Our goal is to provide you with a quick access to the content of the user manual for Sanyo AVL-209. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Sanyo AVL-209.
If looking through the Sanyo AVL-209 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Sanyo AVL-209 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Sanyo AVL-209. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Instruction ManualAVL-209 HD (high-definition)* LCD TV* HD Cable or Satellite receiver required.Before connecting, operating or adjusting this product, please read the manual completely.Please keep this manual for future reference.Call our HELPLINE 1-800-263-2244 for further assistance.SANYO Canada Inc.www.sanyo.ca
Table of Contents Important Information ............................................................................................1 Important Safety Precautions..................................................................................2 Preparation ...........................................................................................................5 Identification of Controls........................................................................................7 Connections......
Important Information Thank-you for choosing SANYO. This model has many features to enhance your viewing, such as HDTV (via suitable cable or satellite receiver) and computer monitor capability. Please read all instructions. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol within an equilateral triangle is intended to CAUTION alert the user to the presence of uninsulated dangerous voltage with
Important Safety Precautions Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the
Important Safety Precautions (continued) 12. Stand---Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting
Important Safety Precautions (continued) 22. Power source---This product is intended to be supplied by a listed power supply indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to th
30 Preparation Using the Remote Control Summary of the content on the page No. 8 Preparation (continued) Antenna Connection CABLE TV (CATV) CONNECTION A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75- ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. Terminal. Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company. This converter/descrambler is necessary fo Summary of the content on the page No. 9 Identification of Controls Main Unit CH+ Channel Up CH- Channel Down VOL+ Volume Up VOL- Volume Down MENU MENU Remote Sensor SOURCE Select Input Signal Power Indicator Power On/ Standby 1. SOURCE To select the input signal source. 2. MENU Press this button to access the MENU main page. 3. CH+/- Press these two buttons to directly change the TV channel; In OSD MENU, press these buttons to choose the OSD items. 4. VOL+/- Press the VOL+ or VOL- button to directly increase or decrease the sound volu Summary of the content on the page No. 10 Identification of Controls (continued) Main Unit 1. D-Sub input/Audio Line in Connect to the D-Sub/audio output jacks on your PC. 2. Component Inputs (Y, Pb/Cb, Pr/Cr, Audio L, R) Connect to the audio and component output jacks of a DVD player or Set-Top Box. 3. Antenna input Allows you to connect cable or outdoor antenna. 4. S-Video input Receive a S-Video signal from external source such as VCR or DVD player. 5. AV inputs (Video, Audio L, R) Receive video/audio signals from external sourc Summary of the content on the page No. 11 Identification of Controls (continued) Remote Control To display channel status To select Stereo mode or signal information Sound mute Turn the unit on or off [0-9] number buttons: Direct channel select To access the MENU main page To quickly jump between current or exit menu operation channel and last selected channel. To switch channels; To adjust volume; In MENU operation, use ENTER In MENU operation, use CH+/- or VOL+/- to adjust selected to select menu item item To confirm your operat Summary of the content on the page No. 12 or Connections Cautions Before Connecting Carefully check the terminals for position and type before making any connections. The illustration of the external equipment may be different depending on your model. Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their terminals. Refer to the operating manual of the external device as well. When connecting an external device, turn the power off on the panel to avoid any issues. Connect Summary of the content on the page No. 13 Connections (continued) Connect a Camcorder OUT IN Y Y Yellow (VIDEO) R AUDIO L VIDEO W W White (AUDIO L) R R Red (AUDIO R ) R R W W Y Y Audio cable Video cable How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder. To playback Camcorder 1. Turn on your LCD TV, press SOURCE button repeatedly to select Video. 2. Turn on your camcorder and set it to output mode. (For details, refer to your camcorder owner's manual.) 