Summary of the content on the page No. 1
FPE2608
26” HD FLAT PANEL LCD TV
OWNER'S MANUAL
FOR ASSISTANCE CALL CUSTOMER SERVICE AT 1-800-645-4994
OR VISIT US AT WWW. AUDIOVOX.COM 128-8307
PLV36260CS10 / AUDIOVOX
Printed in China
811-362691W080
I/B 811-362691W080
SIZE : 148 X 210MM
MATERIAL : 80g WOODSFREE PAPER
Summary of the content on the page No. 2
SAFETY PRECAUTIONS PLACEMENT INFORMATION • Do not use this unit in places which are extremely hot, cold, dusty or humid. • Do not restrict the air flow of this unit by placing it somewhere with poor air flow, by covering it with a cloth, by placing it on bedding or carpeting. WARNING : TO REDUCE THE RISK OF SAFETY INFORMATION ELECTRIC SHOCK, DO NOT REMOVE COVER • When connecting or disconnecting the AC (OR BACK). NO USERSERVICEABLE PARTS power cord, grip the plug and not the cord itself. INSIDE.
Summary of the content on the page No. 3
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 13)Unplug this apparatus during lightning storms or when unused for long periods 2) Keep these instructions. of time. 3) Heed all warnings. 14)Refer all servicing to qualified service 4) Follow all instructions. personnel. Servicing is required when 5) Do not use this apparatus near water. the apparatus has been damaged in any 6) Clean only with a dry cloth. way, such as the power cord or plug is 7) Do not block any ventilation openings.
Summary of the content on the page No. 4
CONTENTS SAFETY PRECAUTIONS .................................................................................................................... 1 IMPORTANT SAFETY INSTRUCTIONS ........................................................................................... 2 CONTENTS ......................................................................................................................................... 3 ACCESSORIES ....................................................................
Summary of the content on the page No. 5
ACCESSORIES Please check and identify the supplied accessories. Remote Control (with batteries) ................................................................................................. x 1 GETTING STARTED USING THE REMOTE CONTROL • Point the remote control at the remote sensor located on the unit. • When there is a strong ambient light source, the performance of the infrared remote sensor may be degraded, causing unreliable operation. • The recommended effective distance for remote oper
Summary of the content on the page No. 6
CONTROL REFERENCE GUIDE REMOTE CONTROL 5. MENU button Press to display the on-screen TV menu. 6. VOLUME (- / +) buttons Press to adjust the volume level. 7. CURSOR ( , , , ) buttons Press to highlight selections on a menu screen and adjust certain settings. ENTER button Press to confirm selections on a menu screen. 8. CC button Press to activate the Closed Captioning feature. This function only works on programs broadcasted with captions. 9. EXIT button Press to exit the TV SET UP menu and retur
Summary of the content on the page No. 7
CONTROL REFERENCE GUIDE FRONT & SIDE VIEWS 1. STD.BY / ON button 5. - VOL + controls Turns the unit on and off. Adjusts the volume level. 2. MENU button 6. Removable stand Enters the on-screen TV menu. 7. Color LCD screen 3. FUNCTION button 8. Remote sensor Selects TV / AV 1 / AV 2 / YUV in / HDMI 1 / Receives the remote control signal. HDMI 2 / PC in. Standby indicator 4. CH buttons 9. Speaker Confirms selections on the TV menu screen and changes the TV channels. E - 6 FPE2608_ib_eng_1-13.pmd 6
Summary of the content on the page No. 8
CONTROL REFERENCE GUIDE REAR VIEW 12 10 13 11 12 18 14 20 13 21 19 15 22 20 14 16 23 21 15 17 22 24 18 16 19 25 17 23 10. AUDIO IN (Left/Right) jacks (AV IN 2) 18. VIDEO / AUDIO OUT (Left / Right) jacks 11. VIDEO IN jack (AV IN 2) (AV OUT) 12. VIDEO IN jack (AV IN 1) 19. PC IN MONITOR / VGA jack 13. Headphones jack 20. AC Power Cord 14. TV ANTENNA terminal 21. HDMI jacks (HDMI IN 1 / HDMI IN 2) 15. AUDIO IN (Left / Right) jacks (AV IN 1) 22. PC IN AUDIO jack 16. S-VIDEO IN jack (AV IN 1) 23.Comp
Summary of the content on the page No. 9
CONNECTIONS CONNECTING A TV ANTENNA / CABLE / SATELLITE To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - A cable system - A satellite system Connecting a Digital Antenna The tuner in this TV receives ATSC TV signals from an antenna. Satellite, cable or TV This digital TV can receive antenna cable to TV standard (SDTV) and high ANTENNA terminal definition (HDTV) over the air (cable not included) broadcasts.
