Summary of the content on the page No. 1
SyncMaster 460DR-2
LCD Display
User Manual
The color and the appearance may differ depending on the
product, and the specifications are subject to change
without prior notice to improve the performance.
Summary of the content on the page No. 2
Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property dam- age. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Note Important to read and under- Prohibited stand at all times Disconnect the plug from the Do not disassemble outlet Ground to prevent an electric Do n
Summary of the content on the page No. 3
Safety Instructions • Wipe the monitor using a soft, slightly damp cloth that has been squeezed . Do not use a cleaning agent that contains alcohol or solvents, or that is surface active. Otherwise, the exterior may discolor or crack or the panel coating may come off. Do not spray water or cleaning agent directly onto the monitor. Otherwise, the liquid may sink into the monitor and cause a fire, electric shock, or failure. • Clean the exterior of the monitor using a soft cloth dampened with a
Summary of the content on the page No. 4
Safety Instructions Do not forcefully bend or pull the power plug and do not place any heavy material on it. • Otherwise, this may result in fire. Do not connect multiple appliances to the same power outlet. • Otherwise, this may cause fire due to overheating. Do not disconnect the power cord while using the product. • Otherwise, this may result in damage to the product due to electric shock. To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore
Summary of the content on the page No. 5
Safety Instructions • Otherwise, this may result in fire. Keep heating appliances as far away from the power cord or the product as possible. • Otherwise, this may result in electric shock or fire. Do not install it in a badly ventilated location such as a bookcase or closet. • Otherwise, this may result in fire due to an increase in the in- ternal temperature. When putting the product down, make sure to put it down softly. • Otherwise, this may result in damage to the screen display. Do not pla
Summary of the content on the page No. 6
Safety Instructions If there is a strange smell or a strange sound or smoke is coming from the product, disconnect the power plug immediately and con- tact a Service Center. • Otherwise, this may result in electric shock or fire. Do not place this product in a location exposed to moisture, dust, smoke, water, or in a car. • Otherwise, this may result in electric shock or fire. When you drop the product or the case is broken, turn the power off and disconnect the power cord. Contact a Service
Summary of the content on the page No. 7
Safety Instructions When using a fixed screen for a long time, an afterimage or stain may occur. • If you are not using your product for a long period of time, put it into sleep mode or use a moving screen saver. Set a resolution and frequency appropriate to the product. • Otherwise, your eyesight may be damaged. When using headphones or earphones, do not turn the volume too high. • Having the sound too loud may damage your hearing. To avoid eyestrain, do not sit too close to the product. T
Summary of the content on the page No. 8
Safety Instructions Be careful that children do not place the battery in their mouths when removed from the remote control. Place the battery in a lo- cation that children or infants cannot reach. • If children have had the battery in their mouths, consult your doctor immediately. When replacing the battery, insert it with the right polarity (+, -). • Otherwise, the battery may become damaged or it may cause fire, personal injury or damage due to leakage of the internal liquid. Use only the s
Summary of the content on the page No. 9
Safety Instructions Be careful when adjusting the angle of the product or the height of the stand. • This may result in personal injury as your hand or fingers may become caught. • Also, if you tilt the product too far, it may fall and cause personal injury. Do not install the product in a location low enough for children to reach. • Otherwise, it may fall and result in personal injury. • Since the front part of the product is heavy, install the product on a level and stable surface. Do not p
Summary of the content on the page No. 10
Introduction Package Contents Checking the Contents of the Package Remove the lock from the package box, as shown in the figure above. Lift up the package box by Check the contents of the Remove the styrofoam holding the grooves on package. and vinyl cover. both sides of the package box. Note • After unpacking the package, make sure to check the contents of the package. • Store the packaging box in case you need to move the product later. • If any items are missing, contact your dealer. • Conta
