Summary of the content on the page No. 1
SyncMaster S19A450BW-1/S19A450BR/S19A450MW/S19A450MR/
S19A450SW/S19A450SR/S22A450BW-1/S22A450MW/S22A450SW/
S24A450B/S24A450BW-1/S24A450M/S24A450MW/S24A450S/
S24A450SW
Monitor
User Manual
The color and the appearance may differ depending on the
product, and the specifications are subject to change
without prior notice to improve the performance.
Summary of the content on the page No. 2
Table Of Contents MAJOR SAFETY PRECAUTIONS Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Custody and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Cleaning the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 INSTALLING THE PRODUCT Package Contents
Summary of the content on the page No. 3
Monitor Self-Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Before Requesting Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 MORE INFORMATION Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 Power Saving Function . . . . . . . . . . . . . . . .
Summary of the content on the page No. 4
1 Major Safety Precautions 1-1 Before You Start Icons used in this manual ICON NAME MEANING Caution Indicates cases where the function may not work or the setting may be canceled. Note Indicates a hint or tip to operate a function. Using this Manual • Make yourself fully aware of the safety precautions before using this product. • If a problem occurs, refer to the 'Troubleshooting' section. Copyright Notice The contents of this manual are subject to change without prior notice for performance im
Summary of the content on the page No. 5
1-2 Custody and Maintenance External Surface and Screen Maintenance Clean the product with a soft dry cloth. • Do not clean the product with an inflammable substance such as benzene or thinner or with a wet cloth. This may result in a problem with the product. • Do not scratch the screen with your fingernails or a sharp object. This may result in scratches or damage to the product. • Do not clean the product directly by spraying water onto the product. If water enters the product, it may res
Summary of the content on the page No. 6
1-3 Cleaning the Monitor Cleaning the Monitor • The panel and exterior of the cutting-edge monitor scratch easily and require careful attention. Clean the monitor according to the following steps. 1. Power off the monitor and PC. 2. Disconnect the power cable from the monitor. To avoid electric shock, be sure you disconnect the cable by gripping the plug and do not touch the cable with wet hands. 3. Wipe the monitor using a soft, slightly damp cloth that has been squeezed . • Do not use a
Summary of the content on the page No. 7
1-4 Safety Precautions Icons used for safety precautions ICON NAME MEANING Failing to follow the precautions marked with this sign, may result in a serious injury or Warning even a fatality. Failing to follow the precautions marked with this sign, may result in a personal injury or Caution property damage. Meaning of Signs Do not perform. Must be followed. The power plug must be unplugged from the Do not disassemble. wall outlet. Do not touch. Must be grounded to prevent electric shock. P
Summary of the content on the page No. 8
Caution Avoid unplugging the power plug while the Make sure to use only the power cord supplied product is operating. by our company. In addition, do not use the power cord of another electric appliance. • Otherwise, it may damage the product due to electric shock. • Otherwise, it may result in electric shock or fire. When unplugging the power plug from the wall Connect the power plug to a wall outlet that can outlet, make sure to hold it by the plug and not be easily reached. by the co
Summary of the content on the page No. 9
Caution Do not let the product drop while moving it. Do not place the product face down on the floor. • This may result in a problem with the product or injury. • This may damage the panel of the product. When installing the product on a console or When putting the product down, handle it shelf, make sure that the front of the product gently. does not protrude out of the console or shelf. • Otherwise, it may result in a problem with • Otherwise, this may cause the product to the product or
Summary of the content on the page No. 10
Avoid moving the product by pulling the power When a gas leak occurs, do not touch the cord or antenna cable. product or the power plug and ventilate immediately. • Otherwise, it may result in electric shock, fire or a problem with the product due to • A spark may result in an explosion or fire. damage to the cable. • During a thunder or lighting storm, do not touch the power cord or antenna cable. Avoid lifting up or move the product by holding Avoid using or placing inflammable spray or o
Summary of the content on the page No. 11
Be careful that adaptor should not be in contact Watching the product from too close a distance with water and therefore not be wet. continuously may damage your eyesight. • This may cause a malfunction, electric shock or fire. Do not use adaptor by the waterside or outside particularly when it rains or snows. Be careful that adaptor should not be wet while cleaning floor with water. Avoid using a humidifier or cooker near the It is important to give your eyes some rest (5 product. minute
Summary of the content on the page No. 12
2 Installing the Product 2-1 Package Contents • Unpack the product and check if all of the following contents have been included. • Store the packaging box in case you need to move the Product at a later stage. Monitor Contents Product Warranty DC-Adapter Installation Manual User Manual (Not available in all locations) Power Cord Stand OPTION DVI Cable D-Sub Cable USB Cable Stereo Cable The cables provided may vary depending on the product you purchase. 2-1 Installing the Product
Summary of the content on the page No. 13
2-2 Installing the Stand Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards. Rotate the stand-body following the arrow as shown Check if the stand-body had rotated to the right location as shown. Push the stand-base into the stand-body following the arrow as shown,when you he
Summary of the content on the page No. 14
Push the adapter forward and then rotate following the arrow to get it out. Hold the base and thumbs press the stand body then pull out the base following the arrow. - Caution Avoid lifting the product holding only the stand. Disassembly is in the reverse order of the assembly. When pivot the monitor from horizontal to vertical,tilt the monitor backward to maxium first. . Stand Stopper 2-2 Installing the Product
Summary of the content on the page No. 15
2-3 Installing the Stand for the Wall Mount This product provides a stand mount of 100 mm x 100 mm / 100 mm x 200 mm(3.9 x 3.9 inches / 3.9 x 7.9 inches) that complies with the VESA specifications. HAS stand Stand Mount Stand (Optional) 1. Turn the product off and unplug the power cord from the wall outlet. 2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product down on the cloth so that the front of the product faces downwards. 3. Separate the stand. 4.
Summary of the content on the page No. 16
2-4 Connecting with a PC The connecting part may differ depending on the product model. 1. Connect the product to a PC depending on the video output supported by the PC. • When the graphics card provides D-Sub Analog output • Connect the [RGB IN] port of the product to the [D-Sub] port of the PC with the D-Sub cable. • When the graphics card provides DVI Digital output • Connect the [DVI IN] port of the product to the [DVI] port of the PC with the DVI cable. The [DVI IN] terminal is supp
Summary of the content on the page No. 17
Switches the Power On/Off. When the product is connected to a PC, you can turn the product on and use it. 3. Connect the [AUDIO IN] port on the rear side of the monitor to the sound card of the PC. Connect your headphones to the Headphone connection terminal. Applicable to the models that have speakers only. Installing the Product 2-4
Summary of the content on the page No. 18
2-5 Fixing cables Cables can be fixed as shown. 2-5 Installing the Product
Summary of the content on the page No. 19
2-6 Speaker You can hear sound by connecting the soundcard of your PC to the monitor. Applicable to the models that have speakers only. Installing the Product 2-6
Summary of the content on the page No. 20
2-7 Kensington Lock A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations. Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information, refer to the User Manual supplied with the locking device for more information. You must purchase the Kensington Lock separately. To lock the product, follow these steps: 1. Wrap the Kensington lock cable around a
