Summary of the content on the page No. 1
Important Safety Instruction
CAUTION: Use of controls or adjustments or performance of procedures other than those specified
• •
herein may result in hazardous radiation exposure.
Please carefully study this manual and always keep it available. There are, however, some installation and
Widescreen Kichen LCD ATSC/NTSC TV with
operation precautions which you should be aware of .
DVD Player and AM/TM Tuner
(1) Read these instructions-All the safety and operating instructions should be read bef
Summary of the content on the page No. 2
Important Safety Instruction Safety Precautions Continued (13) Unplug this apparatus during lightning storms or when unused for long periods of time. Unplug it from CAUTION the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to • RISK OF ELECTRIC SHOCK DO NOT OPEN lightning and power-line surges. WARNING: SHOCK HAZARD-DO NOT OPEN AVIS: RISOUE DE CHOC ELECTRIQUE-NE PAS OUVRIR (14) Refer all servicing to qualified servic
Summary of the content on the page No. 3
Unpacking Please make sure the following items are included with your DVD player. If any items are Table of Contents missing, contact your dealer. IMPORTANT SAFETY INSTRUCTIONS Page SAFETY INFORMATION TABLE OF CONTENTS UNPACKING..............................................................................................................................................................1 NOTE ON DISC...................................................................................................
Summary of the content on the page No. 4
Note on Disc Disc Requirements • The DVD player can play back the following discs. Disc mark Contents Disc size Maximum playback time 133 min (SS-SL) DVD video Audio+Video 242 min (SS-DL) 12cm discs (moving picture) 266 min (DS-SL) 484 min (DS-DL) Audio CDs Audio 74min 12cm In addition, this unit can play back a CD-R, or CD-RW that contains audio titles or MP3 files.You cannot play discs other than those listed above.(CD-ROM, CD-Extra,
Summary of the content on the page No. 5
• Identification of Controls enti ication o ontro s 1. STOP 14. TUNING+/RIGHT DIRECTION Under the DVD mode, press to stop playback. Under the tuner mode, press briefly to skip Main Unit Under the tuner mode, press to clear the forward. Press and hold the button to search fast incorrect input when programming channels. forward. Connectors on the unit’s rear panel. 2. PREV It also works as the right direction button while Press the button briefly to ski
Summary of the content on the page No. 6
• a e onnections Identification of Controls Cable Connections DISPLAY PROGRAM STANDBY MODE TITLE KEY PAD GOTO AUDIO SUBTITLE PBC SETUP ANGLE TV SETUP EXIT DIRECTION REPEAT /OK/TUN/CH A-B MENU F.FWD MUTE F.BWD NEXT PREV STEP PLAY/PAUSE SLOW STOP VOL+ CLEAR External AV Source VOL- ZOOM/MEMORY Wall Outlet CH-LIST EPG/FM/AM 100-240V~50/60Hz ST/MONO AUTO/FAV NOTE: 1. Be sure to have all necessary connections properly done before connect the power supply. 2. When input
Summary of the content on the page No. 7
> > > > < • Mounting Under-Cabinet Mounting Min. 2.0 mm Max. 25.0 mm Choose an appropriate mounting location underneath a cabinet or shelf. Choose an appropritate mounting location underneath a cabinet or shelf. Close proximity to an electrical outlet, a TV antenna or cable connection and a telephone jack will facilitate a neat, easy installation. Do not mount the product above a range or oven. Be sure that the location chosen will provide adequate access to the electrical connection on the r
Summary of the content on the page No. 8
• Basic Operation Basic Operation TV Operation Time Button 1. Connect the cables. Press POWER to turn on the player. Refer to the “Cable Connections” section for details. Repeatedly press the TIME button on the main unit to display the following information. 2. Press MODE to set the unit into the TV mode. Clock - - > Week - - > Date - - > Alarm - - > Display Off 3. Press CH+/- to skip channels. Press VOL+/- to adjust the volume. Time button functions under any living modes. For the initial
Summary of the content on the page No. 9
• nction B ttons Function Buttons on the Remote isp a isp a Press the Display button to show the time and status information. Repeatedly press the Display button to quit the display mode. a a se DVD Press the Play/Pause button to start/hold playback. top Press STOP once to stop playback by a time point. Press the PLAY button to resume playback from where it was stopped. Press STOP twice to completely stop the disc. Press the PLAY button to
Summary of the content on the page No. 10
• nction B ttons nction B ttons oto oto Go to a desired section. Press GOTO to display the search menu. en Under the DVD mode, press the Menu button to show the root menu. DVD DVD T C --- /001 0:02:03 Off -- /12 it e Under the DVD mode, press the Title button to show the title menu. 1. Press the direction buttons to move left/right. 2. Press the number buttons to input data. irection B tton O To cancel the incorrect input, press the Clear button. 3. Press
Summary of the content on the page No. 11
• nction B ttons et p ST/Mono DVD Setup ST/Mono Switch between the stereo audio mode and the mono audio mode when there is stereo audio Various features of the DVD player can be adjusted in the SETUP menu. signal detected. 1. Press SETUP to show the setup menu. DVD CH-List 2. Press direction buttons to select the options. Press to display the channel list under the CH-List TV mode. 3. Press OK to confirm settings. Language OSD L
Summary of the content on the page No. 12
• et p TV Function TV Function Audio Setup Preparations Item Description Default Setting 1. Connect the antenna and the power supply. Press POWER to turn on the the player. Stereo See “ Cable Connections” section. Channel Output Sets the audio channel mix mode DVD 2. Press MODE to select TV. (LT /RT, Stereo). 3. Press the CH+/- button to skip channels or press numeric buttons to input the channel directly. For the initial use, scan channels under the “Channel Setup” menu. S
Summary of the content on the page No. 13
• DVD TV Function ro e ootin Time Setup Should your DVD player develop a problem, please check below before requesting service: ITEM DESCRIPTION Symptom Check and Action Time Zone Select the time zone. 1. Make sure the unit has been powered on manually. (Central, Mountain, Pacific, Alaska, Hawaii, Atlantic, Eastern). 2. Check if the power cord has been properly connected to the power outlet. No power Daylight Saving Set the time saving function
Summary of the content on the page No. 14
• DVD Specification Specification 1093 Specification 7093 Specification TV system NTSC + ATSC TV system NTSC + ATSC AC input 100-240V 50/60Hz AC input 100-240V 50/60Hz AC/DC Adapter AC/DC Adapter DC output (+12V / 2.0 A) DC output (+12V / 2.0 A) On working 24W (Max) On working 24W (Max) Power consumption Power consumption S
