Summary of the content on the page No. 1
Integrated Flight Deck
Cockpit Reference Guide
Diamond
DA40/40F
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Copyright © 2004-2006 Garmin Ltd. or its subsidiaries. All rights reserved. This manual reflects the operation of System Software version 0369.11 or later for the Diamond DA40, DA40F. Some differences in operation may be observed when comparing the information in this manual to earlier or later software versions. Garmin International, Inc., 1200 East 151st Street, Olathe, Kansas 66062, U.S.A. Tel: 913/397.8200 Fax: 913/397.8282 Garmin AT, Inc., 2345 Turner Road SE, Salem, OR 97302, U.S.A.
Summary of the content on the page No. 4
WARNINGS, CAUTIONS, & NOTES WARNING: Navigation and terrain separation must NOT be predicated upon the use of the terrain function. The G1000 Terrain Proximity feature is NOT intended to be used as a primary reference for terrain avoidance and does not relieve the pilot from the responsibility of being aware of surroundings during flight. The Terrain Proximity feature is only to be used as an aid for terrain avoidance and is not certified for use in applications requiring a certified terra
Summary of the content on the page No. 5
WARNINGS, CAUTIONS, & NOTES WARNING: The Garmin G1000, as installed in the Diamond DA40 aircraft, has a very high degree of functional integrity. However, the pilot must recognize that providing monitoring and/or self-test capability for all conceivable system failures is not practical. Although unlikely, it may be possible for erroneous operation to occur without a fault indication shown by the G1000. It is thus the responsibility of the pilot to detect such an occurrence by means of c
Summary of the content on the page No. 6
WARNINGS, CAUTIONS, & NOTES NOTE: All visual depictions contained within this document, including screen images of the G1000 panel and displays, are subject to change and may not reflect the most current G1000 system. Depictions of equipment may differ slightly from the actual equipment. NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any int
Summary of the content on the page No. 7
RECORD OF REVISIONS Part Number Change Summary 190-00324-00 Initial Release 190-00324-01 Reformat of manual Added NAV/COM volume levels Added Flight Timer Added extended range fuel tanks Changed NAV1 and NAV2 on the PFD to VOR or LOC Moved altitude and airspeed trend vectors to opposite sides 190-00324-02 Added WX 500 Stormscope Added XM Weather Added ADF/DME Added bearing pointers Added fixed pitch propeller engine parameters Updated fixed pitch propeller engine parameters. Added reference to DA4
Summary of the content on the page No. 8
RECORD OF REVISIONS Blank Page RR-2 Garmin G1000 Cockpit Reference Guide for the DA40/40F
Summary of the content on the page No. 9
TABLE OF CONTENTS 4.3 Automatic Squelch ................................................. 4-3 SECTION 1: SYSTEM OVERVIEW .................................... 1-1 4.4 Quickly Activating 121.500 MHz .......................... 4-3 1.1 PFD/MFD Controls ................................................... 1-2 4.5 Optional NAV Radios ............................................. 4-3 1.2 PFD Softkeys ............................................................ 1-4 ADF Radio (optional) ..................
