Summary of the content on the page No. 1
Summary of the content on the page No. 2
Content Safety Precautions...................................................................................................5 Package Contents ....................................................................................................6 Optional accessories................................................................................................................ 6 Parts Name and Functions......................................................................................7 Front V
Summary of the content on the page No. 3
ViewSonic CD4225 1
Summary of the content on the page No. 4
ViewSonic CD4225 2
Summary of the content on the page No. 5
ViewSonic CD4225 3
Summary of the content on the page No. 6
ViewSonic CD4225 4
Summary of the content on the page No. 7
Safety Precautions FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONITOR: • DO NOT REMOVE MONITOR BACK COVER. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabinet slots, as they may touch dange
Summary of the content on the page No. 8
Package Contents Your new CD4225 monitor box should contain the following: LCD monitor Quick Start Guide Power cord for North America VGA cable CD Wizard Wireless Remote Control AAA battery (x 2) Optional accessories Stand (STND-013) Speaker Monitor stand (x 2) M4 screw for stand External speaker M3 screw for speaker installation (x 8) installation (x 2) (x 6) ViewSonic CD4225 6
Summary of the content on the page No. 9
Parts Name and Functions Front View 1 1 Remote control sensor/Ambient light sensor/Power LED indicator • Receives the signal from the wireless remote control. • Automatically detects ambient lighting condition and adjusts screen brightness. • Indicates the power status of the monitor. Status Color Power ON Green Power OFF Red Power Standby Orange Failure detected Flashing red Control Panel 1 2 3 4 5 6 ViewSonic CD4225 7
Summary of the content on the page No. 10
1 Carrying handles - Use these handles to move the LCD monitor while installing. 2 Power button ( ) - Turns the LCD monitor’s power on or put it to standby. This button does not isolate the LCD monitor from AC power input. To completely cut off the AC power supply, use the main power switch on the terminal panel. 3 Exit button - Acts as the EXIT button to move to previous menu with OSD menu. 4 PLUS (+) button - Acts as the (+) button to increase the adjustment with OSD menu. Increase the
Summary of the content on the page No. 11
3 AUDIO-IN R/L To input audio signals from external equipment such as a VCR or DVD player. 4 HDMI To input digital RGB signals from a computer. * This connector does not support analog input. Audio is supported via HDMI. 5 DVI-IN To input digital RGB signals from a computer. *This connector does not support audio input. The audio signal should be connected to the LINE-IN jack. 6 DVI-OUT To output digital RGB signals from DVI-IN to another monitor. 7 VGA IN (mini D-Sub 15 pin) To input anal
Summary of the content on the page No. 12
Remote Control 1 MUTE button To switch the mute function on/off. 2 1 2 Power button Switches the power on/off. *If the Power indicator on the monitor is not glowing, then no controls will work. 3 3 Number buttons These buttons are not used and do not work. 4 UP button 4 5 Acts as button to move the highlighted area up to 6 select the adjustment with OSD menu. 7 8 5 INPUT button 9 Selects from input signal: [VGA], [DVI], [HDMI] and [YPbPr]. 10 11 12 13 6 EXIT button 15 14 Turns to previo
Summary of the content on the page No. 13
Installing the Remote Control Batteries The remote control is powered by 1.5V AAA batteries. To install or replace batteries: 1. Press and slide to open the cover. 2. Align the batteries according to the (+) and (-) indications inside the case. 3. Replace the cover. CAUTION: Incorrect use of batteries can result in leaks or bursting. Be careful especially about the following points. • Place “AAA” batteries matching the + and - signs on each battery to the + and - signs of the battery compartme
Summary of the content on the page No. 14
Setup Procedure 1. Determine the installation location CAUTION: DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY YOURSELF. Installation of your LCD monitor must be done by a qualified technician. Contact your dealer for more information. CAUTION: MOVING OR INSTALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE. Failure to follow this caution may result in injury if the LCD monitor falls. CAUTION: Do not mount or operate the monitor upside down, face up, or face down. CAUTION: Do not install
Summary of the content on the page No. 15
• Placing the monitor in portrait position will shorten the average life of the LCD backlight. • Operational Environment (Temperature) shall be limited, as shown below: Operational Temperature 5 - 35 C / 41 - 95 F Environment Humidity 20 - 80% (without condensation) Please orientate the monitor in the direction shown below: Do not place monitor in landscape in any other manner. How to set-up 1. Remove the stands (legs) if attached. 2. The ViewSonic logo should be on the LEFT side when facing the
Summary of the content on the page No. 16
How to Mount and Attach Options to the LCD Monitor Lay the protective sheet on a table, which was wrapped around the monitor when it was packaged, beneath the screen surface so as not to scratch the screen face. 400mm 200mm 200mm This device cannot be used or installed without the Tabletop Stand or other mounting accessory. Failure to follow correct mounting procedures could result in damage to the equipment or injury to the user or installer. Product warranty does not cover damage caused by
Summary of the content on the page No. 17
Ventilation Requirements for enclosure mounting To allow heat to disperse, leave space between surrounding objects as shown in the diagram below. 100mm 100mm 100mm 100mm To avoid monitor from falling Take measures to prevent the monitor from falling over in case of an earthquake or other disaster to lessen the probability of injury and damage resulting from fall. As shown in the figure, secure the monitor to a solid wall or pillar using rope (commercially available) strong enough to bear the w
Summary of the content on the page No. 18
Connections Before making connections: • First turn off the power of all the attached equipment and make connections. • Refer to the user manual included with each separate piece of equipment. Wiring Diagram LCD monitor (second monitor) DVD HD PC or equipment with digital interface VCR * Cables are not supplied ViewSonic CD4225 16
Summary of the content on the page No. 19
Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer's screen image. Some video cards may not display an image correctly. Connect the LCD Monitor to a Personal Computer • To connect the VGA IN connector (mini D-sub 15 pin) on the LCD monitor, use a PC - Video RGB signal cable (mini D-sub 15 pin to mini D-sub 15 pin). • When connecting one or more LCD monitors, use the VGA OUT connector (mini D-sub 15 pin). • The LINE-IN jack can b
Summary of the content on the page No. 20
Connecting with Digital Interface Equipment Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard. Connect the LCD Monitor to a Computer with a Digital Output • The HDMI connector accepts a HDMI cable or a DVI-D to HDMI cable. • The HDMI connector can connect to HDMI output or DVI-D output of PC. • To maintain display quality, use a cable with a quality prescribed by HDMI and DVI standards. • The LINE-IN jack
