Summary of the content on the page No. 1
User Guide
X350
rd
3 edition (rev. 2)
www.binatonegps.com
Binatone Navigation software
Summary of the content on the page No. 2
IMPORTANT IMPORTANT Satellite signals are required for this product to function in Navigation Mode. There may be occasions within your home or surrounding area when the signal strength is limited and Navigation Mode may not be possible. This is quite normal for product of this type. If you experience difficulty in receiving a signal in your car you may need to use an external antenna {optional). You can check the number of satellite signals that the unit is receiving and the strengt
Summary of the content on the page No. 3
SAFETY Safety The Global Positioning System The Global Positioning System (GPS) is a satellite based system that provides location and timing information around the globe. GPS is operated and controlled under the sole responsibility of the Government of the United States of America, who are responsible for its availability and accuracy. Any changes in GPS availability and accuracy, or in environmental conditions, may impact the operation of you Binatone Carrera Personal Navigatio
Summary of the content on the page No. 4
CONTENTS CONTENTS Important………………………………………………………………………. 01 In the Box ……….………………………………………………………... 01 Safety …………………………………………………………………………… 02 The Global Positioning System …………………………………………… 02 Using Your PND in the Car .…………………………………………….. 02 Prohibited Areas .…………………………………………………….…… 02 Battery..…………………………………………………………………….. 02 Contents .………………………………………………………………………. 03 Quick Start Guide …………………………………………………………… 05 Position of the Controls ………………………………………………… 05 Charging the B
Summary of the content on the page No. 5
CONTENTS Navi/Simulate …………………………………………………………….. 26 Navigation Screen…………………………………………………... 27 Navigation Options…………………………………………………. 28 View Route ……………………………………………………… 28 Navi Settings…………………………………………….……... 28 Save Map View………………………………………………… 29 Night/Day ……………………………………………………….. 30 3D/2D …………………………………………………………… 30 Brightness….…………………………………………………… 30 Volume …………………………………………………………. 30 Road Block……………………………………………………... 30 Trace Record…………………………………………………… 30 GPS Status ……
Summary of the content on the page No. 6
QUICK START GUIDE Quick Start Guide Please make sure that your read all of the information contained within this user guide before operating this unit. If you experience any problems, please go through the user guide before contacting the customer helpline. Position of the controls 1. Touch Screen 2. Charge Indicator – Displays the battery charging status. Red; charging, Green; fully charged. 3. On/Off Switch – Turn the unit On/Off using this switch, if the unit is not to
Summary of the content on the page No. 7
QUICK START GUIDE Charging the Battery Before using your PND for the first time, we recommend you to charge the unit for 5 hours via the USB cable or 2 hours via the car charger in order to charge the battery. Plug the USB cable or the car charger into the USB socket . The red charging indicator on the front of the unit will light up. When the unit is fully charged the red light will turn green. When you use the PND in you car, we recommend that you always use the car charg
Summary of the content on the page No. 8
QUICK START GUIDE Turning the Sat Nav Unit On/Off To switch the unit On slide the power switch located on the back of the unit to the On position, the unit will power up and display the warning screen. To switch the unit Off slide the power switch to the Off position. Turning the Sat Nav Unit Off Via Sleep Mode Press and hold down the sleep button on the top of the unit, after about 3 seconds the unit will enter sleep mode. Press and hold the button again, to bring the unit out o
Summary of the content on the page No. 9
QUICK START GUIDE Windscreen Holder Installation The car mount has a suction pad that fits to the windscreen or a flat area on the dashboard. A. Fitting to windscreen Pull the lever away from the suction pad. Place the pad on the widescreen and push the lever towards the pad until it clicks into place. B. Fitting the holding bracket It is best to fit this to the unit before it is attached to the windscreen. Slide the bracket onto the securing lug on the end of the ball m
Summary of the content on the page No. 10
GETTING STARTED Starting Up Turn the power switch to ON. The following screens will be displayed: When you press MENU, the following screens will be displayed: 9 Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate)
Summary of the content on the page No. 11
GETTING STARTED Settings NOTE: You do not need to enter the SETTINGS menu before you start to navigate. If you press on the SETTINGS icon the following screen is displayed. To exit this page or exit any subsequent page, press the cross at the top of the screen. Volume Press ’volume’ you can modify the volume level of the voice prompts. You can increase or decrease the level by clicking “ ” or “ ”. This can also be done via the navigation software later. Backl
Summary of the content on the page No. 12
GETTING STARTED Default Reset to factory default settings. Calibrate This function calibrates the unit to respond to your screen taps. You will need to use this function only if the unit begins to respond inconsistently to your screen taps, then follow the on screen dissections. Once the calibration has been completed, press anywhere on the screen to return to the previous menu. Multi Media NOTE: if you press on the MULTI MEDIA icon the following screen is displayed. Pict
Summary of the content on the page No. 13
GETTING STARTED Document Viewer This device supports, txt file format viewing only. Press the “Doc Viewer” to show the list of files available for viewing. The procedure for viewing documents is the same for viewing pictures. But once loaded the following screen will be shown. GPS Receiver NOTE: This page is for information only. You can view the number of satellite signals the unit is receiving also the strength of these signals.
