Summary of the content on the page No. 1
Operating Instructions
High Defi nition Plasma Display
Model No.
TH-103PF10UK
The illustration shown is an image.
Before connecting, operating or adjusting this product, please read these instructions completely.
Please keep this manual for future reference.
English
TQBC2243
Summary of the content on the page No. 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualifi ed service personnel. The lightning flash with The exclamation point within arrow-head within a triangle a triangle is intended to is in tend ed to tell the user tell the user that important that parts inside the product operating and servicing are a risk of electric shock instructions are in the papers to per sons
Summary of the content on the page No. 3
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi ers) that produce heat. 9) Do not defeat the safety purpose o
Summary of the content on the page No. 4
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt as well, and record the model number and serial number of your set in the space provided on the rear cover of these instructions. Table of Contents Important Safety Instruction
Summary of the content on the page No. 5
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee tha
Summary of the content on the page No. 6
Safety Precautions CAUTION This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.) • Pedestal ..................................................................... TY-ST103PF9 • Wall-hanging bracket (vertical) ................................... TY-WK103PV9
Summary of the content on the page No. 7
Safety Precautions / Maintenance WARNING Securely insert the power cord plug as far as it will go. Setup • If the plug is not fully inserted, heat may be generated Do not place the Plasma Display on sloped or unstable which could cause fi re. If the plug is damaged or the surfaces. wall socket plate is loose, they should not be used. • The Plasma Display may fall off or tip over. Do not place any objects on top of the Plasma Do not handle the power cord plug with wet hands. Display. • Doing
Summary of the content on the page No. 8
Accessories Accessories Supplied Check that you have the Accessories and items shown Operating Remote Control Batteries for the Fixing bands × 2 Instruction book Transmitter Remote Control EUR7636070R Transmitter (2 × AA Size) AC cord Allen wrench Eyebolt cap × 3 Remote Control Batteries Requires two AA batteries. 1. Pull and hold the hook, then 2. Insert batteries - note correct 3. Replace the cover. open the battery cover. polarity ( + and -). + - + - “AA” size Helpful Hint: For frequent re
Summary of the content on the page No. 9
Connections AUDIO OUT Terminals connection R L Speakers (Optional accessories) AUDIO OUT Stereophonic sound code audio equipment AC cord connection (see page 13) AC cord connection (see page 13) line-in – AC cord fi xing Unplug the AC cord Close Close Push until the hook clicks. Unplug the 1 Plug the AC cord into AC cord Open Open the display unit. pressing the 2. Pull off. Plug the AC cord until two knobs. Note: it clicks. Note: Make sure that the 1. Keep the When disconnecting the
Summary of the content on the page No. 10
Connections PC Input Terminals connection COMPUTER AUDIO PC IN Conversion adapter (if necessary) Mini D-sub 15p RGB PC cable Audio Stereo plug Connect a cable which matches the audio output terminal on the computer. Notes: • Due to space limitations, occasionally you may have trouble connecting Mini D-sub 15P cable with ferrite core to PC input Terminal. • Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 4
Summary of the content on the page No. 11
Connections SERIAL Terminals connection The SERIAL terminal is used when the Plasma Display is controlled by a computer. COMPUTER 13 2 45 67 8 9 SERIAL RS-232C Straight cable Pin layout for SERIAL Terminal D-sub 9p Notes: • Use the RS-232C cable to connect the computer to the Plasma Display. • The computer shown is for example purposes only. • Additional equipment and cables shown are not supplied with this set. The SERIAL terminal conforms to the RS-232C interface specifi cation, so that the P
Summary of the content on the page No. 12
