Summary of the content on the page No. 1
ENGLISH FRANÇAIS
PN-G655U
LCD MONITOR
MONITEUR LCD
OPERATION MANUAL
MODE D’EMPLOI
ENGLISH ...... E1
FRANÇAIS .... F1
Summary of the content on the page No. 2
Summary of the content on the page No. 3
ENGLISH PN-G655U LCD MONITOR ENGLISH IMPORTANT: To aid reporting in case of loss or theft, please record the Model No.: product’s model and serial numbers in the space provided. The numbers are located in the rear of the product. Serial No.: U.S.A. ONLY IMPORTANT INFORMATION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT WARNING: EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the CAUTION user to
Summary of the content on the page No. 4
IMPORTANT INFORMATION (Continued) WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. U.S.A. ONLY CAUTION: Use the supplied power cord as it is. NOTE: This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
Summary of the content on the page No. 5
ENGLISH DEAR SHARP CUSTOMER Thank you for your purchase of a SHARP LCD product. To ensure safety and many years of trouble-free operation of your product, please read the Safety Precautions carefully before using this product. SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can r
Summary of the content on the page No. 6
SAFETY PRECAUTIONS (Continued) 15. Replacement parts — In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger. 16. Safety checks — Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the product
Summary of the content on the page No. 7
ENGLISH TIPS AND SAFETY INSTRUCTIONS - The TFT color LCD panel used in this monitor is made with The Power Cord the application of high precision technology. However, there - Do not damage the power cord nor place heavy objects on may be minute points on the screen where pixels never light it, stretch it or over bend it. Also, do not add extension cords. or are permanently lit. Also, if the screen is viewed from Damage to the cord may result in fire or electric shock. an acute angle there
Summary of the content on the page No. 8
Contents Introduction Basic Operation IMPORTANT INFORMATION ............................................1 Turning Power On/Off ....................................................14 DEAR SHARP CUSTOMER ..............................................3 Turning on the main power ........................................14 SAFETY PRECAUTIONS.................................................. 3 Turning power on/off ..................................................14 TIPS AND SAFETY INSTRUCTIONS .......
Summary of the content on the page No. 9
ENGLISH Supplied Accessories If any component should be missing, please contact your dealer. � Liquid Crystal Display: 1 � Remote control unit: 1 � Power cord (Approx. 13.1 feet [4 m]): 1 � “AA” size battery: 2 � CD-ROM (Utility Disk for Windows): 1 � Operation manual: 1 � Stand hole protection cover: 2 * Sharp Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission. * For environmental protection! Do not dispose of batteries in household waste. F
Summary of the content on the page No. 10
Part Names Rear view 1. External speaker terminals (See page 11.) 16 17 2. PC/AV audio output terminals (See page 11.) 3. AV audio input terminals (See page 10.) 4. PC/AV output terminal (DVI-D) (See page 11.) 5. PC1 input terminal (DVI-D) (See page 10.) AV1 input terminal (DVI-D) (See page 10.) 15 6. PC2 input terminal (Mini D-sub 15 pin) (See page 10.) 7. PC audio input terminal (See page 10.) 8. PC3 input terminals (BNC) (See page 10.) 9. AV3 input terminal (BNC) (See page 10.) 1
Summary of the content on the page No. 11
ENGLISH How to Install the Monitor Mounting precautions • Since the monitor is heavy, consult your dealer before installation. • When installing or moving the monitor, ensure that this is carried out by at least 2 people. • When moving the monitor, be sure to hold it with the handles both on the rear and the unit bottom. Do not hold the LCD panel. This may cause product damage, failure, or injury. • Install the monitor with the surface perpendicular to a level surface. If necessary, limit
Summary of the content on the page No. 12