3. Insert the tape int Summary of the content on the page No. 14 Connections (continued) Connect a DVD player G G R R W W R R B B COMPONENT AUDIO Y P P r L AUDIO R b Y Y Yellow (VIDEO) R R Red (AUDIO R, P /C ) r r AV OUT S- V I D E O R AUDIO L V I D E O G G Green (Y) B B Blue (P /C ) b b Rear of the DVD player or HD receiver How to connect a DVD Player or HDTV Cable/Satellite receiver using Component Video Connections: Connect the Video cable between the Y, Pb, Pr input jacks on the unit and Y, Pb, Pr ( or Y, Cb, Cr) output jacks on the DVD player or H Summary of the content on the page No. 15 Connections (continued) Connect a PC How to connect: Connect a D-Sub cable between the D-Sub jack on the PC and the D-Sub input jack on the unit. Connect an Audio cable between the AUDIO output on the PC and AUDIO input jack on the unit. To Watch the PC screen 1. Turn on your LCD TV, press SOURCE button repeatedly to select D-Sub. Input Source 2. Turn on your PC and check for PC system requirements. D-Sub 3. Adjust the screen resolution and settings on your computer to the required Sourc Summary of the content on the page No. 16 Turning the Unit On and Off Turning the Unit On and Off Turning On Insert the power cord into the wall outlet. Press the Power button on the remote control. The unit will be turned on and you will be ready to use its features. Turning Off With the power on, press the Power button on the remote control to turn off. Note: You can also use the Power button on the control panel on the main unit. Viewing the MENUs and Displays Your LCD TV has a simple, easy-to-use menu system that appears Summary of the content on the page No. 17 Memorizing the Channels Your LCD TV can memorize and store all the available channels for both antenna and cable channels. After the available channels are memorized, use CH+/- to scan the channels. Selecting the Signal Source Before your LCD TV can memorize the available channels, you must specify the type of signal source that is connected to the unit. (i.e., an antenna or cable system) Channel Press MENU to display the menu main page. 1 Auto Searching Source Cable Channel Skip On Off Fi Summary of the content on the page No. 18 Memorizing the Channels (continued) Manual Fine Tuning Channel Auto Searching Repeat steps 1~3 in [Selecting the Signal Source] to access Channel page. 1 Source C a b l e Channel Skip On Off Fine Tune AFC On Off Press CH+/- repeatedly to select Fine Tune item. 2 Frequency 55.25 MHz Press VOL+/- to fine tune till the best possible picture and sound are Move Select Menu to exit 3 obtained. If you fine tune a program manually, the AFC will be turned off automatically. Summary of the content on the page No. 19 Basic Operations Changing Channels Using the Channel Buttons (CH+ or CH-) Press the CH+ or CH- to change channels. When you press the CH+ or CH-, the unit changes channels in sequence. You will see all the channels that the unit has memorized. You will not see channels that were erased. Direct Accessing Channels Press the number buttons to go directly to a channel. To select a one-digit channel: press the 0-9 number buttons to input the channel number and press ENTER or wait for some seconds Summary of the content on the page No. 20 Setting Picture Using the Preset Picture Mode Picture Press MENU to display the menu main 1 Picture Mode Normal Brightness 50 The picture page will be displayed automatically. Contrast 75 Color 60 Press ENTER or VOL+/- to access the Picture submenu. 2 Tint 50 Sharpness 12 The Picture Mode item is highlighted automatically. Press ENTER or VOL+/- to select a desired picture mode. 3 Move Select Menu to exit You may also use the P.M button to quickly select picture mode. There are three preset pi
Preparation (continued) Antenna Connection CABLE TV (CATV) CONNECTION A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75- ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. Terminal. Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company. This converter/descrambler is necessary fo
Identification of Controls Main Unit CH+ Channel Up CH- Channel Down VOL+ Volume Up VOL- Volume Down MENU MENU Remote Sensor SOURCE Select Input Signal Power Indicator Power On/ Standby 1. SOURCE To select the input signal source. 2. MENU Press this button to access the MENU main page. 3. CH+/- Press these two buttons to directly change the TV channel; In OSD MENU, press these buttons to choose the OSD items. 4. VOL+/- Press the VOL+ or VOL- button to directly increase or decrease the sound volu
Identification of Controls (continued) Main Unit 1. D-Sub input/Audio Line in Connect to the D-Sub/audio output jacks on your PC. 2. Component Inputs (Y, Pb/Cb, Pr/Cr, Audio L, R) Connect to the audio and component output jacks of a DVD player or Set-Top Box. 3. Antenna input Allows you to connect cable or outdoor antenna. 4. S-Video input Receive a S-Video signal from external source such as VCR or DVD player. 5. AV inputs (Video, Audio L, R) Receive video/audio signals from external sourc
