Honeywell M6410A user manual

Summary of the content on the page No. 1

M6410A, M7410F Actuators
V5862A,V5863A Valves
HIGH-FORCE NON-SPRING RETURN ACTUATORS
AND 1, 1-1/4, 1-1/2 INCH NPT CARTRIDGE GLOBE VALVES
M6410A and M7410F Series 3000 Non-Spring Return Valve
SPECIFICATION DATA
Actuators provide floating or modulating control of V5862A
and V5863A Series 3000 Cartridge Globe Valves.
FEATURES
The actuators are used in electronic temperature control
systems, which use hot and/or cold water (with glycol up to
• Small size allows installation in limited space.
50

Summary of the content on the page No. 2

M6410A, M7410F ACTUATORS V5862A,V5863A VALVES Stroke: Actuator Required: ❑ 1/4 in. (6.5 mm). ❑ M6410A: Non-Spring Return Valve Actuator (3-position floating). Running Time: ❑ M7410F: 0 to 10 Vdc or 2 to 10 Vdc Electronic Actuator. ❑ At 50 Hz: 150 seconds. ❑ Valve inserts are provided as spare parts. See Table 2. ❑ At 60 Hz: 125 seconds. Leakage Rate: Stem Force: ❑ ≤0.05% of Cv. ❑ 67.5 lb (300 N). Valve Close-off Ratings: Suitable Medium: ❑ See Table 1. ❑ Water with maximum 50% glycol. Approvals

Summary of the content on the page No. 3

M6410A, M7410F ACTUATORS V5862A,V5863A VALVES Dimensions in in. (mm): 2-5/16 (58) MINIMUM CLEARANCE 9-7/8 STROKE 1/4 (6.5) 23/32 (250) G (18) 3-15/16 (100) E A C C D 1/2 (13) F 2-3/8 (61) 1-15/16 B (49) M8225A VALVE SIZE BC D E F G A (NPT) Non-Spring Return Actuators (M6410A, M7410F) 1 (25) 4-1/8 (105) 1-5/8 (41) 2-1/16 (53) 3-5/8 (92) 2 (50) 2-5/16 (58) 1-1/4 (32) 4-15/16 (125) 2 (50) 2-7/16 (62) 3-5/8 (92) 2-3/16 (55) 2-5/16 (58) 1-1/2 (38) 5-1/8 (130) 2-3/16 (55) 2-9/16 (65) 3-7/8 (98) 2

Summary of the content on the page No. 4

M6410A, M7410F ACTUATORS V5862A,V5863A VALVES TYPICAL SPECIFICATION Cartridge Globe Valves Cartridge globe valve supplier must be Honeywell. Valves shall be available in two- and three-way mixing models with brass bodies and stainless steel stem. Valves must have nominal rangeability of 50:1 or better. Valves must have a leakage rating less than 0.05% of the Cv. Valves 1 in. or larger must be pressure balanced. Valves shall be usable with hot water, chilled water, or glycol solutions up to 50 pe