Summary of the content on the page No. 1
MODELS
MODELS
// E3D320VX
E422VLE
// E3D420VX
// E3D470VX
E472VLE
E552VLE
USER
GUIDE
INSTALLING YOUR NEW TV
CONTROLS & CONNECTIONS
CONNECTING YOUR DEVICES
USING THE ON-SCREEN MENU
USING THE USB MEDIA PLAYER
USING VIZIO INTERNET APPS
TROUBLESHOOTING & SUPPORT
HELP, SPECS, WARRANTY & LEGAL
Summary of the content on the page No. 2
This product qualifies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating. SRS TruSurround HD and SRS TruVolume are Manufactured under license from Dolby HDMI, the HDMI logo and High-Definition trademarks of SRS Labs, Inc. TruSurround Laboratories. Dolb
Summary of the content on the page No. 3
Welcome THANK YOU FOR CHOOSING VIZIO IMPORTANT SAFETY INSTRUCTIONS And congratulations on your new VIZIO HDTV. Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent To get the most out of your new VIZIO product, read these your TV from being damaged, the following instructions should instructions before using your product and retain them for future be observed for the installation, use, and maintenance of your
Summary of the content on the page No. 4
with the apparatus. When a cart is used, use • Do not apply pressure or throw objects at your TV. caution when moving the cart/apparatus This may compromise the integrity of the display. The combination to avoid injury from tip-over. manufacturer’s warranty does not cover user abuse or improper installations. • Unplug this apparatus during lightning storms or when unused for long periods of time. • The power cord must be replaced when using different voltage than the voltage speci
Summary of the content on the page No. 5
Opening or removing the back cover may expose you to • If any of the following occurs, contact the dealer: high voltages, electric shock, and other hazards. If repair - The power cord fails or frays. is required, contact your dealer and refer all servicing to - Liquid sprays or any object drops into your TV. qualified service personnel. - Your TV is exposed to rain or other moisture. - Your TV is dropped or damaged in any way. • WARNING: Keep your TV
Summary of the content on the page No. 6
DTV TRANSITION ADVISORY The nationwide switch to digital television broadcasting was complete on June 12, 2009. Analog-only television sets that receive TV programming through an antenna now need a converter box to continue to receive over-the-air TV. Watch your local stations to find out when they will turn off their analog signal and switch to digital-only broadcasting. Analog-only TVs should continue to work as before to receive low power, Class A or translator television stations an
Summary of the content on the page No. 7
Lightning Protection TELEVISION ANTENNA CONNECTION PROTECTION For added protection of the TV during a lightning storm or when If an outside antenna/satellite dish or cable system is to be it is left unattended or unused for long periods of time, unplug connected to the TV, make sure that the antenna or cable system the TV from the wall outlet and disconnect the antenna or cable is electrically grounded to provide some protection against system. voltage surges and static charges. Power Li
Summary of the content on the page No. 8
Table of Contents Adjusting the Picture Settings ............................................18 Installing the TV ................................................ 3 Adjusting the Advanced Picture Settings ........................19 Inspecting the Package Contents .....................................3 Adjusting the Color Temperature ....................................20 Installing the TV ...................................................................3 Adjusting the Picture Size and Position
Summary of the content on the page No. 9
Adjusting the CEC Settings ..............................................33 Turning the VIZIO Logo On or Off .....................................33 Using the Help Menu ..........................................................34 Displaying System Information ........................................34 Resetting the TV Settings ..................................................34 Restoring the TV to Factory Default Settings ....................35 Using Guided Setup .............................
