Summary of the content on the page No. 1
PRV-LX1 Quick Start
(Commands using the front panel appear in bold text while Function menu commands appear in bold-italics)
Set Up the PRV-LX1
Connect the PRV-LX1 to a source
device as shown below. For ease of
use, add a monitoring screen to each
device.
The example (right) shows the setup
for Composite Video with RCA Audio.
Select the Recording Inputs & Parameters
To record material from a source device
directly to disc, select a target. Press the
Function button on the PRV-LX
Summary of the content on the page No. 2
Using the arrow buttons on the front panel, highlight A Input then press Enter. Verify that RCA is highlighted then press Enter to select that option. An orange box ( ) appears next to RCA. Note: Settings are automatically saved to the recorder until an option is changed. Arrow left and down to highlight Recording under the Setup menu. Press Enter to access the Recording menu. Arrow right to access the Video/Audio submenu. Using arrow buttons, select the video encode rate
Summary of the content on the page No. 3
Record Your Video Function RECord Once the encode rates are set, record the video to the disc in DVD1. Press the Function button to exit the Function menu. Press the Record button on the front panel or the remote control to capture video from the source device as a recording session. Repeat these button combinations until all required video is captured. Each recording session encodes as a Title. Build A Menu Once the video is recorded to the disc, press the Function button on
Summary of the content on the page No. 4
Select the next action after a Title is played. If a menu is available, you can program playback to return to that menu. The other options are to continue playing through the following Title(s) or to stop playback then wait for another command. Arrow to the Preview button then press Enter to view a menu with your current selections. Each time the menu is changed, activate the Preview button to view the new menu. To return to the Function menu from DVD Menu preview, hit the Fun
Summary of the content on the page No. 5
Finalization times vary depending upon the amount of material being burned to the disc. The drive tray automatically opens when the finalization process is complete. PRV-LX1_QuickStart.doc Page 5 of 5
