Summary of the content on the page No. 1
™
EDGE LIT RAZOR LED LCD HDTV
E320VT / E370VT / E420VT – user manual
Summary of the content on the page No. 2
® This product qualifies for ENERGY STAR in the “factory HDMI, the HDMI logo and High-Definition Multimedia SRS TruSurround HD and SRS TruVolume are trademarks default” setting and this is the setting in which power of SRS Labs, Inc. TruSurround HD and TruVolume Interface are trademarks or registered trademarks of HDMI savings will be achieved. Changing the factory default Licensing LLC. technologies are incorporated under license from SRS picture settings or enabling other features will
Summary of the content on the page No. 3
Welcome Thank You for Choosing VIZIO My Product Information And congratulations on your new VIZIO HDTV. To get the most out of your new VIZIO product, read these instructions before using your product and retain them for future reference. Be sure to inspect the package contents to ensure there are no missing or damaged parts. Product Registration To purchase or inquire about accessories and installation services for your VIZIO product, visit our website at www.VIZIO.com or call toll free at
Summary of the content on the page No. 4
E320VT / E370VT / E420VT objects have fallen into the apparatus, the apparatus has been exposed Important Safety Instructions to rain or moistur e, does not operate normally or has been dr opped. Your DTV is designed and manufactured to operate within defined design • Unplug the power cor d befor e cleaning your TV . limits. Misuse may result in electric shock or fire. To prevent your TV from being • When moving your TV fr om an ar ea of low temperatur e to an ar ea of damag
Summary of the content on the page No. 5
E320VT / E370VT / E420VT to constitute a risk of electric shock to persons. • Insert batteries in accor dance with instructions. Incorr ect polarities may cause the batteries to leak which can damage the r emote contr ol or • Do not overload power strips and extension cor ds. Overloading can injur e the operator . Do not expose batteries to excessive heat such as r esult in fir e or electric shock. sunshine, fir e or the like. • The wall socket should be installed near your TV and ea
Summary of the content on the page No. 6
E320VT / E370VT / E420VT Television Antenna Connection Protection DTV Transition Advisory If an outside antenna/satellite dish or cable system is to be connected to the TV, The nationwide switch to digital television broadcasting was complete on June make sure that the antenna or cable system is electrically grounded to provide 12, 2009. Analog-only television sets that receive TV programming through an some protection against voltage surges and static charges. antenna now need a converter b
Summary of the content on the page No. 7
Table of Contents Adjusting the Time for Daylight Savings .............................................. 15 Installing the TV .......................................................................1 Enabling or Disabling Automatic Date and Time Updates................... 15 Inspecting the Package Contents ........................................................... 1 Setting the Date and Time ................................................................... 16 Installing the TV ..............
Summary of the content on the page No. 8
E320VT / E370VT / E420VT Changing the Parental Control Passcode ............................................ 28 Legal & Compliance .................................................................36 Resetting the Content Locks ............................................................... 28 FCC Class B Radio Interference Statement ........................................ 36 Viewing System Info and Resetting to Factory Defaults ......................... 28 Notice .............................
