Crimestopper Security Products SV-6910 user manual

Summary of the content on the page No. 1

SV-6910 Color Camera
Installation Manual

FEATURES:
l High Resolution Color Camera
l Compact Zinc Alloy Die Cast Body
l Waterproof Housing
l Adjustable Mounting Angle
l Wide Angle Lens
l Infrared LED for Night Vision
l Reverse Image Selectable

Summary of the content on the page No. 2

Figure 1 Camera Installation 1 (Viewing angle is adjustable) 1

Summary of the content on the page No. 3

Figure 2 Installation 1: 1. Locate a suitable mounting location at rear of vehicle. 2. Use the supplied bracket to mark the mounting hole locations. 3. Drill two 3/16” holes for mounting hardware you are using. Drill a 11/16” hole in the cable location. Route the cable into the vehicle and then insert the Grommet to prevent water from pouring in. 4. Attach the camera-mounting bracket to the vehicle with the lens shroud on topside. If lens shroud is on the bottom, then the c

Summary of the content on the page No. 4

Figure 3 Installation 2: 1. Locate a suitable mounting location at rear of vehicle. 2. Use the camera backplate to mark the mounting hole locations. 3. Drill two 3/16” holes for mounting hardware you are using. 4. Use screws to attach the camera backboard to the vehicle with the lens shroud on topside. 5. Route the camera cable towards display monitor. 6. Connect the camera cable to monitor. 7. Select camera image normal or mirror image by reverse image jumper. (Figure 1) Specific

Summary of the content on the page No. 5

www.crimestopper.com Phone (800) 998-6880 FAX (805) 581-9500 © 2007Crimestopper Security Products ver 04/25/07 4