Apollo GX50 user manual

Summary of the content on the page No. 1

Apollo GX50 Quick Reference Guide
Apollo GX50 Quick Reference Guide
Moving Map (MAP)
Navigation (NAV) Nearest Waypoint (NRST) Waypoint Information
(INFO)
Press NAV Press NRST
Press MAP
Press INFO
Map plus Nav
ETE, CDI, BRG, &
Airport (ARPT)
RGE
Ident, Type,
Map Only
& City/Facility Name
RAIM* VOR
SAR Map*
Altitude Assist
Bearing & Dist
NDB
Map Setup
Parallel Track (PTK)
Route Line, Map Orient,
Frequencies
INT
& Map Reference
GPS Position
Type & Elevation
LocDME Symbol & ID Setup
Countdown Timer

Summary of the content on the page No. 2

Messages (MSG) Database (DB) Flight Plan (FPL) Press FPL Press MSG Press DB New Active FPL Create WPT by Lat/Lon New Msg 1 FPL #1 . Create WPT by Radial/Dist . . . . Update User Wpt w/PPos . New Msg n FPL #30 Create Wpt by Grid (SAR Only) Old Create New FPL Old Msg 1 Delete User WPT . . Modify User WPT . Old Msg n Delete WPT Comment Access Database System (SYS) Press SYS. Turn LARGE Knob, then press ENTER. Nav Info System Info GPS Sensor Misc Sensors Autonav Time Date/Time Healthy & Visible Sate

Summary of the content on the page No. 3

Creating a Flight Plan Activating a Flight Plan Finding Info On A Waypoint 1. Press FPL. 1. Press DB. 1. Press FPL. Turn LARGE knob to the “Create New Flight Plan” 2. Turn the LARGE knob to the 2. Turn the LARGE knob to the page and then press ENTER. desired active flight plan and Access Database page and press SEL. press ENTER. 2. To enter a new plan name, press SEL. 3. Turn the SMALL knob to 3. Turn the SMALL knob to select select the desired option and 3. Turn the SMALL knob to select waypoin

Summary of the content on the page No. 4

Approach Checklist Approach Setup Summary Location Action A. Load Destination Airport Enroute Load Approach Load a destination airport. Load a stored Within 30 nm of Enable Approach & enter altimeter setting Flight Plan, or edit the active Flight Plan. Destination (Approach annunciator turns ON) You may also use the DIRECT-TO button (CDI goes to 1 nm full-scale sensitivity) to choose a destination. The destination must be an airport that has an established IAF Active Waypoint Verify Approach ann