Summary of the content on the page No. 1
Owner’s Manual
Integrated High Definition
LCD Television
HIGH-DEFINITION TELEVISION
32E200U
32E20U
37E200U
37E20U
40E200U
40E20U
Owner’s Record
The model number and serial number are on the back
For an overview of steps for setting up your new TV, see page 10.
of your TV. Record these numbers in the spaces below.
Note: To display a High Definition picture, the TV must be receiving
Refer to these numbers whenever you communicate
a High Definition signal (such as an over-the-air High Definition
Summary of the content on the page No. 2
Dear Customer, Thank you for purchasing this Toshiba LCD TV. This CHILD SAFETY: manual will help you use the many exciting features It Makes A Difference How and Where You Use Your Flat of your new LCD TV. Before operating your LCD TV, Panel Display please read this manual completely, and keep it nearby for future reference. Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE The Iss
Summary of the content on the page No. 3
any broken glass or liquid from the damaged Important Safety Instructions television. The LCD panel inside the TV contains glass and a toxic liquid. If the liquid comes in 1) Read these instructions. contact with your mouth or eyes, or your skin 2) Keep these instructions. is cut by broken glass, rinse the affected area 3) Heed all warnings. thoroughly with water and consult your doctor. 4) Follow all instructions. ALWAYS contact a service technician to inspect the • 5) Do not use th
Summary of the content on the page No. 4
24) To avoid damage to this product, never place or store 33) DANGER: RISK OF SERIOUS the TV in direct sunlight; hot, humid areas; or areas PERSONAL INJURY OR DEATH! subject to excessive dust or vibration. Use extreme care to make sure you are never in • 25) Always place the TV on the floor or a sturdy, level, a position where your body (or any item you are stable surface that can support the weight of the unit. in contact with, such as a ladder or screwdriver) To secure the TV, use a
Summary of the content on the page No. 5
40) During normal use, the TV may make occasional Choosing a location for your LCD TV snapping or popping sounds. This is normal, especially when the unit is being turned on or off. If To Display your LCD TV on the included these sounds become frequent or continuous, unplug Pedestal Stand: the power cord and contact a Toshiba Authorized Service Center. Observe the following safety precautions: 1) Read and Follow the pedestal assembly instructions 41) DANGER: RISK OF SERIOUS included wit
Summary of the content on the page No. 6
40” TV Removing the Pedestal Stand VESA Mounting Pattern 1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface. Note: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel. 2) Remove the four screws shown in the right diagram. This will allow removal of the pedestal stand. 3) Once you have removed all four screws, holding the pedesta
Summary of the content on the page No. 7
FCC Declaration of Conformity Important notes about your Compliance Statement (Part 15): LCD TV The Toshiba 32E200U, 32E20U, 37E200U, 37E20U, The following symptoms are technical limitations of LCD Display technology and are not an 40E200U, and 40E20U Televisions comply with Part indication of malfunction; therefore, Toshiba is 15 of the FCC rules. not responsible for perceived issues resulting from Operation is subject to the following two conditions: these symptoms. (1) this device may
Summary of the content on the page No. 8
Contents Adjusting the audio ....................................................................38 Important Safety Instructions ............................... 3 Muting the sound ....................................................................38 Installation, Care, and Service ............................. 3 Using the digital audio selector ..............................................38 Chapter 1: Introduction ...................................... 9 Selecting stereo/SAP broadcasts .....
