Summary of the content on the page No. 1
®
zūmo 200 series
quick start manual
for use with the zūmo 220
Summary of the content on the page No. 2
Your zūmo Power button: Press and hold to turn on/off the zūmo. Press quickly to adjust the backlight GPS antenna brightness. Battery cover Speaker Serial number under the battery Battery contacts Release key: Slide up to open the battery cover . Mini-USB connector under ™ microSD card slot the weather cap under the battery zūmo 0 Quick Start Manual
Summary of the content on the page No. 3
Important Information Getting Started Installing the Battery ‹ Warning 1. Locate the lithium-ion battery that came in the See the Important Safety and Product product box. Information guide in the product box for product 2. Slide the release key up to open the battery warnings and other important information. cover on the back of the zūmo. This product contains a lithium-ion battery. 3. Locate the metal contacts on the end of the To prevent the possibility of personal injury or lithium-
Summary of the content on the page No. 4
2. Plug the vehicle power cable into the mini- Connecting Power to the zūmo USB connector. 1. Pull back the weather cap from the mini-USB connector located on the back of your zūmo. 3. Snap the cradle onto the suction cup arm. 2. Plug the vehicle power cable into the mini- 4. Remove the clear plastic from the suction USB connector. cup. Clean and dry your windshield and the suction cup with a lint-free cloth. Charging Your zūmo 5. Place the suction cup on the windshield. Charge your zūmo fo
Summary of the content on the page No. 5
NOTE: The recommended torque is 50 lbf-in. Mount Your zūmo on the Do not exceed torque of 80 lbf-in. Motorcycle Handlebar ‹ Warning base Incorrectly wiring the power cable with bare Handlebar wire leads can result in damage to the vehicle or U-bolt the battery and can cause bodily injury. Garmin strongly recommends having an experienced installer with the proper knowledge of electrical systems install the unit. Notice Installing the handlebar base to the clutch/ To avoid draining the
Summary of the content on the page No. 6
Cradle Base plate W ashers Nuts Panhead screws S p a c e r s Attach the Base Plate to the zūmo Cradle Mount 1. Thread the M4 × 40 mm panhead screws Base plate through the washers, cradle, spacers, and base plate. 2. Tighten the nuts to secure the base plate. Double-socket arm Attach the Base Plate to the Handlebar Base 1. Align the ball of the handlebar base and the ball of the base plate with the double-socket Knob arm. 2. Tighten the knob slightly. 3. Adjust for better viewing and operat
Summary of the content on the page No. 7
Install Your zūmo in the Mount Configuring the zūmo 1. Fit the bottom of your zūmo into the cradle. To turn on your zūmo, press and hold . Follow 2. Tilt the zūmo back into the cradle. the on-screen instructions. 3. Press down the release lever. Release lever Acquiring Satellites Go outdoors to an open area, out of garages, and away from tall buildings. Stop your vehicle, and Cradle turn on the zūmo. Acquiring satellite signals may take a few minutes. The bars indicate satellite strength.
Summary of the content on the page No. 8
Finding Points of Interest Using the Menu Page 1. Touch Where To? > Points of Interest. ➍ ➊ 2. Select a category. ➋ ➌ ➎ 3. Select a destination, and touch o! g . To search by name, touch Where To? > Points ➏ ➐ of Interest > Spell Name. To search in a different area, touch Where To? ➑ > Near. ➒ Using the Go! Page ➊ GPS satellite strength. ➋ Bluetooth headset status. NOTE: Pages appear differently based on your usage mode and settings. ➊ ➋ ➌ Touch to change usage mode. ➍ Battery status. ➍
Summary of the content on the page No. 9
Using the Map Page ➋ Touch the text Your route is marked with a magenta line. bar to view the As you travel, your zūmo guides you to your turn list. destination with voice prompts, arrows on the map, and directions at the top of the map. A checkered flag marks your destination. If you depart from the original route, your ➌ Touch to zoom zūmo recalculates the route and provides new in and out. directions. ➍ Touch the vehicle icon to ➊ ➋ view the Where Am I? page. ➌ ➎ Touch to ➍ vi
Summary of the content on the page No. 10
Taking a Detour Navigating Off Road If the road ahead is closed, you can take a detour. When you choose a destination while the off road feature is enabled, the zūmo plots a straight NOTE: Detour is not available when navigating line to the destination. off road. 1. Touch Tools > Settings > Navigation. 1. With a route active, touch Menu. 2. Under Route Preference, touch Off Road. 2. Touch Detour. Customizable The zūmo attempts to find an alternate route data fields Heading that avoids t
Summary of the content on the page No. 11
5. Touch OK on the zūmo. Contact Garmin 6. Select your headset, and touch OK. Contact Garmin if you have any questions while 7. Enter the Bluetooth PIN for your headset, if using your zūmo. In the USA, go to www necessary, and touch Done. .garmin.com/support, or contact Garmin USA by phone at (913) 397-8200 or (800) 800-1020. 8. Touch OK. In the UK, contact Garmin (Europe) Ltd. by ® Using TracBack phone at 0808 2380000. Touch Where To? > TracBack to view your In Europe, go to www.garmin.co
Summary of the content on the page No. 12
® ® ® Garmin , the Garmin logo, zūmo , and TracBack are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other ™ countries. Garmin Lock is a trademark of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express ™ permission of Garmin. microSD is a trademark of the SD Card Association. Other trademarks and trade names are those of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of
