Summary of the content on the page No. 1
www.seuservice.com
1st PRINTING NOV 01
OWNER’S MANUAL
SEGA ENTERPRISES, INC. USA
MANUAL NO. 999-1375
Summary of the content on the page No. 2
VISIT OUR WEBSITE!
Summary of the content on the page No. 3
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: To maintain the safety: To ensure the safe usage of the product, be sure to read the following before using the product. The following instructions are intended for the users, operators and the personnel in charge of the operation of the product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the product appropriately. Be sure to keep this manual nearby the product or elsewhere convenient
Summary of the content on the page No. 4
Specification changes (removal of equipment, conversion and addition) not designated by SEGA are not allowed. The parts of the product include warning labels for safety, covers for personal protection, etc. It is very hazardous to operate the product by removing parts and or modifying the circuits. Should doors, lids and protective parts be damaged or lost, refrain from operating the product, and contact where the product was purchased from or the office herein stated. SEGA shall not be held
Summary of the content on the page No. 5
TABLE OF CONTENTS BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: TABLE OF CONTENTS INTRODUCTION OF THE OWNER'S MANUAL 1. HANDLING PRECAUTIONS ......................................................................................1 2. PRECAUTIONS CONCERNING INSTALLATION LOCATION ..............................3 3. OPERATION .................................................................................................................5 4. NAME OF PARTS ...................
Summary of the content on the page No. 6
SPECIFICATIONS Installation space : 56in [1,435 mm] (W) X 123in[3120 mm] (D) Height : 87.4 in. [2,220 mm] Weight : 1,194 lbs. [543 kg.] Power, maximum current : 1,250 W 11.5 A (AC 120V 60 Hz AREA) 1,150 W 6.4 A (AC 220V 50 Hz AREA) 1,240 W 7.0 A (AC 220V 60 Hz AREA) 1,150 W 5.8 A (AC 230V 50 Hz AREA) 1,140 W 5.6 A (AC 240V 50 Hz AREA) For TAIWAN Power, current : 1,250 W 12.5 A (MAX.) 750 W 7.0 A (MIN.) MONITOR : 50 TYPE PROJECTION DISPLAY INTRODUCTION OF THE OWNER'
Summary of the content on the page No. 7
DEFINITION OF LOCATION'S MAINTENANCE MAN AND SERVICEMAN Non-technical personnel who do not have technical knowledge and expertise should refrain from performing such work that this manual requires the location's maintenance man or a serviceman to carry out, or work which is not explained in this manual. Failing to comply with this instruction can cause a severe accident such as electric shock. Ensure that parts replacement, servicing & inspections, and troubleshooting are performed by the locat
Summary of the content on the page No. 8
General Precautions Follow Instructions: All operating and use instructions should be followed. Attachments: Do not use attachments not recommended by the product manufacturer as they may cause hazards. Accessories: Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with t
Summary of the content on the page No. 9
Safety Check: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. Heat: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other prod- ucts (including amplifiers) that produce heat. Lithium Battery- Dispose of batteries only in accordance with the battery manufacturer’s recommendations. Do not dispose in an open flame conditio
Summary of the content on the page No. 10
1. HANDLING PRECAUTIONS When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely. Non-compliance with the following points or inappropriate handling running counter to the cautionary matters herein stated can cause personal injury or damage to the machine. Before performing work, be sure to turn power off. Performing the work without turning power off can cause an electric shock or short circuit.
