Havis-Shields Trunk Side Mount C-TSM-CHGR-X user manual

Summary of the content on the page No. 1

INSTALL INSTRUCTIONS C-TSM-CHGR-X
TRUNK SIDE MOUNT FOR 2006-2008 DODGE CHARGER
X = “D” DRIVERS SIDE OR “P” PASSENGER SIDE

TOOLS REQUIRED:
Ratcheting wrench Screwdriver set
Utility knife or Jig Saw Powered drill w/ 1/8” & 3/16” drill bits

HARDWARE:
QTY DESCRIPTION PART #
3 10-32 Keps nuts GSM30028
3 10-32 x ½” Phillips machine screws GSM33118
3 #10 x ¾” Sheet metal screws GSM33195

Always!
Read all instructions before installing any Havis-Shields Equipment Corp products.

Summary of the content on the page No. 2

Drill (3) marked holes using Attach using 10-32 x ½” Finished look of Passenger-Side 3/16” drill bit machine screws and keps nuts Mount in police package Finish look of trunk floor after cut is Finished look of Passenger-Side made. (Passenger Side Mount) Mount in standard package version Note: When installing a C-TSM-CHGR-P or D with a full size radio trunk tray, you must relocate the trays’ spring lock on the tray and reposition to the center set of holes. This will allow the Trun