Summary of the content on the page No. 1
DLP DLP TV TV
Owner’s Instructions
HL-T4675S
HL-T5075S
HL-T5675S
Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
▪ Model _______________ ▪ Serial No. _______________
Summary of the content on the page No. 2
A Guide to Digital TV • What is Digital Television? Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set. Using DTV, broadcasters can transmit high definition TV (HDTV) images, Dolby digital surround audio, and new services such as multicasting (transmitting more than one program on the same TV channel) and datacasting. Several of these services can be combined into a single digital broadcast. Digital Television Services • Digital Picture Qua
Summary of the content on the page No. 3
Q&A 1. Is the antenna I use for existing TV reception good enough for DTV? Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and works well with many existing TV antennas. However, DTV broadcast channel assignments are different than analog channels. You should find out whether your local DTV broadcasts are on VHF (channels 2-13) or UHF (channels 14-69) to see if you need a different antenna. If your DTV channels are on UHF and you already get good UHF receptio
Summary of the content on the page No. 4
Contents CHANNEL CONTROL GENERAL INFORMATION ■ Clearing Scrambled Channels - Digital .......................37 ■ Viewing Position .........................................................5 ■ Adding and Erasing Channels ....................................37 ■ List of Features ..........................................................5 ■ Setting Your Favorite Channels ..................................38 ■ Checking Parts ...........................................................6 ■ Viewing the C
Summary of the content on the page No. 5
General Information Viewing Position To optimize your viewing comfort, please follow the guidelines below for viewing distance. If viewing for an extended period of time, sit as far back from the screen as possible. ➢ When installing the product, make sure to keep it away from the wall (more than 10cm / 4inches) for ventilation purposes. Poor ventilation may cause an increase in the internal temperature of the product, resulting in a shortened component life and degraded performance. List
Summary of the content on the page No. 6
Checking Parts Owner’s Instructions Remote Control Warranty Card/ Power Cord Cloth-Clean Registration Card/ (BP59-00124)/ (3903-000144) Safety Guide Manual/ AAA Batteries Quick Guide Manual Sold Separately S-Video Cable Antenna Cable Component Cables Audio Cables Video Cables Replacement Lamp (BP96-01653A) For purchasing a replacement lamp, ask at a nearby service center. D-Sub Cable PC Audio Cable HDMI Cable HDMI/DVI Cable Optical Cable • Use authorized lamps only. The company cannot guar
Summary of the content on the page No. 7
1 SOURCE 5 (ENTER) Toggles between all the available input sources Press to confirm a selection. (TV, AV1, AV2, S-Video1, S-Video2, Component1, 6 POWER Component2, PC, HDMI1, or HDMI2). Press to turn the TV on and off. 2 MENU 7 Remote Control Sensor Press to see an on-screen menu of your TV’s features. Aim the remote control towards this spot on the TV. 3 + VOL – 8 Indicator Lights Press to increase or decrease the volume. Blinks and turns off when the power is on and lights up in In the on-sc
Summary of the content on the page No. 8
Viewing the Connection Panel Right Side Panel Jacks Use the side panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For more information on connecting equipment, see pages 12-15. ➢ The product color and shape may vary depending on the model. 1 ANT 1 IN(CABLE)/ANT 2 IN(AIR) 0 PC AUDIO IN 75Ω Coaxial connector for Air/Cable Network. Connect to the audio output jack on your PC. 2 VIDEO/AUDIO-L/R (AV IN 1, 2) ! SERVICE 2 Video input for externa
Summary of the content on the page No. 9
Remote Control You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD Player, or Set-Top Box. 1 POWER ) PRE-CH Turns the TV on and off. Tunes to the previous channel. 2 Numeric Buttons a FAV.CH Press to directly select a channel. Press to switch to your favorite channels. 3 – Press to select additional channels b HDMI being broadcast by
Summary of the content on the page No. 10
Installing Batteries in the Remote Control 1 Lift the cover at the back of the remote control upward as shown in the figure. 2 Install two AAA size batteries. ➢ Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. ➢ Do not mix battery types, i.e. alkaline and manganese. 3 Close the cover as shown in the figure. ➢ Remove the batteries and store them in a cool and dry place if you won’t be using the remote control for a long time. The remote control c
Summary of the content on the page No. 11
Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box 1 Plug the incoming cable into the ANT 1 IN(CABLE) terminal on the side of the TV. ➢ Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels. Connecting to a Cable Box that Descrambles All Channels 1 Find the cable that is connected to the ANT OUT terminal on your cable box. ➢ This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”. A
Summary of the content on the page No. 12
Connecting a VCR Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 10~11). Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Unplug the cable or antenna from the side of the TV 2 Connect the cable or antenna to the ANT IN terminal on the back of the VCR. 3 Connect an Antenna Cable between the ANT OUT terminal on the VCR and the ANT 1 IN(CABLE) TV Side Pane
Summary of the content on the page No. 13
Connecting a Camcorder The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR. 1 Connect a Video Cable or S-Video Cable between the AV IN 1 [VIDEO] TV Side Panel or [S-Video] (or AV IN 2 [VIDEO] or [S-VIDEO]) jack on the TV and the 1 S-Video Cable(Not supplied) VIDEO OUT jack on the camcorder. or 1 Video Cable(Not supplied) Camcorder 2 Connect Audio Cables between the AV IN 1 [L-AUDIO-R] (or AV IN 2 2
Summary of the content on the page No. 14
Connecting a DVD Player/Set-Top Box via DVI This connection can only be made if there is a DVI Output jack on the external device. 1 Connect a HDMI/DVI Cable or DVI-HDMI Adapter between the TV Side Panel DVD Player/Set-Top Box HDMI 1/DVI IN jack on the TV and the DVI jack on the DVD Player/ Set-Top Box. 2 Connect Audio Cables between the DVI IN [L-AUDIO-R] jack on the TV and the AUDIO OUT jacks on the DVD Player/Set-Top Box. 2 Audio Cable(Not supplied) 1 HDMI/DVI Cable(Not supplied) ➢ Each
Summary of the content on the page No. 15
Connecting an Amplifier/DVD Home Theater 1 Connect Audio Cables between the TV Side Panel AUDIO OUT [L-AUDIO-R] on the TV Amplifier/ and AUDIO IN [L-AUDIO-R] on the DVD Home Theater Amplifier/DVD Home Theater. When an audio amplifier is connected to the “AUDIO OUT [L-AUDIO-R ]” terminals: Decrease the gain (volume) of the TV, and adjust the volume level with the Amplifier’s volume control. 1 Audio Cable (Not supplied) ➢ Each Amplifier/DVD Home Theater has a different side panel configur
Summary of the content on the page No. 16
Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the (Power) button on the front panel. Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently: Menu language, Shop Mode, Channels and Time will be set. 1 Press the POWER button on the remote control. Start The message Menu language, Shop Mode, Channels and Time will be set. Plug Plug & & Play Play is displayed. Select the language of th
Summary of the content on the page No. 17
Setting the Clock Automatically Plug & Play 9 Press the ENTER button. Set to daylight saving time. Press the ▲ or ▼ button to select Off or On, then the ENTER button. The message Select the time zone where you are located. is automatically displayed. DST Off On Move Enter Skip Plug & Play 10 Press the ▲ or ▼ button to highlight the time zone for your local area (and to move the highlight to the appropriate time zone on the map of the United States). Select the time zone where you are loca
Summary of the content on the page No. 18
Using the “-” Button The - button is used to select stations that broadcast a digital signal. For example, for Channel 7-1, press 7, then -, and then 1. ➢ HD indicates the TV is receiving a Digital High Definition signal. SD indicates the TV is receiving a Standard Definition signal. ➢ For quick channel change, press the number buttons, then press the ENTER button. Using the PRE-CH Button to select the Previous Channel Press the PRE-CH button. The TV will switch to the last channel viewed. ➢ T
Summary of the content on the page No. 19
Viewing the Menus 1 With the power on, press the MENU button. Input The main menu appears on the screen. Its left side has five icons: Source List : TV ► Picture, Sound, Channel, Setup, Input. Edit Name ► 2 Use the ▲ or ▼ button to select one of the five icons. Then press the ENTER button to access the icon’s sub-menu. 3 Press the EXIT button to exit. ➢ It takes about one minute until the on-screen menu disappears. Move Enter Exit Memorizing the Channels Your TV can memorize and store all o
Summary of the content on the page No. 20
4 Press the ▲ or ▼ button to select Analog or Digital, then press the ENTER button. Auto Program You can select the correct signal source among STD, HRC and IRC by pressing the Selects a cable signal type for your location. ▲ or ▼ button, then press the ENTER button. Analog To memorize the channels, press the ▲ or ▼ button to select Start, then press the Start STD HRC ENTER button. IRC Digital ➢ If you have Digital cable TV, select the signal source for both Analog and Digital. STD HRC ➢ ST
