Summary of the content on the page No. 1
LED LCD TV User Manual
LE42K09D/
LE42H09P
www.aoc.com
2010 AOC. All Rights Reserved.
Summary of the content on the page No. 2
This manual is provided as an operational guide to user. All statements, technical information, and recommendations in this manual and in any guides or related documents are believed reliable, but the accuracy and completeness thereof are not guaranteed or warranted, and they are not intended to be, nor should they be understood to be,representations or warranties concerning the products described. 1
Summary of the content on the page No. 3
Contents Important information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Operating AOC TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Power on/off the TV set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Caution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 First time s
Summary of the content on the page No. 4
Important information Important safety information 1. Read and keep these instructions. Warning 2. Pay attention to all warnings. 3. Follow all operation instructions. CAUTION 4. Make sure that only proper power supply is used RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR This sign is intended to warn the user that uninsulated, dangerous voltage inside the TV 5. Do not install the TV set in high temperatur
Summary of the content on the page No. 5
Accessories Usage Instructions Do not use accessories not recommended by the product manufacturer in order to avoid risks. Installation Wall-mount Placement Wall-mount brackets need to be used for wall-mount TV sets. Be sure to ask qualified contractors to It is recommended to keep a distance 3-7 times more carry out installation when using wall-mount brackets to than the screen height from the TV set when watching install or remove a TV set. Improper installation or remov- TV programs and s
Summary of the content on the page No. 6
Electric shock LED screen Do not touch the AC power cord or the TV set with • Although the LED screen is manufactured by state-of- a wet hand. Plugging in or unplugging the AC power the-art technologies, with effective pixels reaching up cord with a wet hand may result in electric shock. to 99.99% or even higher, black spots or bright spots such as red, blue and green may appear on the LED screen continuously. This is the structure nature of the LED panel rather than a failure. • As the LED sc
Summary of the content on the page No. 7
? Small accessories Cleaning Clean the plug of the AC power supply. Place small accessories out of children’s reach. Pull out the AC power supply plug and clean it regularly. If there is too much dirt on the plug, it will absorb moisture and its insulation property will decline, thus resulting in a fire. Clean the TV set screen/casing • Unplug the AC power cord to avoid electric shock during cleaning. • Clean the TV set with a soft dry cloth gently to Antenna remove dust on the screen. Use a
Summary of the content on the page No. 8
Moving the TV set 30 cm Move the TV set as per the specified below 4 inches Be sure to follow the following instructions to avoid 10 cm 10 cm Install the TV set the TV set from falling and severe personal injury: with a stand base. • Disconnect all cables before moving the TV set. Such a space shall be provided • Moving a large-size TV set needs two or more persons. at least around the TV set. • Hold the position as indicated in the figure below when moving the TV set. Do not press the LED pa
Summary of the content on the page No. 9
Volume adjustment Adjust the TV set volume so as not to affect neighbors as sound seems to be transmitted easily at night. It is recommended to close the window or use a pair of is a trademark of SRS Labs, Inc. TruSurround HD earphones. technology is incorporated under license from SRS Labs, Inc. Adjust the volume to an appropriate level when using earphones to prevent overly loud sounds from impairing SRS TruSurround HD™ creates an immersive, feature-rich your hearing. surround sound ex
Summary of the content on the page No. 10
Packing list Check the TV set and all accessories for their intactness after the packing case is opened. User manual Warranty card Warranty card AOC LED TV Set User manual AV TV YPbPr PC USB Freeze Picture Audio I/II Dispaly Sleep Zoom Menu Source CH VOL Back Remote control Batteries for remote control Power cord 9
Summary of the content on the page No. 11
Control and connection e f g Touch type h i Power Channel Source Menu Volume supply a b c d Item Description Used to connect the YPbPr jack and L/R jack input from other device. The YPbPr will provide a YPbPr input better picture quality than S terminal or composite video. b SPDIF Output a digital audio to the external loudspeaker or other digital audio equipment c Antenna input RF input used to connect the cable or VHF/UHF antenna. Connect video output port of personal computer with an 15 p