Summary of the content on the page No. 10
TABLE OF CONTENTS Approach Mode (GPS, VAPP or LOC) .......................... 6-12 Quickly Tune the COM Transceiver to a Nearby Go Around (GA) ........................................................ 6-12 Airport Frequency ................................................... 7-6 6.7 Example Procedures Using AFCS ....................... 6-13 Nearest Airports Information on the PFD ...................... 7-6 Departure ................................................................. 6-14 View Info
Summary of the content on the page No. 11
TABLE OF CONTENTS 8.7 Create a New Flight Plan ...................................... 8-3 10.4 Terrain And Obstacle Proximity ........................ 10-6 Create a New Flight Plan Using the MFD ..................... 8-3 Displaying Terrain and Obstacles on the Terrain Create a New Flight Plan Using the PFD ...................... 8-4 Proximity Page .......................................................... 10-6 8.8 Load a Departure ................................................... 8-4 Displayi
Summary of the content on the page No. 12
TABLE OF CONTENTS 12.6 G1000 System Message Advisories .................. 12-8 MFD & PFD Message Advisories ................................. 12-9 Database Message Advisories .................................. 12-10 GMA 1347 Message Advisories ............................... 12-11 GIA 63 Message Advisories ..................................... 12-11 GEA 71 Message Advisories .................................... 12-13 GTX 33 Message Advisories ..................................... 12-14 GRS 77 Me
Summary of the content on the page No. 13
SECTION 1 SYSTEM OVERVIEW This guide gives the pilot abbreviated operating SECTION 1: SYSTEM OVERVIEW instructions for the Primary Flight Display (PFD), Multi Function Display (MFD), and the GMA 1347 Audio Panel The purpose of this Cockpit Reference Guide is to System. provide the pilot a resource with which to find operating instructions on the major features of the G1000 system NOTE: The pilot should read and thoroughly more easily. It is not intended to be a comprehensive understan
Summary of the content on the page No. 14
SECTION 1 SYSTEM OVERVIEW 1.1 PFD/MFD CONTROLS 1 2 3 4 5 6 7 8 9 17 Figure 1-1 PFD/MFD Controls 18 14 10 19 24 11 15 20 25 12 16 21 13 22 26 23 27 MFD Only (with optional GFC 700) 1-2 Garmin G1000 Cockpit Reference Guide for the DA40/40F
Summary of the content on the page No. 15
SECTION 1 SYSTEM OVERVIEW PFD and MFD controls function the same with the percentage. exception of the dedicated Automatic Flight Control (10) Direct-to Key – Allows the user to enter a destination System (AFCS) keys located only on the MFD bezel. waypoint and establish a direct course to the selected destination (specified by the identifier, chosen from the (1) NAV VOL/ID Knob – Controls the NAV audio level. active route, or taken from the map pointer position). Press to turn the Morse co
Summary of the content on the page No. 16
SECTION 1 SYSTEM OVERVIEW (optional) (16) ENT Key – Accepts a menu selection or data entry. INSET PFD OBS CDI ADF/DME XPDR IDENT TMR/REF NRST ALERTS This key is used to approve an operation or complete data entry. It is also used to confirm selections and information entries. Figure 1-2 PFD Top Level Softkeys (17) Dual ALT Knob – Sets the selected altitude in the INSET – Press to display the Inset Map in the lower box located above the Altimeter. The large knob selects left corner
Summary of the content on the page No. 17
SECTION 1 SYSTEM OVERVIEW INSET (optional) (optional) OFF DCLTR TRAFFIC TOPO TERRAIN NEXRAD XM LTNG BACK ALERTS Press the BACK or OF F Softkey to return to the top level DCLTR-1 softkeys. DCLTR-2 DCLTR-3 Figure 1-3 PFD Softkey Flow Chart – 1 PFD (optional) DME BRG1 360 HSI ARC HSI BRG2 BACK ALERTS METRIC DFLTS STD BARO Press the DFLTS Softkey to change the PFD Press the STD BARO or BACK Softkey metric values to standard to return to the top level softkeys Figure 1-4 PFD Softkey Flow Chart
Summary of the content on the page No. 18
SECTION 1 SYSTEM OVERVIEW STD BARO – Press to set the barometric pressure to in the U.S.A., refer to ICAO standards for VFR 29.92 inches of mercury (1013 hPa by pressing codes in other countries). the METRIC Softkey). CODE – Press to display transponder code selection BACK – Press to return to the previous level softkeys 0-7. softkeys. 0 through 7 – Press numbers to enter code. ALERTS – Press to display the Alerts Window. Press the BACK Softkey to return to the top level softkeys Press the BA
Summary of the content on the page No. 19
SECTION 1 SYSTEM OVERVIEW IDENT – Press to provide special aircraft position 1.3 MFD SOFTKEYS identification to Air Traffic Control (ATC). ENGINE – Pressing this softkey makes available TMR/REF – Press to display the Timer/References the LEAN and SYSTEM Softkeys which in turn Window. access the Lean Display and the System Display, NRST – Press to display the Nearest Airports respectively. Window. MAP – Pressing this softkey enables the following ALERTS – Press to display the Alerts Window
Summary of the content on the page No. 20
SECTION 1 SYSTEM OVERVIEW TRAFFIC – Pressing this softkey displays/ 1.5 BACKLIGHTING removes Traffic on the Navigation Map. When system power is turned off, all manual TOPO – Pressing this softkey displays or backlighting settings will return to the factory default removes topographic information on the settings. Navigation Map. TERRAIN – Pressing this softkey displays/ Manually adjust the backlight for the PFD removes terrain and obstacle data on the and MFD: Navigation Map. 1) Press the M