Identification of Controls (continued) Remote Control To display channel status To select Stereo mode or signal information Sound mute Turn the unit on or off [0-9] number buttons: Direct channel select To access the MENU main page To quickly jump between current or exit menu operation channel and last selected channel. To switch channels; To adjust volume; In MENU operation, use ENTER In MENU operation, use CH+/- or VOL+/- to adjust selected to select menu item item To confirm your operat
or Connections Cautions Before Connecting Carefully check the terminals for position and type before making any connections. The illustration of the external equipment may be different depending on your model. Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their terminals. Refer to the operating manual of the external device as well. When connecting an external device, turn the power off on the panel to avoid any issues. Connect
Connections (continued) Connect a Camcorder OUT IN Y Y Yellow (VIDEO) R AUDIO L VIDEO W W White (AUDIO L) R R Red (AUDIO R ) R R W W Y Y Audio cable Video cable How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder. To playback Camcorder 1. Turn on your LCD TV, press SOURCE button repeatedly to select Video. 2. Turn on your camcorder and set it to output mode. (For details, refer to your camcorder owner's manual.) 3. Insert the tape int
Connections (continued) Connect a DVD player G G R R W W R R B B COMPONENT AUDIO Y P P r L AUDIO R b Y Y Yellow (VIDEO) R R Red (AUDIO R, P /C ) r r AV OUT S- V I D E O R AUDIO L V I D E O G G Green (Y) B B Blue (P /C ) b b Rear of the DVD player or HD receiver How to connect a DVD Player or HDTV Cable/Satellite receiver using Component Video Connections: Connect the Video cable between the Y, Pb, Pr input jacks on the unit and Y, Pb, Pr ( or Y, Cb, Cr) output jacks on the DVD player or H
Connections (continued) Connect a PC How to connect: Connect a D-Sub cable between the D-Sub jack on the PC and the D-Sub input jack on the unit. Connect an Audio cable between the AUDIO output on the PC and AUDIO input jack on the unit. To Watch the PC screen 1. Turn on your LCD TV, press SOURCE button repeatedly to select D-Sub. Input Source 2. Turn on your PC and check for PC system requirements. D-Sub 3. Adjust the screen resolution and settings on your computer to the required Sourc
Turning the Unit On and Off Turning the Unit On and Off Turning On Insert the power cord into the wall outlet. Press the Power button on the remote control. The unit will be turned on and you will be ready to use its features. Turning Off With the power on, press the Power button on the remote control to turn off. Note: You can also use the Power button on the control panel on the main unit. Viewing the MENUs and Displays Your LCD TV has a simple, easy-to-use menu system that appears
Memorizing the Channels Your LCD TV can memorize and store all the available channels for both antenna and cable channels. After the available channels are memorized, use CH+/- to scan the channels. Selecting the Signal Source Before your LCD TV can memorize the available channels, you must specify the type of signal source that is connected to the unit. (i.e., an antenna or cable system) Channel Press MENU to display the menu main page. 1 Auto Searching Source Cable Channel Skip On Off Fi
Memorizing the Channels (continued) Manual Fine Tuning Channel Auto Searching Repeat steps 1~3 in [Selecting the Signal Source] to access Channel page. 1 Source C a b l e Channel Skip On Off Fine Tune AFC On Off Press CH+/- repeatedly to select Fine Tune item. 2 Frequency 55.25 MHz Press VOL+/- to fine tune till the best possible picture and sound are Move Select Menu to exit 3 obtained. If you fine tune a program manually, the AFC will be turned off automatically.
Basic Operations Changing Channels Using the Channel Buttons (CH+ or CH-) Press the CH+ or CH- to change channels. When you press the CH+ or CH-, the unit changes channels in sequence. You will see all the channels that the unit has memorized. You will not see channels that were erased. Direct Accessing Channels Press the number buttons to go directly to a channel. To select a one-digit channel: press the 0-9 number buttons to input the channel number and press ENTER or wait for some seconds
Setting Picture Using the Preset Picture Mode Picture Press MENU to display the menu main 1 Picture Mode Normal Brightness 50 The picture page will be displayed automatically. Contrast 75 Color 60 Press ENTER or VOL+/- to access the Picture submenu. 2 Tint 50 Sharpness 12 The Picture Mode item is highlighted automatically. Press ENTER or VOL+/- to select a desired picture mode. 3 Move Select Menu to exit You may also use the P.M button to quickly select picture mode. There are three preset pi