Summary of the content on the page No. 10
Installing the TV INSPECTING THE PACKAGE CONTENTS INSTALLING THE TV Before installing your new TV, take a moment to inspect the After removing the TV from the box and inspecting the package package contents. Use the images below to ensure nothing is contents you can begin installing the TV. Your TV can be installed missing or damaged. in two ways: • On a flat surface, using the included stand • On a wall, using a VESA-standard wall mount (not included) Installing the TV Stand Your TV includ
Summary of the content on the page No. 11
1 Installing the TV on a Wall To mount your TV on a wall, you will need a wall mount. Consult the information below to find the appropriate mount for your TV model: Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you. E422VLE E472VLE E552VLE Screw Size: M6 M6 M8 Screw Length: 20mm 16mm 25mm Screw Pitch: 1.0mm 1.0mm 1.25mm 200mm (V) x 200mm (V) x 200mm (V) x Hole Pattern: 200mm (H) 400mm (H) 400mm (H) Be sure the mount you choose is capab
Summary of the content on the page No. 12
Controls and Connections 2 REAR PANEL Ethernet - Connect ethernet cable from home network. Coaxial - Connect coaxial cable from cable, satellite, or antenna. Optical Audio Out - Connect optical/SPDIF audio device, such as home audio receiver. Stereo Audio Out - Connect 3.5mm audio device, such as sound bar. HDMI - Connect HDMI device. PC Audio In - Connect 3.5mm audio cable from PC RGB - Connect PC Component/Compsite - Connect component or composite device. Rear Panel 5
Summary of the content on the page No. 13
2 SIDE PANEL POWER - Turn TV off or on. MENU - Open the on-screen menu. CHANNEL UP/DOWN - Change the channel. VOLUME UP/DOWN - Increase or decrease volume level INPUT - Change input source. USB - Connect USB thumb drive for photo or music playback. HDMI Side - Connect HDMI device. Side Panel 6
Summary of the content on the page No. 14
2 FRONT PANEL REMOTE SENSOR When using the remote, aim it directly at this sensor. Front Panel 7
Summary of the content on the page No. 15
2 REMOTE CONTROL APP LAUNCHER Quickly launch the pictured app. INPUT POWER Change the currently-displayed input. Turn TV on or off. A/V CONTROLS INFO Control USB media player. Display the info window. CLOSED CAPTIONS MENU Open the closed caption menu. Display the on-screen menu. EXIT ARROW Close the on-screen menu. Navigate the on-screen menu. OK GUIDE Select the highlighted menu option. Display the info window. BACK V BUTTON Go to the previous on-screen menu. Open the VIA dock. V
Summary of the content on the page No. 16
2 Replacing the Batteries 1. Remove the battery cover. 2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover. • Use only good quality batteries. • Inserting the batteries incorrectly may result in cracking or leakage that may cause a fire or result in injury. • Dispose of old or dead batteries in accordance with local hazardous waste regulations.
Summary of the content on the page No. 17
Connecting Your Devices 3 CONNECTING A DEVICE Your TV can be used to display output from most devices. 1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc). Cable/Satellite Box 2. Turn the TV and your device off. 3. Connect the appropriate cable (not included) to the TV and the device. 4. Turn the TV and your device on. Set the TV’s input to match DVD/Blu-ray Player Game Console the connection you used (HDMI-1, HDM1-2, etc). • DIGITAL H
Summary of the content on the page No. 18
3 CONNECTING A PC Your TV can be used to display output from a personal computer. To use your TV as a PC display: 1. Connect an RGB cable (not included) to your PC and the RGB port on the back of the TV. This cable transmits video. 2. Connect a 3.5mm cable (not included) to your PC and the PC Audio In port on the back of the TV. This cable transmits audio. 3. Set your PC’s resolution to match the resolution of your TV. Personal Computer See Appendix B - Specifications. 3.5mm Cable (For Aud
Summary of the content on the page No. 19
3 CONNECTING AN AUDIO DEVICE Your TV can output sound to an audio device, such as a receiver or sound bar. 1. Verify that your device has a video port that matches an Home Audio Receiver available port on the TV (Optical, 3.5mm, etc). 2. Turn the TV and your audio device off. 3. Connect the appropriate cable (not included) to the TV and the device. 4. Turn the TV and your device on. VIZIO Sound Bar BETTER Optical/SPDIF Cable GOOD 3.5mm Cable CONNECTING AUDIO DEVICE 12
Summary of the content on the page No. 20
3 CONNECTING TO YOUR NETWORK Your TV is internet-ready. It can be connected to your home Connecting to a Wireless Network network with a Wired or Wireless connection. 1. Ensure you have a router or modem broadcasting as high-speed wireless signal (802.11n recommended). Connecting to a Wired Network (Best) 2. Use the Guided Network Setup to configure the TV. See Using 1. Connect an ethernet cable to your router and to the Guided Setup on page 35. ethernet port on the back of the TV. See below.
