Summary of the content on the page No. 1
Operating Instructions
Thank you very much for purchasing this PIONEER product.
Before using your Plasma Display, please carefully read the
“Important Information” and these “Operating Instructions” so
you will know how to operate the Plasma Display properly.
Keep this manual in a safe place. You will find it useful in the
future.
Notes on Installation Work:
This product is marketed assuming that it is installed by qualified
personnel with enough skill and competence. Always have an
installation
Summary of the content on the page No. 2
Important Information static image over a prolonged period of time, can result in Precautions Warnings and Safety Precaution NOTE: phosphor burn if proper precautions are not taken. To protect Please read this manual carefully before using your plasma This plasma monitor is designed and When you connect a computer to this monitor, use an RGB your investment in this plasma monitor, please adhere to the monitor and keep the manual handy for future reference. manufactured to provide long, trouble-f
Summary of the content on the page No. 3
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment IMPORTANT NOTICE The serial number for this equipment is located on the 1. Read these instructions. 16. Tilt/Stability - All televisions must comply with rear panel. Please write this serial number on your en- 2. Keep these instructions. recommended international global safety standards for closed waranty card and keep in a secure place. This is 3. Heed all warnings. tilt and stability properties of its cabinets design. 4. Follow all
Summary of the content on the page No. 4
Contents Installation ...................................................... 2 Setting the black level for HDMI signal ..................... 20 Setting the video signal format ................................... 20 Ventilation Requirements for enclosure mounting .......... 2 Setting the background color when no signal is being How to use the safety metal fittings and the screws for input ........................................................................ 20 safety metal fittings............
Summary of the content on the page No. 5
Installation You can attach your optional mounts or stand to the plasma monitor in one of the following two ways: Operating Range Cable Management * While it is upright. (See Drawing A) * Use the remote control within a distance of about 7 m/ Using the cable clamps provided with the plasma display, * As it is laid down with the screen face down (See Drawing B). Lay the protective sheet, which was wrapped around the 23ft. from the front of the monitor’s remote control sensor bundle at the back of
Summary of the content on the page No. 6
Part Names and Function Front View Rear View/ Terminal Board A AC IN F PC2/ COMPONENT2 Connect the included power cord here. PC2: You can connect an analog RGB signal and the syncronization signal. B EXT SPEAKER L and R COMPONENT2: You can connect DVDs, High Connect speakers (optional) here. Maintain the correct Definition sources, Laser Discs, etc. polarity. Connect the (positive) speaker wire to the here. q Power ( ) t and EXT SPEAKER terminal and the (negative) This input can be se
Summary of the content on the page No. 7
Basic Operations i MUTING Remote Control POWER OFF TIMER Mutes the sound. To turn the unit ON and OFF: To set the off timer: o VOLUME (+ /–) The off timer can be set to turn the power off after 30, 60, 1. Plug the power cord into an active AC power outlet. Adjusts the sound volume. 90 or 120 minutes. 2. Press the Power button (on the unit). 1. Press the OFF TIMER button to start the timer at 30 !0 ZOOM (+ /–) The monitor’s STANDBY/ON indicator turns red and minutes. Enlarges or reduces the image
Summary of the content on the page No. 8
WIDE Operations The picture is expanded in the horizontal and vertical SCREEN SIZE Operation (manual) SCREEN SIZE Operation with Information direction, maintaining the original proportions. With this function, you can select one of six screen sizes. Computer Signals Supported resolution * Use this for theater size (wide) movies, etc. Switch to the wide screen mode to expand the 4 : 3 image See page 27 for details on the display output of the When viewing videos or digital video discs to fill t
Summary of the content on the page No. 9
SPLIT SCREEN Operations Operations in the Side-by-side mode Operations in the Picture-in-picture mode Selecting the input signals to be displayed Showing a couple of pictures on the 1. Press the ACTIVE SELECT button to make the desired screen at the same time To change the picture size, press the cursor or To move the position of the sub screen, press the cursor picture active. button. or button. * A PC-input picture may not be displayed in these modes, 2. Press the PC1, VIDEO1
Summary of the content on the page No. 10
OSD (On Screen Display) Controls Menu Operations Setting the language for the menus Menu Tree The following describes how to use the menus and the The menu display can be set to one of seven languages. :Shaded areas indicate the default value. selected items. Example: Setting the menu display to “DEUTSCH”
