Summary of the content on the page No. 1
Hospitality Television
42HF9320A
Summary of the content on the page No. 2
Installation of your Philips Hotel TV 1. Introduction This addendum has been designed to help you install programmes on this Digital TV and activating the hotel mode. Use this addendum in conjunction with the User Manual of this television. Please handle the TV with care and wipe with a soft cloth to ensure your TV keeps looking new. 2. The benefits of the Philips hotel TV This TV is specially designed for hotels. The Philips hotel TV offers all kind of featur
Summary of the content on the page No. 3
Installing Analogue Programs Ensure the TV is in Analogue mode. If it is in Digital mode, press the A/D (Analogue/Digital) key on the Remote Control to enter the Analogue mode. 1. Press the (Menu TV) key on the Remote Control 2. Press the Up/Down Arrow Key to scroll to the item called INSTALL and press OK 3. Press the Up/Down Arrow Key to scroll to the item AUTO STORE and press OK The TV will now start to scan and install all available (Analogue) TV channels automatically. This
Summary of the content on the page No. 4
OFF BDS Hotel Mode is OFF: The TV operates as a normal consumer TV SWITCH ON VOL When the user switches the TV ON, it will play at the specified volume level. There are 2 options: LAST STATUS Upon start-up, the TV volume will be set to the level before the TV set was last turned off. USER DEFINED As specified by installer Remark: “SWITCH ON VOL” cannot exceed the MAXIMUM VOL level. This is the volume level with which the Hotel Mode Setup menu was entered. MAXIMUM VOL T
Summary of the content on the page No. 5
HIGH SECURITY MODE ON Allows access to the BDS Hotel Mode Setup Menu via the special BDS Setup Remote only. (RC2573/01) OFF Allows access to the BDS Hotel Mode Setup Menu via BDS Setup Remote or via normal Remote Control (using special key code sequence). AUTO SCART The Auto Scart function enables auto-detection of AV devices that are connected to the TV’s Scart connector. ON Enables Auto Scart switching in BDS Hotel Mode. OFF Disables Auto Scart switching in BDS Hotel Mode. M
Summary of the content on the page No. 6
The Philips SmartLoader works in 2 modes – Wireless and Wired: Wireless mode ---- through infrared sensor (15/20HF5234) Switch the SmartLoader to “Wireless” mode by sliding the side-switch to the icon on the SmartLoader device. Point the Wireless SmartLoader to the TV’s infrared receiver (optimal distance of 5-30cm) and proceed with the Installation procedure listed below. Wired mode ---- using the by-packed accessory cable(s) (20/26/32HF5335D) Switch the SmartLoader to “Wired” mo
Summary of the content on the page No. 7
a) Wireless method Set the SmartLoader to “Wireless” mode using the side switch. Turn on the TV, and while holding the SmartLoader, point it in the direction of the TV. Press the “MENU” Key on the SmartLoader. b) Wired method Connect the SmartLoader to the TV using the appropriate accessory cable. Set the SmartLoader to “Wired” mode using the side switch. Turn on the TV, and while holding the SmartLoader, point it in the direction of the TV. Press the “MENU” K
Summary of the content on the page No. 8
Disposal of your old product. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 22002/96/EC. Please find out more about the separate collection system for electrical and electronic products in your local neighborhood. Please act according to your local rules and do not dispose of your old
Summary of the content on the page No. 9
2675.1 eng 03-08-2007 14:51 Pagina 1 Table of contents 7 Connections (DVD, receiver, ...) 37 1 Important 3 7.1 Connections overview 37 1.1 Safety 3 7.2 About connecting 38 1.2 Care of the screen 3 7.3 Connect your devices 40 1.3 Recycling 3 7.4 Connections setup 44 7.5 Preparing for digital services 45 2Your TV 4 2.1 Television overview 4 2.2 Product highlights 5 8Technical data 46 9Troubleshooting 47 3 Getting started 5 3.1 Position the TV 5 3.2 Wall mounting - VESA 5 10 I
Summary of the content on the page No. 10
2675.1 eng 03-08-2007 14:51 Pagina 2 2007 © Koninklijke Philips Electronics Open source software Mains fuse (UK only) N.V. All rights reserved. Specifications This television contains open source This TV is fitted with an approved are subject to change without notice. software. Philips hereby offers to deliver moulded plug. Should it become Trademarks are the property of or make available, upon request, for a necessary to replace the mains fuse, this Koninklijke Philips Electronics N.V. or ch
Summary of the content on the page No. 11
2675.1 eng 03-08-2007 14:51 Pagina 3 • Stationary images Avoid stationary images as much as possible. If 1 Important you can not, reduce screen contrast and brightness to prevent damage to the screen. Read this user manual before you start to use this Stationary images are images that remain on the product. screen for a long time. Examples of stationary images are: on screen menus, teletext pages, black Pay attention to this section and closely follow the bars, stock market information,TV cha