Connections HDMI connection This unit has terminal boards equivalent to Dual HDMI Terminal Board (TY-FB10HMD) and BNC Component Video Terminal Board (TY-42TM6A) as standard equipment. [Pin assignments and signal names] Pin No. Signal Pin No. Signal T.M.D.S Clock 1 T.M.D.S Data2+ 11 Shield T.M.D.S Data2 2 12 T.M.D.S Clock- Shield RL AUDIO PR/CR/R PB/CB/B Y/G 3 13 T.M.D.S Data2- CEC COMPONENT/RGB IN 4 T.M.D.S Data1+ Reserved SLOT1 SLOT2 SLOT3 PC 14 T.M.D.S Data1 5 (N.C. on device) Shield
Summary of the content on the page No. 13
Power ON / OFF Connecting the AC cord plug to the Plasma Display. Fix the AC cord plug securely to the Plasma Display with the clamper. (see page 9) Connecting the plug to the Wall Outlet. Note: When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet fi rst. Right side surface Press the Power switch on the Plasma Display to turn the set on: Power-On. Main Power Power Indicator: Green On / Off Switch Example: The screen below is displayed for a
Summary of the content on the page No. 14
Basic Controls Main Unit Right side Enter / Aspect button surface (see page 16, 19) Volume Adjustment ENTER/ Volume Up “+” Down “–” When the menu screen is displayed: + / “+” : press to move the cursor up VOL “–” : press to move the cursor down - / (see page 16) MENU Remote control sensor MENU Screen ON / OFF Power Indicator INPUT Each time the MENU button is pressed, the menu The Power Indicator will light. screen will switch. (see page 16) • Power-OFF ...... Indicator not illuminated (T
Summary of the content on the page No. 15
Basic Controls Remote Control Transmitter Status button R button (see page 17) Press the “Status” button to display Press the R button to return to previous menu screen. the current system status. 1 Input label Standby (ON / OFF) button 2 Aspect mode (see page 19) The Plasma Display must fi rst be plugged into 3 Off timer the wall outlet and turned on at the power switch The off timer indicator is displayed only (see page 13). when the off timer has been set. Press ON to turn the Plasma Dis
Summary of the content on the page No. 16
On-Screen Menu Displays The MENU button on the unit can also be To PICTURE adjust menu 1 Press to select. pressed. - / (see page 24) MENU PICTURE 1/2 Right side surface NORMALIZE NORMAL INPUT PICTURE MENU STANDARD PICTURE 25 Each time the MENU button is pressed, the BRIGHTNESS 0 [ from the unit ] menu screen will switch. COLOR 0 Right side surface TINT 0 Normal Viewing PICTURE SETUP SHARPNESS 5 ENTER/ 2 SOUND POS. /SIZE PICTURE 2/2 + / VOL 1 NORMAL - / COLOR TEMP COLOR MANAGEMENT OFF
Summary of the content on the page No. 17
On-Screen Menu Displays Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting. [ from the unit ] 2 Press to access - / each adjust screen. MENU Right side surface INPUT Press the R button to return to previous menu. Press to return to next menu screen. To SIGNAL screen for VIDEO To SIGNAL screen for To SIGNAL screen for RGB To SIGNAL screen for Digital (S VIDEO) (see page 40-42) COMPONENT (see page 41-43) (see page 41, 42) (s
Summary of the content on the page No. 18
Initial selections Selecting the input signal Select the input signals to be connected by installing the optional Terminal Boards. Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display. Input signals will change as follows: INPUT1 INPUT2A INPUT2B INPUT3 PC SLOT2 is for dual input so that you can select INPUT2A or INPUT2B for INPUT2. INPUT2A : HDMI signal terminal in SLOT2 INPUT2B : HDMI signal terminal in SLOT2 Press the INPUT “1”,
Summary of the content on the page No. 19
ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Press repeatedly to move through the aspect options: NORMAL ZOOM FULL Panasonic AUTO JUST Note: [from the unit] When selecting an input slot that attaches BNC Dual Video Terminal Right side surface Board (TY-FB9BD), Panasonic AUTO cannot be selected. ENTER/ The aspect mode changes each time the ENTER button + / is pressed. VOL - / [During MULTI
Summary of the content on the page No. 20
Adjusting POS. /SIZE 1 Press to display the POS. /SIZE menu. Press to select AUTO SETUP / H-POS / H-SIZE / V-POS / 2 V-SIZE / DOT CLOCK / CLOCK PHASE / 1:1 PIXEL MODE. Press to adjust POS. /SIZE. 3 During “VIDEO (S VIDEO)”, “Digital”, “SDI” and “HDMI” input signal. POS. /SIZE NORMALIZE NORMAL AUTO SETUP 0 H-POS 4 Press to exit from adjust mode. 0 H-SIZE V-POS 0 0 V-SIZE Notes: 1:1 PIXEL MODE OFF • Unadjustable items are grayed out. Adjustable items differ depending on the input signal and the