Summary of the content on the page No. 12
Remote control Keys Description f Program Press the key to change channels. Press either +/- of +/- keys and hold to switch channels rapidly. a g Mute Press the key to mute or unmute the TV sound. AV TV YPbPr PC USB Press the key to set the time after which TV b should turn off and enter standby state. Auto h Sleep power-off may also be achieved in the OSD Freeze Audio Picture I/II n function option. l o Press o œ pπ keys to select the desired k Sleep Dispaly option or adjust the OSD menu settin
Summary of the content on the page No. 13
Battery installation for the remote control Put two AAA batteries (supplied) into the position indicated in the battery case of the remote control. Installation Refer to the above schematic diagram for important operation instructions. Stand base installation Install the stand base (sold separately) before installing the TV set. Carry out the installation pursuant to the following simple procedures: 42”: 1. Disconnect all cables from the TV set. 2. Place the LCD TV set on a stable table covered
Summary of the content on the page No. 14
Wall-mount • Use wall-mount brackets (sold separately) to install the TV set on the wall. Be sure to remove the stand base of the TV set before installing it. • Do not remove the stand base unless the TV set is mount on the wall. • First remove four M6(42”) screws before installing wall-mounted brackets. • Be sure to keep the screws and the removed stand base properly for future use. Place screws out of children’s reach. • For wall-mount installation, refer to the operation instructions provide
Summary of the content on the page No. 15
Connections to TV Cable system or VHF/UHF antenna system Besides standard de finition analog programs, you may also watch standard de finition or high de finition digital programs (if such programs are available in your region). The TV set can receive cable and VHF/UHF antenna analog signal TV programs. AOC strongly recommend to use 75 Ω coaxial cable connected antenna/cable input to receive optimum picture quality. 300 Ω twin-core cable may be easily affected by RF interference, thus resulting in
Summary of the content on the page No. 16
YPbPr connection YPbPr input AV signal connection AV signal input Computer connection TV set can be used as a computer monitor by connecting TV to computer with a VGA cable. The TV set may also be connected to a computer with HDMI output. Computer signal input • Use the VGA cable and an audio cable with ferrite core to connect the TV set to the computer. • If a PC is connected to the TV set and no computer signal has been input for more than 30 seconds, the TV set will enter the standby mode au
Summary of the content on the page No. 17
Reference sheet of computer input signals Set output signals in the computer according to the table below after connecting the computer to the TV set properly. Definition Horizontal frequency (kHz) Vertical frequency (Hz) 640 x 480 31.469 59.940 800 x 600 37.879 60.317 1024 x 768 48.363 60.004 1360 x 768 47.720 59.799 1280 X 1024 63.981 60.000 1920 X 1080 66.587 59.934 Reference sheet of computer HDMI input signals 1. When using the DVI port: Connect the DVI port of the AV equipment to the back
Summary of the content on the page No. 18
AV system supported by TV: PAL D/K B/G I ; NTSC M/N 。 Standard definition interface You may watch conventional programs by DVD player or VCR player. Connect the equipment to the TV set via AV input at the side of the TV set panel. Operating AOC TV set Power on/off the TV set You may turn on the TV set via the power button on the TV set or the remote control. AV TV PC • • • • • • • • USB YPbPr Picture Freeze Audio I/II Dispaly Sleep Power Channel Volume Source Menu Touch type supply Tips 1. Al
Summary of the content on the page No. 19
Step2 : TV pops-up window shown below prompting to select Menu Language. By default English will be selected as Menu language to continue wizard press OK key or πarrow key on remote control or to select languages other then English pressoœarrow key and press Ok key. To exit from initial setup wizard press Menu key. Step3 : TV pops-up window shown below prompting for Auto scan of channel. If RF input is connected to TV select [Scan] and press OK
Summary of the content on the page No. 20
Switch between input sources You can select signal sources to your AOC TV set directly with your remote controller. You can also press the Source key in the display menu to select signal source. 1. When selecting a source with a remote control directly: Press the following keys to switch input sources directly. AV HDMI/ PC TV YPbPr USB Freeze Picture Audio I/II Sleep Dispaly 2. When selecting a source with the source key: Source List TV YPbPr signal Source VOL CH AV terminal PC HDMI 1 HDMI 2 HD
