Summary of the content on the page No. 1
MATSUI
Instruction Manual
7 Inches 16:9 Widescreen Colour LCD TV
With DVBT
ENTER
MAT7DB2656E
BEFORE USING THIS PRODUCT, READ, UNDERSTAND,
AND FOLLOW THESE INSTRUCTIONS.
Save this booklet for future reference.
Summary of the content on the page No. 2
Summary of the content on the page No. 3
1. IMPORTANT INSTRUCTIONS 10. MAINTENANCE 1-1 SAFETY INSTRUCTIONS Be sure to press POWER to set the TV to the standby mode and disconnect C AU TI ON the AC adaptor before cleaning the TV. RISK OF ELECTRIC SHOCK DO NOT OPEN Wipe witha dry, soft cloth. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. If the surfaces are extremely dirty ,wipe clean witha cloth which has been DO NOT REMOVE COVER (OR BACK). dipped ina weak soap-and-water solution and wrung out thoroughly, and then NO USER SERVICEABLE P
Summary of the content on the page No. 4
CHAPTER 1 IMPORTANT INSTRUCTIONS 9. TROUBLESHOOTING (e.g. airbag, seat belt, etc.) that is fitted. It is advised that this product is installed in the rear of the vehicle only. Make sure that it is always securely fastened before use. Never place the product in a position wherea sudden stop will cause it to become dislodged. Before requesting service for this player ,check the chart below for possible cause of the problem you are experiencing. some simple checks or an adjustment on your part may
Summary of the content on the page No. 5
8. SPECIFICATIONS 2. FEATURES 1.CHANNEL BANDWIDTH:6MHZ, 7MHZ&8MHZ 7” TFT DISPLAY 2. EARPHONE OUTPUT:≥250mW (MAX) This player has a built-in 7" TFT display w, to provide clear vision, and low 3.Display device: Colour TFT LCD radiation. 4.Display Screen Size: 7 inches 5.Video Input: 1Vp-p 6.Audio Output: ≥1.6V+0.2V MANUAL/AUTO TV/ RADIO SEARCHING FUNCTION 7.Input Resistance: 75Ω 8.Power Consumption: ≤18w 9.Standby Power Consumption:≤0.04W MEMORY FUNCTION - 10.Resolution: 1440 (H)*234 (V) 11.Dots D
Summary of the content on the page No. 6
Summary of the content on the page No. 7
CHAPTER 7 OPERATIONS TABLE OF CONTENTS 1 IMPORTANT INSTRUCTION.............................................1-2 2 FEATURES...........................................................................3 3 ACCESSORIES ..................................................................4 Parent Lock 4 GENERAL PARTS AND CONTROLS...................................6-8 If you select and enter the Parent Lock menu ,you can seta lock or modify the password. -If the Parent Lock is set to ON, you must input the
Summary of the content on the page No. 8
CHAPTER7 OPERATIONS 4. GENERAL PARTS AND CONTROLS INFO MAIN UNIT 4-1 Press INFO button once, a banner displays on the top of the screen(press again to remove). The banner will show the details of the current channel. FRONT VIEW 1 10 11 CH ENTER STANDBY 2 V MENU V CH Preference 3 4 5 6 7 8 9 In the Preference menu you can select, Language OSD (ON SCREEN DISPLAY) Setting and Parent Lock items. 1.TFT DISPLAY 6.CH+/ BUTTON-To select next channel 2.SPEAKER or move down. Language 3.ENTER BUTTON -Can b
Summary of the content on the page No. 9
Summary of the content on the page No. 10
CHAPTER4 GENERAL PARTS AND CONTROLS CHAPTER 7 OPERATIONS 16.MENU -Displays the main menu and return to the previous menu. 17. Button -To adjust volume louder or move right. 18.EXIT-To return to parent menu. Pressing this button will also close all menu. 19.FAV -Display the user-settings favorite list 20.red button-To select different options according to the RED button displaying on OSD meun. 21.TEXT-To display current programme information. 22.GUIDE-Display the one-week EPG (electronic programm
Summary of the content on the page No. 11
CHAPTER 7 OPERATIONS 5. BASIC CONNECTION Ensure all the cables are disconnected from the main unit before connecting to the AC power source using the AC power adaptor. Read through the instructions before connecting other equipment. 5-1 CONNECTING TO AC POWER SOURCE To DC IN 12V jack Main unit NOTE: Before connecting to AC power, push the ① Channel type icon, TV or radio To power outlet POWER ON/OFF switch to OFF. ② Current time ③ Channel number and the name of channel ④ Event name AC ad aptor(i
Summary of the content on the page No. 12
CHAPTER 5 BASIC CONNECTION CHAPTER 7 OPERATIONS 5-3 CONNECTING TO EXTERNAL DVD/VCR DVD/VCR TO AV OUT JACK Video/audio cable TO AV IN JACK System Information In Config menu , you can select System Information. The System Information menu shows the system information including the Firmware version and mode name. DVBT PLAYER 5-4 CONNECTING TO TV SET TV set NOTE: Make sure all the connections are right and the equipment set to the correct mode. TO AV IN JACK Playback In play status, various menus wi
Summary of the content on the page No. 13
Summary of the content on the page No. 14
CHAPTER 7 OPERATIONS 7. OPERATION MAKE SURE ALL THE EQUIPMENT AND AC ADAPTOR ARE CONNECTED PROPERLY AND THE UNIT IS SET IN CORRECT MODE BEFORE OPERATION. 7-1 ENTER Config -Connect the external aerial (antenna) to the antenna aerial located on the back of the unit. In the main menu, you can press the left or right button to select the Config icon. In this -Switch the unit to on. menu, you can select Clear Data, TV Setting, Set Time, System Update or System -Press TV /RADIO button to enter TV/ RAD
Summary of the content on the page No. 15
CHAPTER7 OPERATIONS CHAPTER 7 OPERATIONS Auto Search In Scan menu, you can select Auto Searching . You can search all programs with this menu in the default frequency range. Contrast 50 Brightness 50 Hue 50 Saturation 50 Sharpness1 Scaling 16:9 Move the UP or DOWN navigation button to select Contrast, Brightness, Hue, Saturation, Sharpness or Scaling, then press the LEFT or RIGHT navigation button to adjust the level of the selected item. NOTE: The level of Contrast, Brightness, Hue and Saturati
Summary of the content on the page No. 16
CHAPTER7 OPERATIONS CHAPTER 7 OPERATIONS -Select the desired channel by pressing the Up/Down button, and then press the Red button on the remote control to set selected channel as one of favorites. Press the Red button again, the selected channel will be cancelled from your favorite list. -To select Radio channel on the TV list, press the TV/ Radio button on the remote control, and then press the TV /Radio button to select TV channel on the Radio channel list. - Press the MENU button to exit cur
