Summary of the content on the page No. 1
Gas Barbecues
Assembly and Operating Instructions for
Omega 100, Omega 200, and Omega 300 Gas Barbecues
Omega 100 Omega 200 Omega 300
Photographs are not to scale.
Specifications subj ect to change
without prior notice.
0359
• For outdoor use only.
• Read instructions before using the appliance. Failure to follow instructions could
result in death, serious bodily injury, and/or property loss.
• Warning: accessible parts may be very hot. Keep young children away.
• Do not move t
Summary of the content on the page No. 2
A. Parts List Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see the corresponding Hardware Reference Diagram for your barbecue model. OUTBACK® OMEGA RANGE CODE PART QTY OMEGA 100 OMEGA 200 OMEGA 300 A1 Lava Rock Rack 1 A2 Burner 1 A3 Hood H andl e 1 A4 Hood 1 A5 Body 1 A6 Grease C up H older 1 A7 Grease C up 1 Body A8 Cooking Grill 1 Assembl y A9 Lava Rock
Summary of the content on the page No. 3
B1. Parts Diagram: Omega 100 Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see ‘Hardware Reference Diagram: Omega 100.’ A8 A1 A9 A3 Pre-assembled body unit includes the following individual parts: A2 A4 A5 A10 B1 B2 B3 A11 A12 A13 B5 B6 A14 B6 B4 A6 A7 C1 C5 C8 C6 C9 C7 C4 C3 C2 D7 3
Summary of the content on the page No. 4
B2. Hardware Reference Diagram: Omega 100 Specifications subject to change without prior notice. 4
Summary of the content on the page No. 5
C1. Parts Diagram: Omega 200 Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see ‘Hardware Reference Diagram: Omega 200.’ A8 A1 A9 A3 Pre-assembled body unit includes the following individual parts: A2 A4 A5 A10 B1 B2 B3 A11 A12 A13 B5 B6 A14 B6 A6 B7 A7 C1 C5 C8 C6 C9 C7 C10 C4 C3 C2 D7 5
Summary of the content on the page No. 6
C2. Hardware Reference Diagram: Omega 200 Specifications subject to change without prior notice. 6
Summary of the content on the page No. 7
D1. Parts Diagram: Omega 300 Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see ‘Hardware Reference Diagram: Omega 300.’ A8 A1 A9 A3 Pre-assembled body unit includes the following individual parts: A2 A4 A5 A10 B1 B2 B3 B5 A11 A12 A13 A14 B6 B8 A15 B9 B6 A6 B10 B7 B11 A7 B12 C1 C5 C8 C6 C9 C7 C10 C4 C3 C2 D7 7
Summary of the content on the page No. 8
D2. Hardware Reference Diagram: Omega 300 Specifications subject to change without prior notice. 8
Summary of the content on the page No. 9
E. Assembly TOOLS NEEDED FOR ASSEMBLY: Medium size flat blade or Philips/crosspoint screwdriver, adjustable spanner or metric spanner set. Please lay out all nuts and bolts and check lengths before assembling. Whilst every care is taken in the manufacture of this product, care must be taken during assembly in case sharp edges are present. Omega 100 Omega 200 Omega 300 1 Omega 100 Omega 200 Omega 300 2 C8 C1 Warning: Care must be tak
Summary of the content on the page No. 10
Omega 100 Omega 200 Omega 300 3 C8 C1 *NOTE: Take care to fix the legs with Velcro attached as shown in the illustration. Omega 100 Omega 200 Omega 300 4 D4 D8 D4 D8 D4 D8 D4 D8 10
Summary of the content on the page No. 11
Omega 100 Omega 200 Omega 300 5 D6 C6 D6 Omega 100 Omega 200 Omega 300 6 D4 C9 D4 11
Summary of the content on the page No. 12
Omega 100 Omega 200 Omega 300 7 C3 C4 C2 D7 Omega 100 Omega 200 Omega 300 8 Omega 100 users skip this step and proceed directly to Step 9. C10 12
Summary of the content on the page No. 13
Omega 100 Omega 200 Omega 300 9 Omega 200, Omega 300 users skip this step and proceed directly to Step 10. D3 B4 Omega 100 Omega 200 Omega 300 10 Omega 100 users skip this step and proceed directly to Step 13. Omega 200 users perform this step for both left and right side shelves. D9 D8 B7 D5 13
Summary of the content on the page No. 14
Omega 100 Omega 200 Omega 300 11 Omega 200 users skip this step and proceed directly to Step 13. B10 D9 D8 D5 Connect the side burner electrode wire to the tab on the side of the push button igniter. Fit the side burner venturi tube over the gas valve outlet. This is a loose fit and not a gas tight seal. Then attach side burner shelf as shown in the diagram. Omega 100 Omega 200 Omega 300 12 B9 14
Summary of the content on the page No. 15
Omega 100 Omega 200 Omega 300 13 A6 A7 Feed grease cup holder through rear body hole. Insert grease cup into wire cup holder. Omega 100 Omega 200 Omega 300 14 A1 A9 15
Summary of the content on the page No. 16
Omega 100 Omega 200 Omega 300 15 A8 Omega 100 Omega 200 Omega 300 16 A3 D2 D2 16
Summary of the content on the page No. 17
Omega 100 Omega 200 Omega 300 17 C5 ASSEMBLY IS NOW COMPLETE. PROCEED TO THE NEXT PAGE FOR INSTRUCTIONS ON OPERATION AND MAINTENANCE. 17
Summary of the content on the page No. 18
starts to fall below +10 degrees Celsius. If this F. Important Information happens we recommend propane gas is used. If in doubt, please consult your gas dealer/distributor. The Please read these instructions carefully before gas bottle should never be stood on the trolley base assembly and use. or placed directly under the barbecue. Do not use or store a gas bottle on its side. • Retain these instructions for future reference. • For outdoors use only – do not use indoors. Do Fo
Summary of the content on the page No. 19
applicable) should be open during preheating. H3. Fixing the Regulator to the Gas Bottle Confirm all barbecue control knobs are in the off • After preheating, the burner should normally be position. Connect the regulator to the gas bottle turned down to a lower setting for best cooking according to your regulator and bottle dealer’s results. instructions. I4. Manual Ignition Instructions H4. Leak Testing (To be performed in a well- • Insert lit match through the match-lighting hole
Summary of the content on the page No. 20
result in a fire behind the control panel causing I8. End of Cooking Session After each cooking session, turn the barbecue burner serious damage to your barbecue. If this happens, to the “high” position and burn for 5 minutes. This the gas should be immediately turned off at the procedure will burn off cooking residue, thus making bottle. Burners should be inspected and cleaned on cleaning easier. Make sure the hood is open during a regular basis in addition to the following conditions:
