Summary of the content on the page No. 1
FPE1908
19” HD FLAT PANEL LCD TV
OWNER’S MANUAL
FOR ASSISTANCE CALL CUSTOMER SERVICE AT 1-800-645-4994
OR VISIT US AT WWW. AUDIOVOX.COM 128-8060
E - 1
English.indd 1 6/11/2008 12:36:03 PM
Summary of the content on the page No. 2
SAFETY PRECAUTIONS PLACEMENT INFORMATION • Do not use this unit in places that are extremely hot, cold, dusty or humid. • Do not restrict the airflow of this unit by placing it somewhere with poor airflow, by covering it with a cloth, by placing it on bedding or carpeting. SAFETY INFORMATION • When connecting or disconnecting the AC power WARNING : TO REDUCE THE RISK OF ELECTRIC cord, grip the plug and not the cord itself. Pulling SHOCK, DO NOT REMOVE COVER (OR BACK). the cord may damage
Summary of the content on the page No. 3
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience 2) Keep these instructions. receptacles, and the point where they exit 3) Heed all warnings. from the apparatus. 4) Follow all instructions. 1 1) O n l y u s e a t t a c h m e n t s / a c c e s s o r i e s s p e c i fi e d 5) Do not use this apparatus near water. by the manufacturer. 6) Clean only with a dry cloth. 12) Use only wi
Summary of the content on the page No. 4
QUICK INSTALLATION When you turn on your television set for the first 2 3/8" time, be sure to place it on a solid stable surface. To avoid danger, do not expose the TV to water, or a heat source (e.g. lamp, candle, radiator). 2 3/8" Do not obstruct the ventilation grid at the rear and be sure to leave sufficient gaps around the 2 3/8" unit as shown. TURNING ON THE UNIT FOR THE FIRST TIME The first time you turn on the unit, the unit will enter the setup mode. You can easily follow the prom
Summary of the content on the page No. 5
ACCESSORIES Please check and identify the supplied accessories. Remote Control (with batteries) ................................................................................................. x 1 GETTING STARTED USING THE REMOTE CONTROL • Point the remote control at the remote sensor located on the unit. • When there is a strong ambient light source, the performance of the infrared remote sensor may be degraded, causing unreliable operation. • The recommended effective distance for remote ope
Summary of the content on the page No. 6
CONTROL REFERENCE GUIDE REMOTE CONTROL 6. DISPLAY Button 19 Press to show that input you are watching (TV / AV in / YUV in / PC). 1 18 7. VOLUME (- / +) Buttons Press to adjust the volume level. 2 8. FORMAT Button Press to select the picture format (Auto, 3 4:3, Wide, Zoom). 17 9. MTS Button 4 16 Press to select between MONO sound, STEREO sound and Secondary Audio 5 Program (SAP). 6 15 10. CC Button 7 Press to activate the Closed Captioning 8 feature. This function only works on 14 9
Summary of the content on the page No. 7
CONTROL REFERENCE GUIDE FRONT AND SIDE VIEWS 1. Button 7 Press to turn the unit on and off. 1 2. MENU Button Press to enter the on-screen TV menu. 2 3. FUNCTION Button 3 Press to select TV / AV in / YUV in / PC in. 4 8 4. CH / CH Buttons 5 Press to select a TV channel 9 and highlights selections 6 (Up and Down) on the menu screen. 5. - VOL + Buttons Press to adjust the volume level. 6. Remote Sensor Receives the remote control signal. Standby Indicator 7. Color LCD Screen 8. Spe
Summary of the content on the page No. 8
CONNECTIONS CONNECTING A TV ANTENNA / CABLE / SATELLITE To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - A cable system - A satellite system Connecting a Digital Antenna The tuner in this TV receives ATSC TV signals from an antenna. This digital TV can receive standard (SDTV) and high definition (HDTV) over the air broadcasts. Connecting an Analog Satellite, cable or TV Antenna or Device antenna ca
Summary of the content on the page No. 9
CONNECTIONS CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE) VIDEO OUTPUT To connect A/V devices such as a VCR, video game system or camcorder. Connecting to a VCR / Video Game System / Camcorder Connect the AUDIO / VIDEO cable (not included) as shown. Make sure you connect the cable from the other equipment (AUDIO and VIDEO OUT) to this unit (AUDIO and VIDEO IN). To AUDIO / VIDEO IN jacks (AV IN) VCR / VIDEO GAME SY STEM / CAMCORDER, etc. To AUDIO / VIDEO AV IN OUT jacks NOTE Please
Summary of the content on the page No. 10
CONNECTIONS CONNECTING A HIGH-DEFINITION (HD) SOURCE High-Definition (HD) Devices with component video output must be connected to the YUV input. Connect the component video cable and audio cable (not included) as shown. Make sure you connect the component video cable and audio cable from the other equipment (COMPONENT VIDEO OUT and AUDIO OUT) to this unit (COMPONENT VIDEO IN and AUDIO IN - YUV IN). HD SOUR CE With component video output (Digital Cable Box*, Satellite Receiver*, or external To
Summary of the content on the page No. 11
CONNECTIONS CONNECTING AN AUDIO AMPLIFIER This connection allows you to use an audio amplifier and external speakers. Connect the AUDIO cable (not AUDIO AMPLIFIER / included) as shown. EXTERNAL SPEAKERS To AUDIO IN jacks Make sure you connect the cable from the other equipment (AUDIO IN) to this unit (AUDIO To AUDIO OUT). OUT jacks CONNECTING THE AC POWER CORD • Connect the AC power cord into a wall outlet. • Press the STANDBY / ON button on the left side of the unit or use the remote contr
Summary of the content on the page No. 12
3 15/16” INSTALLATION REMOVING THE BASE STAND WARNING: The LCD Display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. Do NOT place pressure on the front of the unit at any time because the screen could crack. 1. Disconnect any cables or cords connected to the unit. 2. Lay the unit down on a flat surface, so the backside is facing up,
Summary of the content on the page No. 13
TV SETUP Note: Some setting items on the menu screen may not activate depending on what mode the unit is currently in (TV/AV in/YUV in/PC in). PICTURE MENU 1. Press the MENU button. PICTURE AUDIO TIME SETUP PARENTAL TV 2. Press the button to enter PICTURE settings. PictureMode Standard 3. Use the or button to select the options (Picture Contrast 63 Mode, Contrast, Brightness, Sharpness, Tint or Brightness 44 Color). Adjust them using the or button (Screen Sharpness 25 Tint 0 will chang
Summary of the content on the page No. 14
TV SETUP TIME MENU 1. Press the MENU button. 2. Use the or button to select TIME, then press the PICTURE AUDIO TIME SETUP PARENTAL TV button to enter the TIME settings. OSDDuration 15 Sec 3. Use the or button to select the options (OSD SleepTimer Off Duration, Sleep Timer, Time Zone or Day Saving Time Zone Eastern DaySavingTime Off Time). Adjust them using the or button. Clock 2007/03/05 04:39PM 4. Repeat step 3 to adjust other options. 5. To exit the MAIN MENU and return to the norma
Summary of the content on the page No. 15
TV SETUP PC Set Up (in PC mode only) - Resolution : 1,440 x 900 max - Refresh Frequency : 60Hz max PICTURE AUDIO TIME SETUP H-Pos 50 H - Pos : Center the image by moving it left or right. V-Pos 50 V - Pos : Center the image by moving it up or down. Clock 50 Clock : Adjusts the display clock to change width of Phase 100 the image. Auto adjust Phase : Adjusts the image if there is flicker of screen letters, color misalignment, or blurring. Best Resolutionis 1440x900 "MENU":EXIT UP/DOWN ADJUST
Summary of the content on the page No. 16
TV SETUP Parental 1. Use the or button to select various Parental settings. Adjust them using the or button, or press the button PICTURE AUDIO TIME SETUP PARENTAL TV to go into the detailed settings. ChangePassword 2. Press the MENU button to return to the previous menu. RatingEnable On 3. Repeat steps 1 - 2 to adjust other options. US Canada 4. To exit the MAIN MENU and return to the normal screen, RRTSetting press the EXIT or MENU button repeatedly. ResetRRT UP/DOWN ADJUST "MENU":E
Summary of the content on the page No. 17
TV SETUP TV MENU (For TV Mode Only) 1. Press the MENU button. 2. Use the or button to select TV, then press the button to enter the TV settings. PICTURE AUDIO TIME SETUP PARENTAL TV Antenna Air 3. Use the or button to select the options (Antenna, Auto Scan Auto Scan, Auto Scan Add CH, Channel Skip, Auto Scan AddCH Channel No. Channel Label or DTV Signal). Adjust Channel Skip them using the or button, or press the button Channel No. 5-5 to go into the detailed settings. Channel Label
Summary of the content on the page No. 18
MAINTENANCE CLEANING THE UNIT • Be sure to turn the unit off and disconnect the AC power cord before cleaning the unit. • Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that has been dipped in a weak soap-and-water solution and wrung out thoroughly. Then wipe it with a dry cloth. • Never use alcohol, benzene, paint-thinner, cleaning fluid or other chemicals. Do NOT use compressed air to remove dust. TROUBLESHOOTING GUIDE SYMPTOM CAUS
Summary of the content on the page No. 19
1 2 ½ 6 5 / 8 8 5 / 8 1 4 7 / 8 1 6 5 / 8 Unit : INCH 1 8 4 11 7 1 0 1 5 / 1 6 E - 19 English.indd 19 6/11/2008 12:36:58 PM
