Summary of the content on the page No. 1
Use & Care Guide
®
Liquid Propane Gas (LPG) Grill
Kenmore Model Number: 119.16301800
KmartItem Number: 640-810979-112
• Safety
• Assembly
• Use and Care
• Cooking Guide
• Espa_ol, Pg. 30
• Parts and Service
Failure to comply with these instructions could
Call us first if you have any problem with this
result in a fire or explosion that could cause
product. We can help you with questions about
serious bodily injury, death or property damage.
assembly and grill operation or if there are
damaged or
Summary of the content on the page No. 2
Primary Safety Warnings ................................... 1-3 IF YOU SHELL GAS: Warranty Information ............................................ 2 Pre-Assembly Instructions .................................... 3 Shut off gas to the appliance. Part Diagram and Lists ...................................... 4-9 Extinguish any open flame. Assembly Instructions ................................... 10-18 Open lid. Use & Care Instructions ................................ 19-27 If odor continues, keep
Summary of the content on the page No. 3
DONOT lightthisgrillwithoutfirstreading Theinstallation mustconform withlocalcodes or, theLighting Instructions. inthe absence of local codes, with either the DONOT lightthisgrillwithoutchecking the National Fuel Gas Code, ANSI Z223.1/NFPA 54, burner tubesforblockage thatcouldhave or CAN/CGA B149.1, Natural Gas and Propane occurred duringshipment. SeetheCleaning Installation Code, or Propane Storage and andHaintenance Instructions. Handling Code, B149.2. All electrical accessories (such as a rot
Summary of the content on the page No. 4
PART# PART DESCRIPTION QTY PURPOSE OF PART SB0064 Phillips Head Bolt,M6x35mm 4PCS Attaches Cabinet Front Crossbar Install Casters, Attaches Firebox Assembly, Side SB0027 Phillips Head Bolt,M6xl6mm 24PCS Burner Assembly and Side Shelf Assembly Attach the Firebox Assembly to the Cabinet FEOI05 M6xl.OT Plastic Washer 4PCS Assembly There are 8 Washers used with some Phillips head SBO005 Lock Washer, M6 8PCS bolts Attaches the Door Top Brackets to the Cabinet Assembly, Attaches Side Burner Control Pa
Summary of the content on the page No. 5
Plastic Washer M6xl,0T Phillips Head Bolt M6x35mm Qty: 4 Qty: 4 Part # SB0064 Part # FE0105 "S"- Hook Qty: 3 Part # SE0123D-002 Lock Washer M6 Qty: 8 Phillips Head Bolt M6x16mm Part # SB0005 Qty: 24 Part# SB0027 Battery Size: AA Qty: 1 Part # SE0007 Lock Washer M4 Phillips Head Bolt M4x8mm Qty: 14 Qty: 22 Part # SB0016 Part # SB0085 Cotter Pin Qty: 2 Part # SE9049D-001 Washer M4 Qty: 4 Part # SB0114 Door Top Brackets (L/R) Qty: 2 Part# B06WlB-6-C5 Cabinet Door Stop Qty: 1 Part# B06WlB-6-C7 Phill
Summary of the content on the page No. 6
Summary of the content on the page No. 7
KEY DESCRIPTION PART# QTY A Hood Assembly AI Hood LeftSide Panel CAOO44-L 1 A2 Hood Right Side Panel CA0044-R 1 A3 Thermometer Seat CA0045D-002 1 A4 Thermometer SE0076 1 A5 Hood Bolt B06WlB-6-A5 2 A6 Hood Handle Seat - Right B06WlB-6-A6 1 A7 Hood Handle Seat- Left B06WlB-6-A7 1 A8 Hood Handle Heat Insulator FE0010 2 A9 Silicon Stopper FE0001M 4 A10 Hood Outer Panel B070E4-A10 1 All Hood Inner Panel B070E4-All 1 A12 Hood Handle B070E4-A12 1 B Firebox Assembly B1 Firebox Rear Upper Panel B070E4-B1
Summary of the content on the page No. 8
