Summary of the content on the page No. 1
All-Weather Outdoor LCD Television
Operator’s Manual
Model 3260HD
Revision 3260HD -318C-120801
PN: M32-004-01-C
Summary of the content on the page No. 2
Important Safety Instructions Dear SunBriteTV Customer: Congratulations on the ownership of Model 3260HD all-weather outdoor LCD TV, and welcome to the family of satisfied SunBrite customers. You are in great company with thousands of homeowners and esteemed commercial facilities such as Yankee Stadium, Fenway Park, Disney World, and Sea World who have trusted us to deliver superior performance, lasting durability and the enjoyment of superb television viewing in the great outdoors. With a t
Summary of the content on the page No. 3
Important Safety Instructions Cleaning Instructions: See “Care of SunBriteTV” on page 31. Attachments: Do not use attachments not specifically recommended by the manufacturer. Use of improper attachments can result in accidents. Power Source: SunBriteTV must operate on a power source indicated on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company. When using the TV outdoors, you must use a GFI- protected AC ou
Summary of the content on the page No. 4
Important Safety Instructions Ventilation: Adequate ventilation must be maintained to ensure reliable and continued operation and to protect the television from overheating. Do not block ventilation slots and openings with objects, or install the television in a place where ventilation may be hindered. There must be at least 1.5” of space on all sides. Power cord protection: The power cord must be routed properly to prevent people from stepping on it, or objects from resting on it. Check th
Summary of the content on the page No. 5
Table of Contents Important Safety Instructions 2 Table of Contents 5 Supplied Accessories 6 TV Installation Choose a Location for the TV 7 Rear Panel Internal Connect Source 8 Rear Panel Connection Diagrams 9 IR Emitter Installation 17 Side Panel and Front Panel Controls 18 Remote Control Guide 19 On-Screen Display Controls 20 Adjusting On-Screen Displays Picture Menu 21 Sound Menu 22 Setting Menu 23 Channel Menu 28 Trouble Shooting 30 Care of SunBriteTV 31 Specifications 32 Features I
Summary of the content on the page No. 6
Supplied Accessories Unpacking After unpacking the SunBriteTV television, please make sure that the following items are included in the carton and that they are in good condition. If items are damaged or missing, contact your dealer immediately. SunBriteTV LCD Television Model 3260HD Dust Cover Remote Control with Batteries Operator’s Manual Outdoor Dust Cover Model 3260HD Operator’s Manual Page 6
Summary of the content on the page No. 7
TV Installation - Choose a Location for the TV Choose a l ocation for the TV Important: The TV must be installed at least 5 feet from pool, spa, or other body of water. The TV should be installed so the screen is not facing direct sunlight, or can be easily turned away from direct sunlight. Ideal placement is in an area where the TV is shaded by trees, landscape and/or structures, or under a patio cover or gazebo. If the sun shines directly on the screen for long periods of time, dark ar
Summary of the content on the page No. 8
TV Installation – Rear Panel Internal Connect Source WARNING: Do not connect the power source before making connections. Internal Connect Source The Internal Connect Source allows you to easily connect to the Audio, Video, S-Video, SVGA, HDMI, Audio Out, and RF connectors. The Internal Connect Source is inside the Cable Cover located on the back of the unit (Figure1). 1. Unscrew the two gray Thumb Screws (Figure1), and pull the cover towards you. 2. Route the cables to the proper inputs, and pl
Summary of the content on the page No. 9
TV Installation – Rear Panel Connections Connections 3 1 3 4 5 6 7 9 10 11 13 2 8 10 12 1. RS232 - For remote control using RS232 commands 2. IR WINDOW - For remote control using IR commands. 3. SERVICE PORT - These ports are for factory service only...DO NOT USE 4. HDMI 1 - Connects to devices that use HDMI cables such as Blu-ray or HD DVD player or HD cable / satellite set-top box. This connection port receives pure digital audio and high definition signal through one single cable. T
Summary of the content on the page No. 10
TV Installation – Rear Panel Connections Cable Descriptions: Connection Descriptions: Red Green Blue Yellow Green Red White Page 10
Summary of the content on the page No. 11
TV Installation – Rear Panel Connections Switching Sources for Ports: Model 3260HD offers several options when connecting your devices to the TV. The chart below will help you understand which source you switch to for each of the ports. CONNECTINg TO AN ANTENNA Connecting to Digital Cable without Cable Box or Antenna Connecting to Cable or Antenna 1. Make sure the power to the TV is turned off. 1. Make sure the power of the TV is turned off. 2. Connect the Coaxial RF cable from your 2
