Summary of the content on the page No. 1
C3000P Euro OM Cov 26/1/07 4:32 pm Page 1
TOSHIBA
C3000
X3000
Series
Summary of the content on the page No. 2
C3000P Eng OM 26/1/07 4:50 pm Page 34
Summary of the content on the page No. 3
English C3000P Eng OM 26/1/07 4:48 pm Page 3 Contents SETTING UP Safety precautions – Some do’s and don’ts for you to be aware of 4 Installation and important information 5 The remote control – an at-a-glance guide 6 Connecting external equipment – a guide to connecting external equipment to the back of the television 7 Connecting a computer – connecting a computer to the back of the television 8 Controls and input connections – switching on the television, standby, using the controls, head
Summary of the content on the page No. 4
C3000P Eng OM 26/1/07 4:48 pm Page 4 Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased. DO NOT REMOVE ANY FIXED COVERS AS THI
Summary of the content on the page No. 5
English C3000P Eng OM 26/1/07 4:48 pm Page 5 Installation and important information Where to install Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight Sturdy tie (as short as possible) falling on the screen. Place on a sturdy platform, the mounting surface should be flat and steady. It must be secured to the wall with a Clip sturdy tie using the clip on the back o
Summary of the content on the page No. 6
C3000P Eng OM 26/1/07 4:48 pm Page 6 The remote control UP Simple at-a-glance reference of your remote control. To select mode For On/Standby mode Number buttons To select input from external sources To return to the previous programme Active for Toshiba ancillary equipment To change programme positions and To alter the volume text pages To mute the sound On-screen Menus To exit Menus When using menus the arrows move the cursor on the screen up, down, left or right. OK to confirm your select
Summary of the content on the page No. 7
English The cable holder can be used for aerial, media recorder and audio cables. Do not use as a handle and remove all cables before moving the television. C3000P Eng OM 26/1/07 4:48 pm Page 7 Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. COMPONENT VIDEO (EXT3) SCART 2 (EXT2) SCART 1 (EXT1) CABLE HOLDER FIXING STRAP MEDIA REC. decoder* TV HDMI™ INPUT SOCKETS media r
Summary of the content on the page No. 8
C3000P Eng OM 26/1/07 4:48 pm Page 8 Connecting a computer Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. the back of your television Audio cable for PC to television connection (not supplied) Computer Mini D-sub 15 pin connector RGB PC cable (not supplied) Conversion adaptor if required (not supplied) Connect the PC cable from the computer to the PC The following signals can be displayed: terminal
Summary of the content on the page No. 9
English Input 3 (side) will take priority over EXT3 (back) if both connections are used at the same time. C3000P Eng OM 26/1/07 4:48 pm Page 9 Controls and input connections A wide variety of external equipment can be connected to the input sockets on the side of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions. RED LED – Standby Standby GREEN LED – Power on
Summary of the content on the page No. 10
C3000P Eng OM 26/1/07 4:48 pm Page 10 Tuning the television using Quick Setup, sorting programme positions Before switching on the television put your decoder and media recorder to Standby if they are connected. To set up the television use the buttons on the remote control as detailed on page 6. Connect the television to the mains power and With the list of stations now showing use f or e 5 1 to highlight the station you want to move and press the button. The Quick Setup screen will i app
Summary of the content on the page No. 11
English Different Channel numbers may be displayed C3000P Eng OM 26/1/07 4:48 pm Page 11 Manual tune The television can be tuned-in manually using Manual tuning. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System. Use z and x to move across the screen and select any of these Manual Tune options. Programme Programme System Colour Channel Search Manual fine Station system skip tuning Programme: The number t
Summary of the content on the page No. 12
