Summary of the content on the page No. 1
VIZIO
user manual
Model: E241i-A1 & E291i-A1
Summary of the content on the page No. 2
This product qualifies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating. SRS StudioSound HD and SRS TruVolume Manufactured under license from Dolby HDMI, the HDMI logo and High-Definition are trademarks of SRS Labs, Inc. Laboratories. Dolby and the do
Summary of the content on the page No. 3
Welcome Thank You for Choosing ViZio iMPorT anT safeTY insTruCTions And congratulations on your new VIZIO HDTV. Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent To get the most out of your new VIZIO product, read these your TV from being damaged, the following instructions should instructions before using your product and retain them for future be observed for the installation, use, and maintenance of you
Summary of the content on the page No. 4
source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer • Use only with the cart, stand, tripod, bracket, or local power company. or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use • Do not apply pressure or throw objects at your TV. caution when moving the cart/apparatus This may compromise the integrity of the display. The combination to avoid injury from tip-over. manufacturer’s w
Summary of the content on the page No. 5
be used for long period of time. This will protect your TV polarities may cause the batteries to leak which can from damage due to power surges. damage the remote control or injure the operator. Do not expose batteries to excessive heat such as sunshine, fire • Do not attempt to repair or service your TV yourself. or the like. Opening or removing the back cover may expose you to high voltages, electric shock, and other hazards. If repair • If any of the following occurs, contact the deal
Summary of the content on the page No. 6
lightning Protection TeleVision anTenna ConneCTion For added protection of the TV during a lightning storm or when Pro TeCTion it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable If an outside antenna/satellite dish or cable system is to be system. connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against Power lines voltage surges and static cha
Summary of the content on the page No. 7
Table of Contents Activating the Sleep Timer ..................................................21 Installing the TV ................................................ 3 Setting the Auto Power Off Feature ..................................21 Inspecting the Package Contents .....................................3 Adjusting the Picture Settings ............................................22 Installing the TV ...................................................................3 Adjusting the Advanced Pi
Summary of the content on the page No. 8
Changing the On-Screen Menu Language ....................37 Limited Warranty ............................................... 54 Setting the Time Zone ......................................................37 Legal & Compliance ........................................ 55 Adjusting the CEC Settings ..............................................38 Turning the Power Indicator Light On or Off ....................38 Using the Help Menu ..........................................................39 Disp
Summary of the content on the page No. 9
Installing the TV 1 InspecTIng The p ackage conTenTs InsT allIng The TV Before installing your new TV, take a moment to inspect the After removing the TV from the box and inspecting the package package contents. Use the images below to ensure nothing is contents you can begin installing the TV. Your TV can be installed missing or damaged. in two ways: • On a flat surface, using the included stand • On a wall, using a VESA-standard wall mount (not included) Installing the TV stand Your TV incl
Summary of the content on the page No. 10
1 To install the base: 1. Place the TV screen-down on a clean, flat surface. To prevent 2. Insert and tighten the two(2) included Phillips screws into scratches or damage to the screen, place the TV on a soft the base with a Phillips screwdriver. (Not included) surface, such as a blanket. Gently push the base into the slots as shown. 4
Summary of the content on the page No. 11
1 Installing the TV on a Wall To mount your TV on a wall, you will need a wall mount. Consult the information below to find the appropriate mount for your TV model: Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you. e241i-a1 e291i-a1 Screw Size: M4 M4 Screw Pitch: 0.70mm 0.70mm Screw Length: 10mm 12mm Hole Pattern: 100mm (V) x 100mm (H) 100mm (V) x 100mm (H) Be sure the mount you choose is capable of supporting the weight of the TV. Af
Summary of the content on the page No. 12
Controls and Connections 2 HDMI - Connect HDMI device. Optical Audio Out - Connect optical/SPDIF audio device, such as home audio receiver. Ethernet - Connect ethernet cable from home network. RGB - Connect VGA cable from PC. PC Audio In - Connect 3.5mm audio cable from PC. Coaxial - Connect coaxial cable from cable, satellite, or antenna. USB - Connect USB thumb drive to play photo, music, or video. Stereo Audio Out - Connect 3.5mm audio device, such as sound bar. Component/Compsite - Conn
Summary of the content on the page No. 13
2 POWER - Turn TV off or on. InPUT - Change input source. INPUT MEnU - Open the on-screen menu. MENU CH CHAnnEl UP/DOWn - Change the channel. CH VOL VOlUME UP/DOWn - Increase or decrease volume level. VOL SIDE PAnEl 7
Summary of the content on the page No. 14
2 Front Panel REMOTE SEnSOR & POWER InDICATOR When using the remote, aim it directly at this sensor. FROnT PAnEl 8
Summary of the content on the page No. 15
2 remote Control aPP launCher Quickly launch the pictured app. InPut Power Change the currently-displayed input. Turn TV on or off. /V Contr a ols InFo Control USB media player. Display the info window. Closed CP a tIons menu Open the closed caption menu. Display the on-screen menu. exIt w oarr Close the on-screen menu. Navigate the on-screen menu. ko GuIde Select the highlighted menu option. Display the info window. BC a k V Bonutt Go to the previous on-screen menu. Open the VIA d
Summary of the content on the page No. 16
2 Replacing the Batteries 1. Remove the battery cover. 2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover. 10
Summary of the content on the page No. 17
Connecting Your Devices 3 ConneCting A DeviCe Your TV can be used to display output from most devices. 1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc). Cable/Satellite Box 2. Turn the TV and your device off. 3. Connect the appropriate cable (not included) to the TV and the device. 4. Turn the TV and your device on. Set the TV’s input to match DVD/Blu-ray Player Game Console the connection you used (HDMI-1, HDMI-2, etc). • DIGITAL H
Summary of the content on the page No. 18
3 CONNECTING A DEVICE - AUDIO AND VIDEO CABLE TYPES Av CABLe CMP o onent CABLe HDM C i ABLe AV cables (or Composite cables) are the Component cables are designed to carry high HDMI is the intelligent, all-digital interface traditional way of connecting your devices to definition video signals along with additional that delivers both dazzling quality and your TV. Video signals are sent over the yellow audio connections. Colors are delivered with unmatched ease of use. HDMI technology connector
Summary of the content on the page No. 19
3 ConneCting An AuDio DeviCe Your TV can output sound to an audio device, such as a receiver or sound bar. 1. Verify that your device has a video port that matches an Home Audio Receiver available port on the TV (Optical, 3.5mm, etc). 2. Turn the TV and your audio device off. 3. Connect the appropriate cable (not included) to the TV and the device. 4. Turn the TV and your device on. VIZIO Sound Bar HDMI CABLE • CFC 2-WAY COMMUNICATION • 2.0-5.1 DIGITAL AUDIO • PCM, DTS, DOLBY DIGITAL BEST
Summary of the content on the page No. 20
3 CONNECTING AN AUDIO DEVICE - AUDIO CABLE TYPES 3.5mm CABLe oPtiCAL/SPDiF CABLe HDMi CABLe AV cables (or Composite cables) are the Optical/SPDIF cables transmit audio signals as HDMI technology transmits crystal-clear digital traditional way of connecting your devices to pulses of light through a cable made of plastic multi-channel surround audio through a single your audio device. Audio signals are sent over fibers. Audio signals are digitally transmitted HDMI cable. Audio Return Channel-ena