KEY DESCRIPTION PART# QTY B19 Main Burner Control Panel B070E4-R-B19 1 B20 Control Knob Seat B06W1B-6-B20 3 B21 Control Knob FE0090D-001 3 B22 Electronic Igniter Button SE0131- A 1 B23 Electronic Igniter SE0131 1 B24 Electronic Igniter Wire Set B070E4-B24 4 B25 Regulator and Hose Assembly SE0148 1 C Cabinet Assembly C1 Cabinet Rear Panel B070E4-C1 1 C2 Cabinet Assembly B070E4-C2 1 C3 Regulator and Hose Support Ring B06W1B-6-C3 1 C4 Leg Caps FE0093 4 C5 Door Top Bracket Set B06W1B-6-C5 2 C6 Cylin
Summary of the content on the page No. 9
KEY DESCRIPTION PART# QTY D4 Side Burner Stopper SB0045D-001 2 D5 Side Burner Inner Frame B06WIB-6-D5 1 D6 Towel Bar Handle B06WlB-6-D6 1 D7 Side Burner Outer Frame Assembly B070E4-D7 1 D8 Side Burner Electrode B06WlB-6-D8 1 D9 Side Burner Valve B06WlB-6-D10 1 D10 Side Burner B06WlB-6-D9 1 Dll Side Burner Control Panel B070E4-R-Dll 1 D12 Control Knob Seat B06WlB-6-B20 1 D13 Control Knob FE0090D-001 1 E Side Shelf Assembly E1 Side Shelf Frame Assembly B06WlB-6-E1 1 E2 Towel Bar Handle B06WlB-6-D6
Summary of the content on the page No. 10
Remove Firebox from Cabinet !! [] Unscrew and discard the 6 Phillips Head Bolts and Washers from the corner holes of the cabinet. Remove the crossbar. [] Carefully lift the cabinet up from the firebox and set on cardboard. Remove all foam packing from cabinet. [] Cut fastening straps on lid handle. Raise lid and remove and unpack parts inside firebox. Crossbar Install Control Knobs and Casters [] Push the Control Knobs onto the valve stems. See Inset 1, [] Place the Cabinet Assembly upside down
Summary of the content on the page No. 11
N nstall Cabinet Front Crossbar and Door Top Brackets [] Attach the Cabinet Front Crossbar to the Cabinet using 4 Phillips Head Bolts (M6x35mm) and 4 Lock Washers (M6), [] Attach Door Top Brackets labeled L and R to the Cabinet using 4 Phillips Head Bolts (M4x8mm), Phillips Head Bolt: M6x35mm Qty: 4 Phillips Head Bolt M4x8mm Qty: 4 © Lock Washer M6 qty: 4 Door Top Brackets (L/R) Qty: 2 Attach Doors to Cabinet [] Push down on top hinge pin to insert the Left and Right Doors into the cabinet. See
Summary of the content on the page No. 12
Hang Condiment Basket and attach Cabinet Door Stop [] Hang Condiment Basket on the inside of cabinet Right Door, See Inset 1. [] Attach the Cabinet Door Stop to the front of cabinet bottom using 2 Phillips Head Bolts (M4x8mm), See Inset 2. Inset i Phillips Head Bolt M4x8mm qty: 2 Inset 2 Cabinet Door Stop qty: 1 Attach Firebox to Cabinet [] Place the firebox onto the cabinet frame with regulator hose and side burner ignition wire hanging inside of the cabinet, We recommend using 2 people to lift
Summary of the content on the page No. 13
Install Grease Tray, Grease Cup Bracket and Grease Cup [] Insert the Grease Tray along two sides of the firebox from the back underneath the firebox, See Inset 1 [] Attach the Grease Cup Bracket to the bottom of the Grease Tray using 2 Cotter Pins as shown The Cotter Pins in the bracket are towards the front of the grill See Insets2 and 3 [] Install the Grease Cup into the Grease Cup Bracket, inserting it from the front of the cabinet See Inset 4 I._) __ --_ ° Cotter Pin qty: 2 Inset 1 Inset 2 I
Summary of the content on the page No. 14
install Side Burner Frame to Firebox. [] Unscrew the 2 Phillips Head bolts ¼" from the upper left and right corner holes in the left side of the firebox as shown in Inset 1. The bolts extending out of the firebox sides are to attach the side burner frame. [] Slide the upper holes of the side burner frame over the heads of the 2 Phillips Head Bolts and drop down. [] Use 2 Phillips Head Bolts (M6x16mm) and 2 Lock Washers (M6) to attach the lower holes in the side burner frame to the firebox as sho
