appear throughout this manual in conjunction with Failure to read and understand the safety safety messages. messages and operating instructions could Symbol Safety Hazard result in injury to yourself and o
Summary of the content on the page No. 7
SAfETy INfORMATION general saFety NOTICE Caution This equipment should only be operated by trained and qualifi ed personnel 18 years of age and older. never operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, Whenever necessary, replace nameplate, operation and hearing protection, steel-toed boots and other protective safety decals when they become diffi cult read. devices required by the job or city and state regulations. Manu
Summary of the content on the page No. 8
SAfETy INfORMATION poWer Buggy saFety Caution alWays inspect the surface over which you will travel. Danger Look for holes, drop-offs and obstacles. Look for rough Engine fuel exhaust gases contain poisonous carbon and weak spots on docks, ramps or fl oor. Look for oil monoxide. This gas is colorless and odorless, and can spills, wet spots and slippery surfaces. Look for soft soil, cause death if inhaled. deep mud and standing water. Watch for anything that might make you lose
Summary of the content on the page No. 9
SAfETy INfORMATION Do not operate the power buggy at excessive speeds. alWays block the power buggy with appropriate blocks Reckless operation may cause accidents and severe when leaving the power buggy parked on a slope. injury. Slow down when approaching people, wet areas, To prevent unexpected loss of control, Do not start and going up and down grades. It is the responsibility of engine on a sloping surface. the operator to adjust speed, as necessary, depending on the conditions of
Summary of the content on the page No. 10
SAfETy INfORMATION alWays use extreme caution when working with engine saFety fl ammable liquids. Warning Do not fi ll the fuel tank while the engine is running Do not place hands or fingers inside or hot. engine compartment when engine is Do not overfi ll tank and tighten fuel cap until you hear running. "clicking", since spilled fuel could ignite if it comes into never operate the engine with heat shields or contact with hot engine parts or sparks from the ignition guards re
Summary of the content on the page No. 11
SAfETy INfORMATION alWays recharge the battery in a well-ventilated transporting saFety environment to avoid the risk of a dangerous concentration NOTICE of combustible gases. alWays shutdown engine before transporting. If the battery liquid (dilute sulfuric acid) comes into contact with clothing or skin, Tighten fuel tank cap securely and close fuel cock to rinse skin or clothing immediately with prevent fuel from spilling. plenty of water. When transporting of the power buggy
Summary of the content on the page No. 12
SpECIfICATIONS t able 1. specifications (power Buggy) Model WBH16EAWD Wheelbase 44 in. (1117.6 mm) Overall Length 103 in. (2616.2 mm) Overall Width- Dual Wheels 43.25 in. (1098.6 mm) Overall Width - Single Wheels 30.25 in. (738.65 mm) Overall Height 53 in. (1346.2 mm) Operating Weight 1,200 lbs. (544.2 kg.) Bucket Capacity 16 cu. ft. Water Level (.59 cu. yd.) Weight Capacity 2500 lbs. (1136 kg) Engine 18HP Briggs and Stratton Vanguard Starting Recoil & Electric Drive Hydrostatic Top Speed (Stand
Summary of the content on the page No. 13
SpECIfICATIONS t able 2. specifications (engine) Model Briggs and Stratton Vanguard 2.82 x 2.75 in. Bore X Stroke 71.88 x 69.85 mm Displacement 570 cc Maximum Power 18.0 hp (3,600 rpm) 31.70 ft-lbs. (2,800 rpm) Maximum Torque 14.37 kgf-m (2,800 rpm) Idle Speed 1,400 ± rpm Maximum No Load RPM 3600 ± 100 rpm 1.64 gals./hr. Specific Fuel Consumption (6.05 liters/hr.) 4.5 gallons Fuel Tank Capacity (17.03 liters) 3.52 pints Crankcase Oil Capacity (1.66 liters) Starting System Recoil/Electric 0.
Summary of the content on the page No. 14
DIMENSIONS siDe vieW rear vieW Figure 1. WBH16EAWD Dimensions page 14 — WBH16ea WD epa po Wer B uggy • operation anD parts manual — rev. #0 (09/09/13)
Summary of the content on the page No. 15
gENERAL INfORMATION The MQ Whiteman All-Wheel Drive (AWD) Power Buggy, This hydraulic circuit provides equal power distribution to Model WBH16EAWD (electric start) is intended for the the front drive motors, greatly improving performance in transportation of concrete, concrete spreading and spot poor traction conditions such as sand, mud or loose gravel. pouring. In addition, the WBH16EAWD is designed for This system should only be used as needed and for short landscaping applications, mater
Summary of the content on the page No. 16
COMpONENTS Figure 2. WBH16EAWD Power Buggy Components 1. t ub or Bucket — Used for the transportation of 10. engine — This machine uses either an electric or a material. Tub holds approximately 16 cubic feet (0.59 recoil start Briggs & Stratton 18HP Vanguard engine. cubic yards) of water. 11. Dump pedal — Use this pedal to place the tub in the 2. Handle Bar (steering) — This handle bar is used dump position (vertical). Press pedal a second time to to steer the buggy. When driving the bugg
Summary of the content on the page No. 17
BASIC ENgINE Figure 3. Briggs & Stratton Vanguard 18HP Engine 1. oil Fill Cap — Remove cap to refill or replace oil with 10. ignition switch — Insert the ignition key here to start recommended type as listed in Table 3. Make sure cap the engine. Turn the key clockwise to the ON position is tightened securely. Do not over fill. then continue turning clockwise to the START position and release. To stop the engine, turn the key fully 2. o il Dipstick — Remove to check amount and condition coun
Summary of the content on the page No. 18
INSpECTION BeFore starting t able 3. oil t ype season t emperature oil t ype 1. Read safety information at the beginning of manual. Summer 25°C or Higher SAE 10W-30 2. Clean the machine, removing dirt and dust, particularly Spring/Fall 25°C~10°C SAE 10W-30/20 the engine cooling air inlet, carburetor and air cleaner. Winter 0°C or Lower SAE 10W-10 3. Check the air filter for dirt and dust. If air filter is dirty, replace air filter with a new one. gasoline CHeCK 4. Check carburetor for exter
Summary of the content on the page No. 19
INSpECTION parKing BraKe CHeCK Check the brakes as outlined in the maintenance section of this manual. linKage CHeCK Check and make sure that all linkages within the buggy are functioning correctly. steering CHeCK 1. Check and make sure that the power buggy's steering turns freely and that there is no binding. 2. Make sure that the zerk fitting for the steering has been lubricated. Dump CylinDer CHeCK 1. Check the power buggy's dump cylinder as outlined in the operation section of this manu
Summary of the content on the page No. 20
OpERATION 4. Insert the ignition key into the ignition switch (Figure 10). Caution Turn the key to the ON position then to the START Do not attempt to operate the power position. Release the key when the engine starts. buggy until the Safety Information, General Information, and Inspection sections of this manual have been read and thoroughly understood. eleCtriC start 1. Before attempting to start the power buggy, make sure Figure 10. Ignition Switch that the safety kill switch (Figur