←→: Press the or button to adjust. 1. Press the MENU/SET button on the remote control to On “LANGUAGE” of “SET UP” menu, select “DEUTSCH”. Main menu Sub menu Sub menu 2 Sub men
Summary of the content on the page No. 11
Adjusting the picture Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET REFERENCE Picture Settings Menu The contrast, brightness, sharpness, color and tint can be FUNCTION POWER MGT. ON←→OFF YES 22 Storing picture settings adjusted as desired. INPUT SKIP ON←→OFF YES 22 This function allows you to store in memory the current SUB. P DETECT AUTO←→OFF YES 22 Example: Adjusting the contrast input signal and PICTURE menu settings and to recall ZOOM NAV OFF←→S BY S←→BTM LFT←→BTM RGT←→TOP RGT←→T
Summary of the content on the page No. 12
Setting the color temperature Changing the Gamma Curve Adjusting the pedestal level (black level) Setting the picture to suit the movie Use this procedure to set color tone produced by the plasma This feature adjusts the brightness of the midtone areas This feature adjusts the video black level in a video image. The film image is automatically discriminated and display. while keeping shadows and highlights unchanged. projected in an image mode suited to the picture. Example: Setting “3.75” [NTSC
Summary of the content on the page No. 13
Setting high definition images to the suitable SOUND Settings Menu SCREEN Settings Menu SET UP Settings Menu screen size Adjusting the treble, bass and left/right Adjusting the Position, Size, PHASE, CLOCK Setting the BNC connectors Use this procedure to set whether the number of vertical balance and audio input select The position of the image can be adjusted and flickering Select whether to set the input of the 5 BNC connectors to lines of the input high definition image is 1080I or 1035I The
Summary of the content on the page No. 14
Setting the video signal format Setting the gray level for the SIDE MASK Information Information Use these operations to set the color systems of composite Use this procedure to set the gray level for the parts on the RGB SELECT modes DISPLAY OSD settings video signals or Y/C input signals. screen on which nothing is displayed when the screen is One of these 8 modes must be selected in order to ON: The informations on screen size, volume control, set to the 4:3 size. Example: Setting the col
Summary of the content on the page No. 15
FUNCTION Setting the Input Skip Displaying the entire image during DIGITAL Function Settings Menu POWER MGT. : OFF When this is ON, signals which are not present will be ZOOM operations INPUT SKIP : OFF Setting the power management for computer SUB. P DETECT : AUTO skipped over and only pictures whose signals are being Use this function to display the entire image within the ZOOM NAV : BTM LEFT images PICTURE FREEZE : BTM LEFT transmitted will be displayed. sub screen together with an enla
Summary of the content on the page No. 16
INVERSE/WHITE OSD ORBITER Signal Information Menu Information Use this to set the inverse mode or to display a white screen. Use this to set OSD menu shift. Checking the frequencies, polarities of input When set to AUTO signals, and resolution Example: Setting “INVERSE/WHITE” to “WHITE” Example: Setting “OSD ORBITER” to “OFF” Set automatically, as described below. Use this function to check the frequencies and polarities ABL: 100 On “INVERSE/WHITE” of “LONG LIFE” menu, select On “OSD ORBITER”
Summary of the content on the page No. 17
Pin Assignments Table of Signals Supported Supported resolution mini D-Sub 15-pin connector 2, 3, 4 • When the screen size is 4:3, each signal is converted to a 1024 dots768 lines signal. (Except for * ) (Analog) • When the screen size is D BY D, the picture is displayed in the original resolution. 3 • When the screen size is FULL, each signal is converted to a 1365 dots768 lines signal. (Except for * ) PC 1 Computer input signals supported by this system Horizontal Sync Polarity Presence Scr
Summary of the content on the page No. 18
Troubleshooting *1 Only when using a graphic accelerator board that is capable of displaying 852480. If the picture quality is poor or there is some other problem, check the adjustments, operations, etc., before requesting service. *2 This signal is converted to a 1024 dots 640 lines signal. Symptom Checks Remedy *3 The picture is displayed in the original resolution. Mechanical sound is heard. • Maybe the sound from the cooling fans used to prevent over heating. *4 The aspect ratio is 5:4. T
Summary of the content on the page No. 19
Specifications Screen Size 53.2"(H)29.9"(V) inches 1351(H)760(V) mm diagonal 61" Aspect Ratio 16 : 9 Resolution 1365(H)768(V) pixels Signals Synchronization Range Horizontal : 15.8 to 110 kHz (automatic : step scan) Vertical : 59.8 to 120 Hz (automatic : step scan) Input Signals RGB, NTSC (3.58/4.43), PAL (B,G,M,N), 1 1 1 PAL60, SECAM, HD* , DVD* , DTV* Input Terminals PC Visual 1 (Analog) mini D-sub 15-pin1 2 Visual 2 (Analog) BNC (R, G, B, H/CS, V)1* Video Visual 1 BNC1 Visual 2 RCA-pin