Summary of the content on the page No. 15
Attach Side Burner Control Panel to Hain Control Panel [] Use 2 Phillips Head Bolts (M4x8mm) and 2 Lock Washers (M4) to attach the Side Burner Control Panel to the firebox as shown. Phillips Head Bolt M4x8mm Qty: 2 © Lock Washer: M4 Qty:2 Attach Side Burner Control Knob and Side Burner Ignition Wire [] Slide the side burner ignition wire through the hole located in the lower left front corner of the Firebox Assembly and over the side burner igniter connector. See Insets 1 and 2. [] Push the Cont
Summary of the content on the page No. 16
Install [] Unscrew Side Shelf the 2 Phillips Frame Head to Firebox. bolts 1/4"from the upper left and right corner holes in the right side of the firebox as shown in Inset 1. The bolts extending out of the firebox sides are to attach the side shelf frame. [] Slide the upper holes of the side shelf frame over the heads of the 2 Phillips Head Bolts and drop down. [] Use 2 Phillips Head Bolts (M6x16mm) and 2 Washers (M6) to attach the lower holes in the side shelf frame to the firebox as shown in I
Summary of the content on the page No. 17
/_ [] PlaceHook and theSecure ends of LPthe Cylinder Cylinder into Support the Cabinet Ring into the two holes in the left front and rear legs. See Inset 1, [] Place the LP cylinder down into the tank support hole in the bottom of the cabinet. Ensure the valve faces to the front. Wrap the Cylinder Support Ring around the top of the tank and hook to secure the LP cylinder in place, See Inset 2. [] Unscrew the bolt and nut located on the front of the left side cabinet panel. Attach the regulator h
Summary of the content on the page No. 18
_1_ Congratulations - Assembly is now complete! [] Remove any additional labels or packing material from the grill except the CSA label. Be sure to clean all foam packing material out of all areas. [] Please proceed to and read the remaining sections of the Use & Care Guide prior to hooking up your LP cylinder or operating your grill. [] To transport grill, grasp Towel Bar Handle on the end of the side shelf for easier mobility. 0 • 0 0 @ 18
Summary of the content on the page No. 19
CORRECT LP GAS TANK USE • Use of alcohol or drugs may impair the ability to assemble and operate the appliance. • LP gas grill models are designed for use with a • Keep a fire extinguisher readily accessible. In standard 20lb. (9.1kg) Liquid Propane Gas (LP Gas) the event of an oil or grease fire, do not attempt tank, which is not included with the grill. Never to extinguish with water. Use a Type B extinguisher connect your gas grill to an LP gas tank that exceeds or smother with dirt, sand, or
Summary of the content on the page No. 20
Regulator and LP Cylinder Connections Notes about LP Gas Tank Exchange Programs • Many retailers that sell grills offer you the option of replacing your empty LP gas tank through an exchange service. Use only those reputable exchange companies that inspect, precision fill, test and certify their tanks. Exchange your tank only for The gas pressure regulator provided with this an OPD safety feature equipped tank as described outdoor cooking appliance must be used. This in the LP gas tank section o
