3Com Kappa Series 60.7cs user manual

Summary of the content on the page No. 1

s
n
o
i
t
c
u
r
t
50.7cs,60.7cs,65.7cs,680.7cs
kappa series
s
n
i

Summary of the content on the page No. 2

INSTALLATIONWARNINGS ANDTIPS INSTALLATION ® THANK YOU for purchasing Infinity’s Kappa REAR DECK PRECAUTION INSTALLATION TIPS Figure 1. Mounting the 50.7cs woofer with Series automotive loudspeaker components. In some cars, fuel tanks may be located directly • Always wear protective eyewear when using the grille. We’ve organized this manual to make their beneath the rear deck. Before installation, make any tools. installation as simple and trouble-free as possible. sure there is adequate speak

Summary of the content on the page No. 3

INSTALLATION INTERMOUNT III MOUNTING RINGS FLUSH-MOUNT TWEETER ANGLE Figure 7A. Behind grille panel. The Kappa 60.7cs is packaged with two different Figure 5A. Mounting the tweeter using the Figure 6. Aim the tweeter at the listening position speaker adaptor rings. The rings will allow the I-Mount™ flush-mounting kit. by sliding the stud in the groove on the back of speakers to be installed into various factory 6," the tweeter cup and rotating the entire assembly 3 6-1/2" and 6-3/4" openings. Th

Summary of the content on the page No. 4

INSTALLATION SPECIFICATIONS 50.7cs 65.7cs MOUNTING THE CROSSOVER TWEETER LEVEL ADJUSTMENT Type: 5-1⁄4" 2-Way Component Type: 165mm 2-Way Component Open the crossover housing by placing your Located on the right side of the crossover network Crossover Frequency: 3.5kHz Crossover Frequency: 3.5kHz fingers between the terminals and the top cover, is a small switch which controls the tweeter level. Woofer Woofer and gently pulling off the cover. Using screws or The upper position is +3dB and the lo