Summary of the content on the page No. 14
GETTING STARTED NOTE: At least four GPS signals are required for the PND to function. There may be occasions within your home or surrounding area when the signal strength is limited and GPS navigation may not be possible. This is quite normal of products of this type. Your car may have an athermic heat reflecting windscreen or heated windscreen that prevents the GPS receiver acquiring a valid signal. In these cases you may have to use and external antenna (sold separately). Extern
Summary of the content on the page No. 15
INTRODUCTION Introduction You have chosen a cutting-edge navigation system. Congratulations! Please enjoy using it. This navigation system leads you straight to your destination, whether you are travelling by car or on foot. You can navigate and plan your route with an easy- to-use and intuitive interface, just by using your finger. You can also use this application to plan your trip to suit your personal preferences and interests and to save interesting destinations before your set of
Summary of the content on the page No. 16
NAVIGATION MENU Getting Started Please make sure that the battery in your device is charged. Switch on the unit and from the menu select Navigation. The navigational software will start to load. You will first see the warning statement screen tap on “I accept” to confirm that you have read the statement and to continue. If you do not wish to be shown this screen in the future check the box next to “Don’t show this statement again”. You will now be shown the Binatone screen, which
Summary of the content on the page No. 17
NAVIGATION MENU Navigate to – Opens the destination page. From here you can select a point to navigate to or you can select a start/destination point and then simulate the route between them, just as if you were driving it. You can also gain access to the route options so that you can set your driving preferences. Go Home – This allows you to navigate to your home in one simple button press. Note: you will have to first set your home address via the settings menu first. Edit Favo
Summary of the content on the page No. 18
NAVIGATION MENU Navigate to Tap this option to begin any journey or if you wish to set up a route simulate. The screen will change to the Route Planning menu. Navi – Used to navigate to a destination, via a number of waypoints if also set. Simulate – Used to plan a route which can then be simulated. Route options – Opens the route options menu allowing you to set your preferred driving preferences. Up/Down arrow – Used to scroll to view the list of waypoints/destinati
Summary of the content on the page No. 19
NAVIGATION MENU Entering your Waypoints/destination Tap on the next empty list slot, this is the list item which says “Click here to add a new destination”. This will always appear in the next available list slot, when in simulate the first list slot will have the text “Click here to set the starting point”. The Search From screen will appear allowing you to choose your waypoint/destination from several different methods. Note: The unit will remember the last waypoints/destin
Summary of the content on the page No. 20
NAVIGATION MENU When entering information into the search as well as just characters you have the following special keys. To enter a space in an entry tap the button which is blank shown on the bottom row. To delete a character Tap the DEL button. To Change between Characters/Digits and Special Characters. Tap the key to scroll between the available options. The order of the options is ABC, ÄÖÜ, 123. The key will always show the next selectable option. Use the keypad to start to enter