Summary of the content on the page No. 9
Chapter 1: Introduction Features of your new TV The following are just a few of the many exciting features of your new Toshiba widescreen, integrated HD, LCD TV: Integrated digital tuning (8VSB ATSC and • QAM) eliminates the need for a separate digital converter set-top box (in most cases). 1080p output resolution. • ® Four HDMI digital, high-definition multimedia • interfaces 1080p input support ( page 16). HDMI new capability • INSTAPORT™ technology reduces lag time when switching
Summary of the content on the page No. 10
Chapter 1: Introduction 10 Program channels into the TV’s channel memory Overview of steps for installing, ( page 25). setting up, and using your new TV 11 For details on using the TV’s features, see Chapters 6 and 7. Follow these steps to set up your TV and begin using 12 For help, refer to the Troubleshooting Guide, its many exciting features. Chapter 8. 13 For technical specifications and warranty Carefully read the important safety, installation, 1 information, see Chapter 9. care,
Summary of the content on the page No. 11
Chapter 1: Introduction TV front and side panel controls and connections Model 32E200U is used in this manual for illustration purposes. Left side panel TV front 3 TV top 7 4 8 5 9 6 10 11 2 1 12 Control panel 1無 Green LED and TOSHIBA Logo LED 7無 CHANNEL pq — When no menu is on-screen, Power LED(Green) = Power indicator these buttons change the channel (programmed TOSHIBA Logo LED= On or Off ( page 24). channels only; page 25). 2無 Remote sensor — Point the remote control 8無 VOLUME tu — Th
Summary of the content on the page No. 12
Chapter 1: Introduction TV back panel connections For an explanation of cable types and connections, see pages 13–19. 1 TV back 2 3 Power Cord 4 7 6 5 — For use when connecting a personal — Standard (composite) video and 1無 PC IN 6無 VIDEO-1 IN computer. standard audio inputs plus for connecting devices with composite video. ® — High-Definition Multimedia 2無 HDMI IN Note: Standard (composite) video cable Interface input receives digital audio and carry only video information; separate un
Summary of the content on the page No. 13
Chapter 2: Connecting your TV Optical audio cable Overview of cable types Cables can be purchased from most stores that sell audio/ Optical audio cable is for connecting receivers with video devices. Before purchasing any cables, be sure of Dolby Digital or PCM (pulse-code modulation) optical connector types required by your devices and the length audio input to the TV’s DIGITAL AUDIO OUT terminal of each cable. ( page 18). Coaxial (F-type) cable Analog RGB (15-pin) computer cable Coaxial
Summary of the content on the page No. 14
Chapter 2: Connecting your TV Connecting a VCR and antenna, Cable TV or Camcorder From Cable TV or From Cable TV Camcorder antenna Cable box IN CH 3 AUDIO VIDEO CH 4 OUT OUT TV back panel L R Stereo VCR VIDEO AUDIO L R IN from IN CH 3 ANT CH 4 OUT OUT to R TV L VIDEO 2 inputs on TV right side panel You will need: To view the VCR: Turn ON the VCR. Select the VIDEO 1 video input coaxial cables • source on the TV.* standard A/V cables • If you have a mono VCR, connect L/MONO − To view the
Summary of the content on the page No. 15
Chapter 2: Connecting your TV ® Connecting a DVD player with ColorStream (component video), a VCR, and a satellite receiver From antenna TV back panel Stereo VCR VIDEO AUDIO L R IN IN from ANT CH 3 CH 4 OUT OUT to TV L R From satellite dish AUDIO OUT L Y PB PR COMPONENT VIDEO VIDEO R Satellite S-VIDEO OUT IN OUT Satellite receiver with component video or DVD player with component video You will need: To view antenna or Cable channels: coaxial cables Select the ANT/CABLE video input source on
Summary of the content on the page No. 16
Chapter 2: Connecting your TV To connect a DVI device, you will need: ® Connecting an HDMI or DVI one HDMI-to-DVI adapter cable (HDMI type A • device to the HDMI input connector) per DVI device For proper operation, the length of an HDMI- − The HDMI input on your TV receives digital audio to-DVI adapter cable should not exceed 9.8 ft and uncompressed digital video from an HDMI (3m). The recommended length is 6.6 ft (2m). source device, or uncompressed digital video from a one pair of sta
Summary of the content on the page No. 17
Chapter 2: Connecting your TV ® REGZA-LINK connection You can control the basic functions of connected audio/video devices using the TV’s remote control if you connect a REGZA-LINK compatible audio receiver or playback device. For an explanation of setup and operations, see page 49. TV back panel Playback device Audio receiver (REGZA-LINK DVD player,etc.) Playback device (REGZA-LINK DVD player,etc.) To connect an Audio Receiver and Playback Before controlling the device(s): Devices, you will n
Summary of the content on the page No. 18
Chapter 2: Connecting your TV Note: Connecting a digital audio system Some audio systems may not be compatible • with Dolby Digital bitstream signals. Older The TV’s DIGITAL AUDIO OUT terminal outputs a ® audio systems that are not compatible with *Dolby Digital or 2-channel down-mixed PCM standard optical out signals may not work (pulse-code modulation) signal for use with an properly, creating a high noise level that ® external Dolby Digital decoder or other external may damage spea
Summary of the content on the page No. 19
Chapter 2: Connecting your TV Note: Note: The PC audio input terminals on the TV are shared The edges of the images may be hidden. • • with the HDMI-1 analog audio input terminals ( If receiving a 480i (HDMI), 480p (HDMI), 720p, • page 44). 1080i, or 1080p signal program, Native mode Some PC models cannot be connected to this TV. scales the video to display the entire picture within • the borders of the screen (i.e. no overscanning). An adapter is not needed for computers with a • com
Summary of the content on the page No. 20
Chapter 3: Using the remote control Installing the remote control Remote control effective range batteries For optimum performance, aim the remote control directly at the TV and make sure there is no Remove the battery cover from the back of 1無 obstruction between the remote control and the TV. the remote control. Squeeze tab Point remote control toward and lift cover. remote sensor on front of TV. Install two “AAA” size batteries, making 2無 sure to match the + and – signs on the batter
