Summary of the content on the page No. 1
LC-70LE732U
LC-70LE632U
LC-60LE632U
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA
DE CRISTAL LÍQUIDO
OPERATION MANUAL
MODE D'EMPLOI
MANUAL DE OPERACIÓN
IMPORTANT : Please read this operation manual before starting operating the equipment.
IMPORTANT : Veuillez lire ce mode d'emploi avant de commencer à utiliser l'appareil.
IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.
ESP ESP ESPAÑO
Summary of the content on the page No. 2
Summary of the content on the page No. 3
LC-70LE732U LC-70LE632U LC-60LE632U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT: Model No.: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The Serial No.: numbers are located at the rear of the TV. IMPORTANT INFORMATION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO WARNING: NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol, within an equilateral triangle, CAUTION is i
Summary of the content on the page No. 4
IMPORTANT INFORMATION CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. DECLARATION OF CONFORMITY: SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-70LE732U/LC-70LE632U/LC-60LE632U This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
Summary of the content on the page No. 5
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safet
Summary of the content on the page No. 6
IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE, ANSI/NFPA 70 connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against ANTENNA voltage surges and built-up static charges. LEAD IN WIRE Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the GROUND mast and supporting stru
Summary of the content on the page No. 7
IMPORTANT SAFETY INSTRUCTIONS Caring for the front panel • Turn off the main power and unplug the AC cord from the wall outlet before handling. • Gently wipe the surface of the front panel with a soft cloth (cotton, fl annel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front panel. • Wiping with a hard cloth or using strong force may scratch the surface of the front panel.
Summary of the content on the page No. 8
Contents IMPORTANT INFORMATION ..................... 1 Enjoying Photo/Music/Video Playback DEAR SHARP CUSTOMER ....................... 3 Connecting a USB Memory Device/ IMPORTANT SAFETY INSTRUCTIONS ........ 3-5 USB Hard Drive .............................. 40 Connecting a Home Network (DLNA) Server . . . 40 Supplied Accessories ............................ 7 Select the Files to Play Back ................... 41 QUICK REFERENCE Playing Back Files on a USB Memory Device ................. 42-46 At
Summary of the content on the page No. 9
Supplied Accessories Make sure the following accessories are provided with the product. Remote control unit “AAA” size battery Stand unit Operation manual Connection guide (g1) Page 8 (g2) Page 9 (g1) Page 7 (g1) (g1) • Always use the AC cord supplied with the TV. • The illustrations above are for explanation purposes and may vary slightly from the actual accessories. QUICK REFERENCE Attaching the Stand • Before attaching (or detaching) the stand, unplug the AC cord. • Before performing work s
Summary of the content on the page No. 10
QUICK REFERENCE QUICK INSTALLATION TIPS Experiencing HD Images Attach your antenna to the back of the television. An HDTV without an HD source is just an ordinary 1 (See page 9.) TV. To enjoy HD images on the TV, you should get Connect the AC plug for the television into the AC 2 HD programming from the following: outlet. • Over-the-air broadcasting via HD quality antenna LC-70LE732U/LC-70LE632U ■ • HD cable/satellite subscription • HD compatible external equipment 2 • For information on up
Summary of the content on the page No. 11
Preparation Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. For connecting the antenna cable to the TV, use commercially available cables. Connecting Antenna Cable • Connect the antenna cable to the TV using one of the methods in the illustratio
Summary of the content on the page No. 12
Part Names TV (Front) OPC sensor * Center Icon illumination Remote control sensor (See page 32.) * OPC: Optical Picture Control (See page 26.) TV (Rear/Side) *2 *1 RS-232C terminal POWER PC IN terminal button MENU VIDEO 2 button terminals INPUT VIDEO 1 button terminals Channel buttons COMPONENT (CH / ) terminals Volume buttons (VOL / ) k l *1 AUDIO OUT terminal *1 USB 1 terminal HDMI 1 terminal ARC: Audio Return Channel (See pages 51 and 52.) HDMI 2 terminal Antenna/ USB 2 Cable in terminal
Summary of the content on the page No. 13
Part Names 1 POWER: Switch the TV power on or enter standby. (See Remote Control Unit page 17.) 2TV, STB, DVD•VCR, AUDIO: Switches the remote 1 control for TV, STB, BD, DVD, VCR and AUDIO operation. (See pages 49 to 50 for details.) * To enter the code registration mode, you need to press 18 an appropriate button (STB, DVD•VCR or AUDIO) and DISPLAY at the same time. 19 3 External equipment operational buttons: Operate the 2 external equipment. 4 OPTION: Display the Link Operation Menu scr
Summary of the content on the page No. 14
Introduction to Connections Types of Connection For connecting the TV to external equipment, use commercially available cables. • The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products. Connecting to video equipment or PC ■ Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of your external equipment and use its appropriate terminals for higher quality images. Image Terminal Terminal
Summary of the content on the page No. 15
Connecting to External Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 12 and 21.) For connecting the TV to external equipment, use commercially available cables. CAUTION • To protect equipment, always turn off the TV before connecting any external equipment. • Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making c
Summary of the content on the page No. 16
Connecting to External Equipment ■ When using Component cable (COMPONENT): • Blu-ray disc player • DVD player • HD cable/satellite set-top box Audio cable AUDIO-R (Red) AUDIO-L (White) COMPONENT OUT PR (Red) Y (Green) PB (Blue) Component video cable • To enjoy 1080p display capability, connect your external equipment using an HDMI-certifi ed cable or a component cable and set the equipment to 1080p output. • See page 13 for connecting a Blu-ray disc player, DVD player or an HD cable/satellite
Summary of the content on the page No. 17
Connecting to External Equipment Connecting a Surround System/Audio System ■ When connecting an AV amplifi er for surround system HD Cable/Satellite set-top box HDMI-certified cable *1 HDMI OUT OPTICAL DIGITAL AUDIO INPUT HDMI OUT HDMI IN Optical fiber cable *2 • Letting the TV output the audio to an AV amplifi er: *1 When you connect ARC-compatible equipment, use the HDMI 1 terminal. *2 If the equipment to be connected is not compatible with the ARC, connect an optical fi ber cable. • If the image i
Summary of the content on the page No. 18
Connecting to External Equipment Connecting a PC Refer to page 56 for a list of PC signals compatible with the TV. When using HDMI cable (HDMI 1, 2, 3 or 4): ■ HDMI-certified cable HDMI OUT • Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certifi ed cable to the HDMI 1 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". (See page 56.) • The HDMI terminals only support digi
Summary of the content on the page No. 19
Watching TV Turning On/Off the Power Initial Installation When you turn on the TV for the fi rst time, it will POWER automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press POWER on the remote control unit. 1. Insert the batteries into the remote control unit. (See page 9.) 2. Connect the antenna cable to the TV. (See page 9.) 3. Plug in the AC cord to the AC outlet. (See page 8.) POWER (On/Standby) Language (Langua
Summary of the content on the page No. 20
Watching TV Antenna & Cable/STB CH Search (Channel search) Channel auto search makes the TV look for all Select the type of connection you will use to channels viewable in the set area. watch TV. 5 When "Air" is selected in Antenna setting: c/d Press to select "Antenna & Cable" or "Set- 3 c/d Press to select "Start", and then press top box", and then press ENTER. ENTER. Antenna & Cable Set-top box Start Cancel To watch TV via an antenna or cable When "Cable" is selected in Antenna setti
