Harbor Freight Tools Pittsburgh Automotive Jack Stands 69596 user manual

Summary of the content on the page No. 1

Summary of the content on the page No. 2

WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate

Summary of the content on the page No. 3

Assembly Instructions Post 1. Raise Handle and hold it up. 2. Turn Post so that the teeth on its side face the Pawl. 2 Insert the Post into the Base. Tab 3 Pawl 3. Bend the tab in to secure the Post into the Jack. Handle Make sure the Post cannot slide out of the Base. 1 Base Operation Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. 1. Check the vehicle’s weight to 8.

Summary of the content on the page No. 4

Specifications Model 69596 69597 Capacity 6 Tons 3 Tons (Evenly distributed (12,000 lb.) (6,000 lb.) across two Stands.) Approximate 15-3/16" – 23-1/2" 11-1/2" – 16-3/8" Height Range Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warr