Summary of the content on the page No. 12
TV Installation – Rear Panel Connection Diagrams CONNECTINg TO AN ANTENNA--(Continued) Connecting to Cable or Antenna through VCR Please Note : 1. Some VCRs must be turned On before its output will have a signal to the TV. Please consult your VCR manual for further reference. 1. Make sure the power of the TV is turned off. 2. Make sure there is an antenna or cable 2. Not all broadcasts are in High Definition (HD). Please refer to connection to the VCR already. your local broadca
Summary of the content on the page No. 13
TV Installation – Rear Panel Connection Diagrams CONNECTINg TO A DVD Pl AYER (Continued) Connecting with S-Video (fair) Connecting with Composite (Fair) 1. Make sure the power of the TV and your DVD player is 1. Make sure the power of the TV and your DVD player is turned off. turned off. 2. Obtain a Yellow Video Cable. Connect the Yellow Video 2. Obtain an S-Video Cable. Connect the S-Video connector to connector to both your DVD player and Composite’s Yellow both your DVD player and Comp
Summary of the content on the page No. 14
TV Installation – Rear Panel Connection Diagrams Connecting with CONNECTINg TO A SATEll ITE OR CABl E SET-TOP BOX Component (Better) Connecting with HDMI (Best) 1. Make sure the power of the TV and your set-top box is 1. Make sure the power of TV and your set-top box is turned off. turned off. 2. Obtain a Component Cable. Connect the green color 2. Connect a HDMI cable to the HDMI output of your set-top connector to both your set-top box and Component 1’s green box and the other end to the
Summary of the content on the page No. 15
TV Installation – Rear Panel Connection Diagrams CONNECTINg TO A SATEll ITE OR CABl E SET-TOP BOX (Continued) Connecting with Connecting with S-Video (Fair) Composite (Fair) 1. Make sure the power of the TV and your DVD player is 1. Make sure the power of the TV and your DVD player is turned off. turned off. 2. Obtain a Yellow Video Cable. Connect the Yellow Video 2. Obtain an S-Video Cable. Connect the S-Video connector connector to both your DVD player and Composite’s Yellow to both your
Summary of the content on the page No. 16
TV Installation – Rear Panel Connection Diagrams CONNECTINg TO AN EXTERNAl AMPl IFIER OR AMPl IFIED SPEAKERS Connecting with Coaxial SPDIF Digital (Best) Connecting with RCA Audio Analog (g ood) 1. Make sure the power of the TV and your receiver is turned 1. Make sure the power of the TV and your receiver is turned off. off. 2. Obtain a Coaxial SPDIF cable, connect it to your receiver’s 2. Obtain a 3.5mm stereo/audio cable (if your amplifier coaxial SPDIF digital input and the Coaxial SPDIF
Summary of the content on the page No. 17
TV Installation – Rear Panel Connection Diagrams CONNECTINg TO A PC (Continued) 1. Make sure the power of the TV and your PC is turned off. Connecting with VgA Analog (g ood) 2. Obtain a 15-pin D-Sub VGA cable, connect to the VGA output of your PC and the other end to the VGA port off the back of your TV. 3. Obtain a 3.5 mm Mini-jack, connect to the audio out of your PC and the other end to the VGA Stereo Input port. 4. Turn on the power of the TV and your PC. 5. Use the remote control’s sour
Summary of the content on the page No. 18
TV Installation - Connecting the Power Cord Connecting the Power Cord WARNING: TV AND GFCI RECEPTACLE MUST BE INSTALLED AT LEAST 5 FEET AWAY FROM STANDING WATER , SUCH AS (BUT NOT LIMITED TO) A POOL OR SPA. Connect the power cord after you have made connections to your video equipment. Connect the power cord to a GFCI-protected AC outlet with “in-use” waterproof cover. Warning: TV must be installed at least 5 feet away from standing water, such as (but not limited to) a pool or spa. Side P
Summary of the content on the page No. 19
Remote Control Guide ON – Powers the TV On. OFF – Powers the TV Off. 0~9 – Allows you to set the channels directly. To access a digital channel, use these buttons with the (-) button to switch channels. Dash (-) – Insert the dash for selecting digital channels directly. R – Returns to the previous channel. FREEZE – Freezes the TV picture. Press the button again to unfreeze the picture. SLEEP– Sets time for the TV to turn Off. CC– Selects Closed Caption (CC only works under sources TV, AV1 and
Summary of the content on the page No. 20
On-Screen Display Functions Via the Remote Control Via the TV Side Panel Buttons Adjusting the On Screen Display (OSD) from the Remote Adjusting the On Screen Display from the TV Side Panel Control Buttons Menu - This button opens the OSD CH + p - This button changes the channel to a higher number and also functions the up direction of OSD buttons to move the cursor to the item to be selected. CH - q- This button changes the channel to a lower number and also functions as down direction in