Summary of the content on the page No. 12
VOLUME MENU PROGRAM/CHANNEL 2675.1 eng 03-08-2007 14:51 Pagina 4 2Your TV This section gives you an overview of the controls and functions of this TV. Remote control 2.1 Television overview Side controls B 1 INPUT 1 v 2 TV DVD STB HTS 2 DEMO 3 GUIDE OPTION a 3 OK 4 LIST B 5-6 4 1Volume up and down MENU b BROWSE 5 2 Menu 6 3 Program or Channel up and down + + 4Power switch ¬ - - 5 Led indicator (Blue: On; Red: Standby) V P 7 6 Remote control sensor 8 123 Side connectors
Summary of the content on the page No. 13
2675.1 eng 03-08-2007 14:51 Pagina 5 2.2 Product highlights 3 Getting started Your new TV is equipped with some of the most modern audio or video innovations. This section helps you with the positioning and the Your TV offers the following advantages ... first time installation of the TV. Full High Definition LCD display A full HD resolution of 1920x1080p, the highest 3.1 Position the TV resolution of HD sources. It offers a brilliant flicker- free progressive scan picture with optimum ) Warn
Summary of the content on the page No. 14
2675.1 eng 03-08-2007 14:51 Pagina 6 3.2 Wall mounting 3.2.2 Mounting the wall mount bracket You can wall mount the TV with the supplied wall ) Caution mount bracket. Wall mounting the TV requires special skills that should only be performed by qualified personnel. Wall mounting the TV should meet safety standards according to the TV’s weight. 3.2.1 Unmounting the TV stand Koninklijke Philips Electronics N.V. bears no The TV stand should be unmounted from the TV to responsibility for improp
Summary of the content on the page No. 15
2675.1 eng 03-08-2007 14:51 Pagina 7 † Mount the 2 spacers on the 2 lo wer discs ‹Connect all cables. at the back of the TV. See section 7 Connections. ≈Lift the TV into the wall mount bracket. º Calculate your TV’s ideal position. 1 1121 121mm 42" 260,5 mm 2 30kg ÚSecure the TV in the bracket by screwing in the 2 already fitted screws . ◊Position and level the wall mount bracket and fix the bracket firmly to the wall. Your TV 7 715mm 79 mm ENGLISH
Summary of the content on the page No. 16
2675.1 eng 03-08-2007 14:51 Pagina 8 3.2.3 VESA compliant mounting ) Caution Use a VESA compliant bracket that meets safety standards according to the TV’s weight. Closely follow the instructions that come with your VESA compliant bracket to mount the TV. Koninklijke Philips Electronics N.V. bears no responsibility for improper mounting or mounting that results in accident or injury. The TV is prepared for VESA compliant mounting. This bracket is not included. Use a VESA compliant bracket wit
Summary of the content on the page No. 17
2675.1 eng 03-08-2007 14:51 Pagina 9 3.3 Remote control batteries 3.5 Connect the mains cord ‡ Verify that your mains voltage corresponds with the voltage printed on the sticker at the back of the TV. Do not insert the mains cord if the voltage is different. ® Insert the mains cord tightly. ‡ Open the battery cover on the back of the remote control. ® Insert the 3 batteries supplied (Type AAA- LR03-1,5V). Make sure the + and - ends of the batteries line up correctly (inside of case is marked.
Summary of the content on the page No. 18
2675.1 eng 03-08-2007 14:51 Pagina 10 4.1 Switch on or off - Standby 4 Use your TV To switch on the TV: Learn how to operate your TV for daily use. • Press B Power at the right side of the TV if the standby led is off. • Press B on the remote control if the standby led in on. To switch to standby: • Press B on the remote control. To switch on from standby without remote control: • Press B Power at the side of the TV to switch off first and press B Power again to switch on. B B INPUT v TV DVD
Summary of the content on the page No. 19
2675.1 eng 03-08-2007 14:51 Pagina 11 4.2 Watch TV 4.3 Watch channels from a digital receiver 4.2.1 Switch channels ‡ Switch on the digital receiver. ‡ To switch TV channels: The picture from your receiver might appear • Press a number (1 to 999) or press P+ or P- automatically on your screen. on your remote control. ® Use the remote control of your digital receiver • Press Program/Channel - or + on the side to select TV channels. controls of the TV. ® Press R to return to the previously view
Summary of the content on the page No. 20
2675.1 eng 03-08-2007 14:51 Pagina 12 4.5 Watch a DVD 4.6 Select a Teletext page ‡ Insert a DVD disc in your player. Most TV channels broadcast information via ® Press Play π. Teletext. The picture from your player appears To watch Teletext: automatically on your screen. ‡ Press b. The main index page appears. LIST If the picture does not appear: ‡ Press v on the remote control. MENU b B b BROWSE INPUT INPUT + + v v ¬ TV DVD STB HTS - - V P DEMO GUIDE OPTION a ® To select a page of your choi