Summary of the content on the page No. 10
CONNECTIONS CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE) VIDEO OUTPUT To connect A/V devices such as a VCR, video game system or camcorder: Connecting to a VCR / Video Game System / Camcorder Connect the AUDIO / VIDEO cable (not included) as shown: Make sure you connect the cable from the other equipment (AUDIO and VIDEO OUT) to this unit AV IN 1 (AUDIO and VIDEO IN) or AV IN 2 (AUDIO and VIDEO IN). To AUDIO / VIDEO IN jacks (AV IN 1) To AUDIO / VIDEO AV IN 1 OUT jacks OR To AUDIO / VID
Summary of the content on the page No. 11
CONNECTIONS CONNECTING A HIGH-DEFINITION (HD) SOURCE High-Definition (HD) Devices with component video output must be connected to the YUV input. Connect the component video cable and audio cable (not included) as shown. Make sure you connect the component video cable and audio cable from the other equipment (COMPONENT VIDEO OUT and AUDIO OUT) to this unit (COMPONENT VIDEO IN and AUDIO IN - YUV IN). To AUDIO IN jacks (YUV IN) To AUDIO OUT jacks * May require a subscription for receiving HD To ch
Summary of the content on the page No. 12
CONNECTIONS CONNECTING HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes and other digital AV devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by DVI-compliant or HDMI-compliant displays. HDMI has the capabi
Summary of the content on the page No. 13
CONNECTIONS CONNECTING THE AC POWER CORD • Connect the AC power cord into a wall outlet. • Press the STD. BY / ON button on the left side of the unit or use the remote control to turn on the unit. NOTES • TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF WALL OUTLET, THEN FULLY INSERT. • When the AC power cord is plugged in, the unit is not completely disconnected from the main power, even when the power is turned off. • Be sure the AC power cord is disconnected and all functio
Summary of the content on the page No. 14
3 7/8” INSTALLATION REMOVING THE BASE STAND WARNING: The LCD display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp objects, or anything that could scratch or damage the LCD display, come in contact with it. Do NOT place pressure on the rear of the unit at anytime because the screen could crack. 1. Disconnect any cables or cords connected to the unit. 2. Lay the unit down on a flat surface, so the back side is facing up, making sur
Summary of the content on the page No. 15
TV SETUP VIDEO MENU 1. Press the MENU button. 2. Press the ENTER or button to select Video. 3.Use the or button to select the options (Picture Mode, Brightness, Contrast, Saturation, Tint, Sharpness or Color Temperature). Adjust them using the or button (The screen will change to your desired setting); or press the ENTER or button to go into the detailed settings. 4. Press the EXIT button to return to the previous menu. 5. Repeat steps 3 and 4 to adjust other options. 6. To exit the MAIN M
Summary of the content on the page No. 16
TV SETUP AUDIO MENU 1. Press the MENU button. 2. Use the or button to select Audio, then press the ENTER or button to go into the Audio settings. 3. Use the or button to select the options (Balance, Bass, Treble, Virtual Surround, Reverb or Sound mode). Adjust them using the or button (The screen will change to your desired setting); or press the ENTER or button to go into the detailed settings. 4. Press the EXIT button to return to the previous menu. 5. Repeat steps 3 and 4 to adjust ot
Summary of the content on the page No. 17
TV SETUP TV MENU (For TV Mode Only) 1. Press the MENU button. 2. Use the or button to select TV. Press the ENTER or button to go into the TV settings. 3.Use the or button to select the options (Tuner Mode, Auto Scan, Auto Scan Add CH, Channel Skip, MTS or Audio Language). Adjust them using the or button (The screen will change to your desired setting); or press the ENTER or button to go into the detailed settings. 4. Press the EXIT button to return to the previous menu. 5. Repeat steps 3
Summary of the content on the page No. 18
TV SETUP SETUP MENU 1. Press the MENU button. 2. Use the or button to select Setup. Press the ENTER or button to go into the Setup settings. 3.Use the or button to select the options (OSD Language, Time Setup, Caption or Restore setting). Adjust them using the or button (The screen will change to your desired setting); or press the ENTER or button to go into the detailed settings. 4. Press the EXIT button to return to the previous menu. 5. Repeat steps 3 and 4 to adjust other options. 6.
Summary of the content on the page No. 19
TV SETUP Caption Setting Video Analog Closed Caption Off Video Caption Style As Broadcaster Digital Closed Caption Off Font Size Small Audio Audio Digital Caption Style Font Style Style 1 Font Color Green TV TV Font Opacity Solid Setup Setup Background Color Black Background Opacity Translucent Parental Parental Window Color White Window Opacity Transparent Caption ENTER Enter EXIT Return Select Digital Caption Style Select EXIT Return Analog Closed Caption : Select the analog closed caption or
Summary of the content on the page No. 20
TV SETUP Parental Control Setting 1. Use the or button to select various Parental settings. Press the ENTER or button to go into the detailed settings. 2. Use the , , and buttons to move among the rating levels. Press the ENTER button to change the mode between Blocked and Allowed. 3. Press the EXIT button to return to the previous menu. 4. Repeat steps 1 - 3 to adjust other options. 5. To exit the MAIN MENU and return to the normal screen, press the EXIT button repeatedly. Video Program Bloc