Summary of the content on the page No. 11
Introduction LCD Display Manuals Quick Setup Guide Warranty Card User Manual (Not available in some lo- cations) Cables Power Cord Others Remote Control Batteries (AAA X 2) (Not available in some lo- cations) Sold separately Wall Mount KIT RCA-Stereo Cable HDMI-DVI Cable D-Sub Cable RGB to Component Cable DP Cable HDMI Cable Stereo Cable AV Cable
Summary of the content on the page No. 12
Introduction Sold separately DVI Cable RS232C Cable RCA Cable Network box Note Accessories that can be purchased with the product vary by country. Your LCD Display Control Panel MENU button [MENU] Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu or return to the previous menu. Navigate buttons (Up-Down buttons) Moves from one menu item to another vertically or adjusts selected menu values. Adjust buttons (Left-Right buttons) / Volume buttons Moves from one menu
Summary of the content on the page No. 13
Introduction Activates a highlighted menu item. SOURCE button [SOURCE] Switches from PC mode to Video mode. Selects the input source that an external device is connected to. [PC] → [DVI] → [AV] → [Component] → [HDMI1] → [HDMI2] → [Dis- playPort] D.MENU button Not available Power button [ ] Use this button for turning the LCD Display on and off. Brightness Sensor (Optional) Automatically detects the surrounding brightness it accordingly. Note This function is activated only on the models equippe
Summary of the content on the page No. 14
Introduction POWER ON / OFF Switches the LCD Display On/Off. POWER The power cord plugs into the LCD Display and the wall outlet. RGB/COMPONENT IN (PC/COMPO- NENT Connection Terminal (Input)) • Connect the [RGB/COMPONENT IN] port on the monitor to the RGB port on the PC using the D-SUB cable. • Connect the [RGB/COMPONENT IN] port on the monitor to the COMPONENT port on the external device using the RGB to COMPONENT cable. • Connect the [RGB/COMPONENT IN] port on the monitor to the BNC port
Summary of the content on the page No. 15
Introduction Connect the [AV IN] terminal of your monitor to the video output terminal of the external device using a VIDEO cable. AUDIO OUT Connect a headphone or an External speak- er. HDMI IN 1 • Connect the [HDMI IN 1] terminal at the back of your LCD Display to the HDMI terminal of your digital output device us- ing a HDMI cable. • Up to HDMI 1.3 can be supported. Note • A normal external device(DVD player or camcorder, etc.) can be connected to the [HDMI IN 1] terminal. HDMI IN 2 (MAG
Summary of the content on the page No. 16
Introduction Note Go to Multi Control and select RJ45 MDC as the MDC Connection. RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port Connect a serial cable (cross type) to [RS232C] on the product and RS232C on the PC. To use an MDC, the MDC program must be installed on the PC. Note Go to Multi Control and select RS232C MDC as the MDC Connection. Note See the "Connections" section for details about cable connections. Remote Control Note The performance of the remote
Summary of the content on the page No. 17
Introduction SOURCE OFF Number Buttons + VOL - CONTENT (HOME) MagicInfo Lite TOOLS Up-Down Left-Right / Enter buttons RETURN The Color button / The PC/DVI/HDMI/DP selection button MagicInfo 3D ( ) / / / ( ) / D.MENU MUTE CH MENU BLANK INFO EXIT LOCK Power on the product. Select a connected source device. SOURCE Power off the product. OFF Enter the password in the OSD menu. Number Buttons Not available. Adjust the volume. + VOL - Not available. CONTENT (HOME) Not available.
Summary of the content on the page No. 18
Introduction Not available. TOOLS Up-Down Left-Right button : Move to the upper, lower, left Up-Down Left-Right / En- or right menu, or adjust an option's setting. ter buttons Enter button : Activates a highlighted menu item. Return to the previous menu. RETURN Manually select a connected input source from PC, DVI, The Color button / The HDMI or DP. PC/DVI/HDMI/DP selection button MagicInfo Quick Launch Button. MagicInfo MagicInfo can only be enabled when a network box(sold separately)is c
Summary of the content on the page No. 19
Introduction Dimensions Dimensions
Summary of the content on the page No. 20
Introduction Installing a Wall Mount Preparing before installing Wall-Mount To install a wall-mount from another manufactur- er, use the Holder-Ring. Installing the Wall Mount Kit The wall mount kit(sold separately) allows you to mount the product on the wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount. We recommend you contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible f
