Summary of the content on the page No. 1
®
ViewSonic
N3251w
LCD TV
- User Guide
- Guide de l’utilisateur
- Guía del usuario
®
ViewSonic
Model No. : VS11335-1M
Summary of the content on the page No. 2
Contents Compliance Information ................................................................................. 1 Important Safety Instructions .......................................................................... 2 Copyright Information ...................................................................................... 3 Product Registration ........................................................................................ 3 Antenna Installation Instructions ...................
Summary of the content on the page No. 3
Compliance Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guaran
Summary of the content on the page No. 4
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the LCD TV” in this guide for further instructions. 7. Do not block any
Summary of the content on the page No. 5
Copyright Information ® Copyright © ViewSonic Corporation, 2006. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improveme
Summary of the content on the page No. 6
Antenna Installation Instructions 1. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges, Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding
Summary of the content on the page No. 7
Getting Started ® Congratulations on your purchase of a ViewSonic LCD TV. Important! Save the original box and all packing material for future shipping needs. Package Contents Your LCD TV package includes: • LCD TV • 44-Key Remote Control with batteries • Power Cord • RCA Cable • VGA Cable • ViewSonic User Guide • Quick Start Guide ViewSonic N3251w 5 ENGLISH
Summary of the content on the page No. 8
Front View of the Product 1 2 3 4 5 6 7 8 1 Volume Down Decrease sound volume or adjust a highlighted control while in OSD menu. 2 Volume Up Increase sound volume or adjust a highlighted control while in OSD menu. 3 Menu Turn OSD menu ON/OFF. CH Down 4 Channel down when source is at TV/DTV or select a control while in OSD menu. 5 CH Up Channel up when source is at TV/DTV or select a control while in OSD menu. 6 ENTER To highlight a control in OSD menu. 7 Power ON/OFF button 8 Power LED Indicator
Summary of the content on the page No. 9
Rear View of the Product A B C D E F G I H A Analog TV input Connect to NTSC TV source. Digital TV input B Connect to ATSC TV source. C S-Video input Connect this port to the S-Video output of A/V device. AV/ S-Video signal Audio input (left/right) D Connect this port to the RCA audio output connectors of your A/V device. E YPbPr signal Audio input (left/right) Connect this port to the RCA audio output connectors of your A/V device. F YPbPr signal input Connect this port to the YPbPr output of A
Summary of the content on the page No. 10
Remote Control ViewSonic N3251w 8 ENGLISH
Summary of the content on the page No. 11
Remote control button function as follow 1 POWER Power ON/OFF MTS Select Mono, Stereo or SAP in TV / Select audio language 2 in DTV INFO Display current information 3 4 SLEEP Set TV Sleep timer 5 SOUND Select sound modes 6 0~9, 100/- number button Directly channel select 7 VOL+ and VOL- Adjust volume UP/DOWN GUIDE Show electronic program guide (EPG) 8 FAV.A/D To skip or restore Favorite Channels 9 UP/ DOWN /LEFT/ RIGHT/ UP/ DOWN/ LEFT/ RIGHT: Navigate and adjust OSD 10 ENTER function ENTER: En
Summary of the content on the page No. 12
Installation 1. Insert Remote Control Batteries 1 Remove the battery cover by pulling then lifting the knob on the cover. 2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3 Reattach the battery cover. CAUTION • Only use the specified AAA batteries. • Do not mix new and old batteries. This may result in cracking or leakage, which may pose a risk of fire or lead to personal injury. • Insert batteries according to (+) and (-) markings. Inserting the batte
Summary of the content on the page No. 13
2) DTV: Connect the LCD TV to the cable with DTV signals and preset DTV channels into memory with AUTO SCAN function in DTV menu (see page 21). Antenna (not supplied) 3. Connecting to DVD / Set Top Box Connect Video/ Audio cables from compatible devices into the back panel of LCD TV. 1) With AV cable: RCA A/V Cable VCR or DVD Player 2) With S-Video cable: S-Video Cable (not supplied) Audio in Cable (not supplied) VCR or DVD Player ViewSonic
Summary of the content on the page No. 14
3) With YPbPr cable: YPbPr Cable (not supplied) Audio in Cable (not supplied) VCR or DVD Player 4) With HDMI cable: VCR or DVD Player (DVD Player should have the HDMI output terminal) HDMI Cable (not supplied) 4. Connecting to External Stereo System to Listen to LCD TV Sound Connect the audio output terminal of the LCD TV to audio in terminal of the stereo system (stereo system sold separately). Audio in Cable (not supplied) Stereo system ViewSonic
Summary of the content on the page No. 15
5. Connecting to the Headphone Connect the headphone to the headphone output terminal of the LCD TV. (Headphone sold separately). Headphone (not supplied) 6. Connecting to a Computer Connect the VGA cable from VGA output of computer to the VGA terminal input of your LCD TV. PC VGA 15 Pin Cable 7. PC Audio In Connect the Audio cable (green) from audio output of your computer to the audio input terminal (green) of the LCD TV. PC PC Audio Connection (not supplie
Summary of the content on the page No. 16
8. Connecting to A/V Device with SPDIF input Connect SPDIF optical cable from A/V device into the SPDIF output connector of LCD TV. Audio Cable (not supplied) A/V Device SPDIF Optical Cable Stereo System 9. Connecting with the power cord Connect the power cord to the AC inlet on the back of your LCD TV, after all connections have been completed, and plug the other end of the power cord into a correctly grounded electrical outlet. AC wall socket ViewSonic
Summary of the content on the page No. 17
Basic Operation To operate your LCD TV, you may use the TV remote control or top panel buttons to select input source, change channels, or adjust volume. Turning the LCD TV Before using the LCD TV: 1. Connect external equipment properly. 2. Insert the power plug, and the power LED indicator will light red. Power On/Off To turn the LCD TV on/off: Press the POWER button under the LCD TV, or press the POWER button on your remote control to turn on/off the TV. The power LED indicator lights green
Summary of the content on the page No. 18
DTV Guide To see the electronic program guide of the channel, press the GUIDE button on your remote control. It will display the background information related to the channel program. Picture Press the PICTURE button on the remote control to switch between the Smart Picture modes of User, Cinema, Sport, Vivid, and Hi-Bright. Sound Press the SOUND button on the remote control to switch between the Smart Sound modes of User, Rock, POP, Live, Dance, Techno, Classic, and Soft. Channel Select Pres
Summary of the content on the page No. 19
Zoom Press ZOOM button repeatedly to select the screen size. You can select from 1/8, 1/4, 1/2, 1, x2, x4, and x8. Favorite Channel You can press FAV.CH button to watch your favorite channels. Use FAV.A/D button to add the current channel to your favorite channels, or to delete it from your favorite channels. You can add up to 10 favorite channels. Freeze Picture Press FREEZE button to freeze picture. However, the sound still continues. Using the OSD function You can use the OSD menus and opti
Summary of the content on the page No. 20
OSD Functions ADVANCED OPERATION — OSD MENU Video Menu — Adjusting the picture quality Video Menu is active in all but the VGA input source. Contrast: To adjust contrast of video. (right: Max, left: Min). • Brightness: To adjust luminance of video. (right: Max, left: Min). • Color: To adjust color. (right: brilliant color, left: pale color). • Tint: To adjust tint level. (right: greenish tone, left: reddish tone). • Sharpness: To adjust picture sharpness. (right: sharper, left: softer).