Connecting Peripheral Equipment Caution Connection with AV equipment • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ AV1 input terminal disconnecting cables. Also, read the manual of the equipment to be connected. • Be careful not to mix up the input terminal with the output terminal when connecting cables. Mixing up the input and output terminals may cause malfunctions and the other AV2 input terminals problems. AV audio input te
Summary of the content on the page No. 13
ENGLISH Connecting Peripheral Equipment Other terminals Connecting multiple monitors PC/AV audio output terminals You can connect multiple monitors (up to 5 monitors) in a • Audio from the equipment connected to the AV audio input daisy chain by using the PC1/AV1 input terminals and PC/AV terminals or PC audio input terminal is output. Connect to output terminals of this monitor. the audio input terminals of the connected equipment using a commercially available audio cable (RCA). Connection
Summary of the content on the page No. 14
Connecting the Power Cord 1. Turn off the main power switch. Caution 2. Plug the power cord (supplied) into the AC input terminal. • Do not use a power cord other than the one supplied with 3. Plug the power cord (supplied) into the AC power outlet. the monitor. Be sure to use a power outlet of AC 120 V (60 Hz). Using power supply other than the one specified may cause fire. Main power switch Power outlet 1 3 2 AC input terminal Power cord (Supplied) Preparing the Remote Control Unit Installi
Summary of the content on the page No. 15
ENGLISH Removing the Temporary Stand Prepare wall-hanging brackets or a stand to mount the monitor unit. Read the manual for the brackets or stand for the proper mounting procedure. (The screw holes for mounting brackets (M10 x 4 holes) are provided on the rear of the monitor.) Caution • The monitor is heavy. It must be handled by 2 or more people. • This monitor is fixed to the temporary stand when shipped from the factory. Please note that this stand is for temporary use only until the monito
Summary of the content on the page No. 16
Turning Power On/Off Caution TIPS • Turn on the monitor first before turning on the PC or • If the monitor is in the input signal standby mode and you playback device. press the POWER button on the remote control unit, the monitor enters standby mode. • You can turn on/off the monitor by pressing the power Turning on the main power switch of the monitor. • Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode. Date/time setting • If the time has yet to be set
Summary of the content on the page No. 17
ENGLISH Basic Operation 5. BRIGHT +/- (Backlight adjustment) Pressing or displays the BRIGHT menu when the menu screen is not displayed. 1 B R I G H T 15 2 3 Press or to adjust the brightness. 4 * If you do not press any buttons for about 4 seconds, the BRIGHT menu automatically disappears. 5 6. SIZE (Screen size selection) The menu is displayed. Press or to select the screen size. (See page 16.) 7. DISPLAY 6 7 Displays monitor information. The display disappears when this button is pre
Summary of the content on the page No. 18
Basic Operation Switching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE PC input Displays image so it fills the entire screen. AV input An image with a 4:3 aspect ratio is stretched to fill the entire screen. ZOOM 1 PC input An image with a 4:3 aspect ratio is enlarged to fill the entire screen without changing the aspect ratio. The edges of the image may be cut off. AV input ZOOM 2 PC input Use this size if ZOOM 1 cuts
Summary of the content on the page No. 19
ENGLISH Menu Items Menu screen display Displaying the menu screen 1 3 2 4 Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu SCREEN PICTURE 1/2 PC2 ANALOG items. See pages 18 to 20 for details of each menu items. PICTURE AUTO AUDIO CONTRAST 30 Example of operation SETUP BLACK LEVEL 96 (Adjusting CONTRAST in the PICTURE menu) OPTION SHARPNESS 12 MENU 1. Press to display the menu screen. ENLARGE PIP/PbyP SCREEN SCREEN 1/1 PC2 A
Summary of the content on the page No. 20
Menu Items COLOR MODE Menu item details Changes the color mode on the screen. The color mode on The menu will differ depending on the input mode. the screen can also be changed using a remote control unit. (See page 15.) SCREEN (PC2/PC3) * sRGB is PC input only. See page 15 for details. AUTO WHITE BALANCE The CLOCK, PHASE, H-POS, and V-POS are automatically THRU .............. Displays the input signal level as is. adjusted. (for PC1 only) Pressing performs adjustment. PRESET .........