Summary of the content on the page No. 9
Installing the TV 1 Inspecting the Package Contents Installing the TV Before installing your new TV, take a moment to inspect the package contents. After removing the TV from the box and inspecting the package contents you can Use the images below to ensure nothing is missing or damaged. begin installing the TV. Your TV can be installed in two ways: When you have completed your inspection, install the TV. • On a flat surface, using the included stand • On a wall, using a VESA-standar d wall m
Summary of the content on the page No. 10
E320VT / E370VT / E420VT 1 Installing the TV on a Wall 3. Using a phillips-head screwdriver, attach the base to the TV by inserting To mount your TV on a wall, you will need a wall mount. Consult the information and tightening the 4 included screws. below to find the appropriate mount for your TV model: E320VT E370VT E420VT Screw Size: M6 M6 M6 Screw Length: 20mm 20mm 20mm Screw Pitch: 1mm 1mm 1mm Hole Pattern: 100mm x 100mm 200mm x 200mm 400mm x 400mm Do not insert or tighten these
Summary of the content on the page No. 11
Controls and Connections 2 Rear Panel Component 1/ Connect component or composite video/audio de- Composite: vice. When using composite, use only yellow, white, and red ports. Please note that your rear panel will vary depending on your TV model number. Match your model number to the illustration below RGB PC/ Connect RGB cable from computer, or use RGB-to- for the correct port illustration. Component 2: component adapter to connect component video device. DTV/TV: Connect RF/Coaxial connecto
Summary of the content on the page No. 12
E320VT / E370VT / E420VT 2 Front Panel Right Side Panel Power Menu Remote Control Sensor Channel Up Front Panel Channel Down Remote Control Sensor: When using the remote, point it directly at this sensor. Volume Up Volume Down Input Right Side Panel Power: Turn the TV on or off. Menu: Display on-screen menu. Channel Up/Down: Change the channel. Volume Up/Down: Increase or decrease the loudness of the TVs audio. Input: Change the input device. With each press of the button, the TV will displa
Summary of the content on the page No. 13
E320VT / E370VT / E420VT 2 Remote Control Power/Standby: Turn the TV on or off. Input: Change the input device. With each press of the button, the TV will display a different input. A/V Controls: Control USB photo slideshow. Info: Display the Info Window. Input Power/Standby CC: Open the Closed Captioning menu. A/V Controls Menu: Display the on-screen menu. Info Exit: Close the on-screen menu. CC Arrow: Navigate the on-screen menu and episode guide. Exit Menu OK: Select highlighted menu option.
Summary of the content on the page No. 14
E320VT / E370VT / E420VT 2 Replacing the Batteries 1. Remove the battery cover. 2. Insert two AAA batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover. • Use only good quality batteries. • Inserting the batteries incorrectly may result in cracking or leakage that may cause a fire or result in injury. • Dispose of old or dead batteries in accordance with loc
Summary of the content on the page No. 15
Connecting Your Devices 3 Your HDTV can be easily connected to an external device: Connecting Your Devices • DVD or Blu-Ray player Once you have determined the best available connection type on both your • Video game console device and the TV, ensure you have the corresponding cable. • Cable box To connect a device to the TV: • Exter nal antenna 1. Ensure both the TV and your device are off. • Or other device 2. Connect the device and the TV. Use the best available connection. See the Bef
Summary of the content on the page No. 16
E320VT / E370VT / E420VT 3 Select one of the connection types. Use the cable(s) shown to connect the TV to your device. Select One: HDMI DIGITAL BEST OR RF/ DIGITAL / COAXIAL ANALOG OR RGB ANALOG BETTER OR COMPONENT ANALOG OR COMPOSITE ANALOG AV GOOD Device Connection Chart 8
Summary of the content on the page No. 17
Completing the First-Time Setup 4 The first time you turn on the TV, the Setup App will guide you through each of 4. If the TV is connected to an external Initial Setup Tuner the steps necessary to get your TV ready for use. antenna, select Antenna, then press Please select your input source: Antenna Cable Right Arrow and go to step 5. Before you begin the first-time setup: If the TV is connected to a cable • Y our TV should be installed and the power cor d should be connected service wi
Summary of the content on the page No. 18
Adjusting the TV Settings 5 From the TV Settings Menu, you can: Setting Up Channels • Setup channels From the channel menu you can: • Change the input sour ce • Change the signal sour ce • Change the on-scr een menu • Customize the master channel list language • Scan for new/additional channels • Change the TV’ s date and time • Start a new channel scan • Adjust the TV settings for use as a PC monitor • Customize channel names • Enable or disable the CEC settings Changing the Signa
Summary of the content on the page No. 19
E320VT / E370VT / E420VT 5 Customizing and Removing Input Names Changing the Input Source When you have multiple devices connected to your TV, it can become difficult to External devices such as DVD players, Blu-Ray Players, and video game consoles remember the inputs to which they are connected. Your TV features the ability to can be connected to your TV. To use one of these devices with your TV, you must customize the names of these inputs to make them easy to remember. (Custom first change
Summary of the content on the page No. 20
E320VT / E370VT / E420VT 5 Removing Unused Inputs from the Input List Customizing the Master Channel List If you are not using an input and would like to remove it from the input list, you can By customizing the master channel list, you can choose which channels can be do this from the Input menu. displayed. Channels not in the list will not be available when watching broadcast television. To remove unused inputs: 1. Press the MENU button on the remote. 1. Press the MENU button on the remote.