C3000P Eng OM 26/1/07 4:48 pm Page 12 Manual tune continued, Programme skip When your media recorder signal is found, press 8 Programme skip x to move along to Station. With f, e, z and put in the required characters, x e.g. VCR. To prevent certain programmes from being viewed, the programme position can be skipped. The remote control must be removed as the channels will still be available using Manual tuning the number buttons. Programmes can then be watched as Station normal using the con
Summary of the content on the page No. 13
English C3000P Eng OM 26/1/07 4:48 pm Page 13 Auto tune, general controls, sound controls To revert to the previous programme position press . ^^ Using Auto tuning To display on-screen information i.e. programme position, input mode or stereo/mono signal, press + . Press i To set up the television using Auto tuning, press 1 again to cancel. MENU and use or to select the SET UP z x menu. Sound controls Volume SET UP 1/2 Press j — or j + to adjust the volume. Langua
Summary of the content on the page No. 14
C3000P Eng OM 26/1/07 4:48 pm Page 14 Sound controls continued, SRS WOW™ sound ® effects, dual, stable sound WOW Bass boost SRS 3D On FOCUS Off Bass boost enhances the depth of the sound on the TV TruBass Off speakers. The difference will only be noticeable on sound with a strong bass. MENU Back EXIT Watch TV In the SOUND menu press e to highlight Bass 1 boost. Use or to select On. z x Press e to highlight SRS 3D and using 3 or select between On or Off. z x Then press e to highlight Bass bo
Summary of the content on the page No. 15
English C3000P Eng OM 26/1/07 4:48 pm Page 15 Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Press the button repeatedly to select between PC, Exact scan, Wide, Super Live 2, Cinema 2, 4:3, { Super Live 1, Cinema 1, Subtitle and 14:9. SUPER LIVE 1 This setting will enlarge a 4:3 image to fit the screen by stretching the image horizontally and vertically, holding better proportions at the centre of the image. Some dist
Summary of the content on the page No. 16
C3000P Eng OM 26/1/07 4:48 pm Page 16 Widescreen viewing continued Use this setting when watching a 14:9 14:9 broadcast. Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of WIDE widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen. Use this setting to view a true 4:3 4:3 broadcast. FULL HD MODELS Use this setting when watching a 1080 source, it will display the i
Summary of the content on the page No. 17
English C3000P Eng OM 26/1/07 4:48 pm Page 17 Picture controls Picture position Backlight The picture position may be adjusted to suit personal Adjusting the Backlight can improve the clarity of the preference and can be particularly useful for screen when viewing. external inputs. In the PICTURE menu press e to select 1 In the SET UP menu press e until Picture settings, then press OK. 1 Picture position is highlighted. PICTURE SET UP 1/2 Picture settings OK Language E
Summary of the content on the page No. 18
C3000P Eng OM 26/1/07 4:48 pm Page 18 Picture controls continued Picture preferences MPEG NR – Noise Reduction When watching a DVD the compression may cause some This television offers the choice of personalising the picture words or picture elements to become distorted or pixelated. style. Press m to view the different styles available: Using the MPEG NR feature reduces this effect by Picture mode-1 to 3 are preset options and effect many smoothing out the edges. features/settings within t
Summary of the content on the page No. 19
English C3000P Eng OM 26/1/07 4:48 pm Page 19 Picture controls continued Base colour adjustment 3D Colour management Hue Saturation Brightness Red +2 +6 +4 Green 0 0 0 When 3D Colour management is selected it allows the ‘Base colour adjustment’ feature to become available. Blue 0 0 0 Yellow 0 0 0 In the PICTURE menu press e to select Magenta 0 0 0 1 3D Colour management. Cyan 0 0 0 Reset OK MENU Back EXIT Watch TV PICTURE To return to the original factory settings select Picture settings
Summary of the content on the page No. 20
C3000P Eng OM 26/1/07 4:48 pm Page 20 Picture controls continued Automatic format (Widescreen) Blue screen When this television receives a true Widescreen picture and When Blue screen is selected the screen will turn blue and Auto format is On, it will automatically be displayed in the sound will be muted when no signal is received. Widescreen format, irrespective of the television’s previous setting. In the FUNCTION menu press e to highlight 1 Blue screen. Press MENU and z or x to select th