Summary of the content on the page No. 11
For the IC board circuit inspections, only the logic tester is allowed. The use STOP of a multiple-purpose tester is not permitted, so be careful in this regard. The Projector is employed for this machine. The Projector's screen is IMPORTANT susceptible to damage, therefore, be very careful when cleaning the screen. For details, refer to PROJECTOR. Some parts are the ones designed and manufactured not specifically for this game machine. The manufacturers may discontinue, or change the spe
Summary of the content on the page No. 12
2. PRECAUTIONS CONCERNING INSTALLATION LOCATION This product is an indoor game machine. Do not install it outside. Even indoors, avoid installing in places mentioned below so as not to cause a fire, electric shock, injury and or malfunctioning. Places subject to rain or water leakage, or places subject to high humidity in the proximity of an indoor swimming pool and or shower, etc. Places subject to direct sunlight, or places subject to high temperatures in the proximity of heating units,
Summary of the content on the page No. 13
OPERATION AREA For the operation of this machine, secure a minimum area of 1.6m (W) X 3.1m (D). In order to prevent injury resulting from the falling down accident during game play, be sure to secure the minimum area for operation. Be sure to provide sufficient space so as to allow this product's ventilation fan to function efficiently. To avoid machine malfunctioning and a fire, do not place any obstacles near the ventilation opening. SEGA shall not be held responsible for damage, compe
Summary of the content on the page No. 14
3. OPERATION PRECAUTIONS TO BE HEEDED BEFORE STARTING THE OPERATION To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors and players. In order to avoid accidents, check the following before starting the operation: To ensure maximum safety for the players and the customers, ensure that where the product is operated has sufficient lighting to allow any warnings to be read. Operation under insufficient lighting can cause bodily con
Summary of the content on the page No. 15
Do not put any heavy item on this product. Placing any heavy item on the product can cause a falling down accident or parts damage. Do not climb on the product. Climbing on the product can cause falling down accidents. To check the top portion of the product, use a step. To avoid electric shock, check to see if door & cover parts are damaged or omitted. To avoid electric shock, short circuit and or parts damage, do not put the following items on or in the periphery of the product. Flo
Summary of the content on the page No. 16
PRECAUTIONS TO BE HEEDED DURING OPERATION (PAYING ATTENTION TO CUSTOMERS) To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors and players. To avoid injury and accidents, those who fall under the following categories are not allowed to play the game. • Those who need assistance such as the use of an apparatus when walking. • Those who have high blood pressure or a heart problem. • Those who have experienced muscle convulsion or lo
Summary of the content on the page No. 17
To avoid injury and parts damage, instruct players that only up to two persons are allowed to ride. To avoid injury resulting from falling down, and electric shock due to spilled drinks, instruct the player not to place heavy items or drinks on the product. Do not place drinks on the base! Instruct the player to take a firm grip of the handle Bars during play. This machine reacts as per the contents of the game. To avoid injury, instruct the players to refrain from single-handed taking g
Summary of the content on the page No. 18
Immediately stop such violent acts as hitting and kicking the product. Such violent acts can cause parts damage or falling down, resulting in injury due to fragments and falling down. When riding in tandem, firmly hold on to the front player. To avoid injury, do not stand driving the ride. www.seuservice.com 9
Summary of the content on the page No. 19
BILLBOARD 4. NAME OF PARTS PTV 50 TYPE PROJECTOR FRONT CABINET RIDE FIG. 4 a COMPRESSOR BOX COIN CHUTE DOOR CASHBOX DOOR REAR CABINET ASSY WIRE TUBE AC UNIT FIG. 4 b TABLE 4 Dimensions and Weights Items Width X Depth X Height Weight PTV 44.9in[1,140mm](W) X 9.98in[253.5mm](D) X 65.75in[1,670mm] (H) 242-lbs[110kg] BILLBOARD 45.4in[1,152mm](W) X 17.9in[454mm] (D) X 11.7in[297mm] (H) 33-lbs[15kg] FRONT CABINET
Summary of the content on the page No. 20
5. ACCESSORIES When transporting the machine, make sure that the following parts are supplied. TABLE 5 a ACCESSORIES DESCRIPTION OWNERS MANUAL KEY MASTER 220-5576 (2) Part No. (Qty.) 420-6659-01 (1) Note For opening/closing the doors Figures KEY (2) If Part No. has no description, the Number has not been For the CASHBOX DOOR registered or can not be registered. Such a part may not be The Keys are inside the Coin obtainable even if the customer desires to purchase it. Chute Door at the time of
