Summary of the content on the page No. 1
9236521_CK-10_1_en.fm Page 1 Wednesday, November 3, 2004 5:18 PM
Car Kit CK-10
User Guide
Summary of the content on the page No. 2
9236521_CK-10_1_en.fm Page 2 Wednesday, November 3, 2004 5:18 PM DECLARATION OF CONFORMITY We, NOKIA CORPORATION, declare under our sole responsibility that the product HF-7 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at: http://www.nokia.com/phones/declaration_of_conformity/ Copyright © Nokia Corporation 2004. All rights reserved. Reproduction, transfer, distribution or storage of part or all of t
Summary of the content on the page No. 3
9236521_CK-10_1_en.fm Page 3 Wednesday, November 3, 2004 5:18 PM For your safety For your safety Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this user's guide. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety. QUALIFIED INSTALLATION AND SERVICE Only qualified personnel may install or repair this
Summary of the content on the page No. 4
9236521_CK-10_1_en.fm Page 4 Wednesday, November 3, 2004 5:18 PM Introduction Introduction Car kit installation in the cockpit The Nokia CK-10 car kit was developed for installation in motor vehicles. You can operate your mobile in the hands-free mode and charge the phone battery. The car kit is extremely compact, consisting of the hands-free unit and microphone. You can install the car kit quickly and easily. Simply connect the power cable, the loudspeaker, and one of the lines from the
Summary of the content on the page No. 5
9236521_CK-10_1_en.fm Page 5 Wednesday, November 3, 2004 5:18 PM Getting started 1. Getting started ■ Overview The following lists the car kit components (1-7) and optional enhancements (8-12) that may be available to extend your car kit. 1. Hands-free unit HF-7 with built-in microphone 2. Mounting plate HH-8 to mount the hands-free unit 3. Loudspeaker SP-3 4. System cable CA-46 to connect a compatible phone holder to the hands- free unit 5. System cable CA-47 to connect a compatible mobi
Summary of the content on the page No. 6
9236521_CK-10_1_en.fm Page 6 Wednesday, November 3, 2004 5:18 PM Getting started ■ Configuration The CK-10 car kit can be installed in various ways. The following figures give examples of typical installation variants. Before you start the installation, ask for professional advice on the configuration that would best suit your needs. Car kit with passive phone holder Car kit with active phone holder 6
Summary of the content on the page No. 7
9236521_CK-10_1_en.fm Page 7 Wednesday, November 3, 2004 5:18 PM Getting started Car kit with separate antenna coupler and external antenna ■ Use of enhancements Ensure that only compatible products are connected to your car kit. Before you begin the installation, ask for professional advice on the enhancements that would best suit your needs. Microphone (component 8) The hands-free unit HF-7 comes with a built-in high-quality microphone. You can also connect an external microphone (for ex
Summary of the content on the page No. 8
9236521_CK-10_1_en.fm Page 8 Wednesday, November 3, 2004 5:18 PM Getting started Antenna coupler (component 9) You can install a separate antenna coupler (not included in the sales package) to connect an external antenna. A range of antenna couplers may be available for mobile phones and phone holders. An antenna coupler can improve in- vehicle reception of the mobile phone. Please check the compatibility of couplers with the manufacturer. GSM antenna (component 12) A compatible GSM antenna
Summary of the content on the page No. 9
9236521_CK-10_1_en.fm Page 9 Wednesday, November 3, 2004 5:18 PM Installation 2. Installation ■ Safety information Follow these basic safety guidelines when installing the car kit. Note that the instructions in this installation guide are general guidelines which apply for the installation of the Nokia CK-10 car kit in an automobile. Due to the wide variety of car types and models available, this guide cannot consider the individual technical requirements relevant for any particular veh
Summary of the content on the page No. 10
9236521_CK-10_1_en.fm Page 10 Wednesday, November 3, 2004 5:18 PM Installation The car kit should not be installed in the head impact area. Do not wire car kit equipment to the high voltage lines of the ignition system. Take care not to cause damage to electrical cables, fuel or brake lines, or safety equipment during installation work. Ensure cables are placed so that they are not subjected to mechanical wear and tear. Do not place cables under car seats or over sharp edges. ■ Ins
Summary of the content on the page No. 11
9236521_CK-10_1_en.fm Page 11 Wednesday, November 3, 2004 5:18 PM Installation Finally, insert the cover with the Nokia logo into the recess, and press it into place. Fix the mount for the phone holder on the dashboard or to any other location in the cockpit area where the display is clearly visible for the user and the keypad of the mobile phone is within easy reach of the user. Installing the microphone You can position the built-in microphone to point toward the user's mouth: loosen th
Summary of the content on the page No. 12
9236521_CK-10_1_en.fm Page 12 Wednesday, November 3, 2004 5:18 PM Installation Connecting cables to hands-free unit HF-7 Power cable CA-60P Plug the power cable into the corresponding port of the hands-free unit. The wires in the cable harness are to be connected as shown in the wiring diagram. 1. Connect the black wire to the vehicle ground (GND). 2. Connect the yellow wire to the MUTE connection of the car radio. When a call is accepted, the car kit switches the yellow line (MUTE) to gro
Summary of the content on the page No. 13
9236521_CK-10_1_en.fm Page 13 Wednesday, November 3, 2004 5:18 PM Installation Some vehicles do not come with such a possibility. In this case the car kit can be connected to the positive terminal of the 12-V car battery using the 2-A fuse supplied. If the car kit is installed in this way, it stays in service as long as a compatible mobile phone remains in the phone holder. Note: Replace a blown fuse with a fuse of the same type and size. Never use a fuse with a higher rating. System cabl
Summary of the content on the page No. 14
9236521_CK-10_1_en.fm Page 14 Wednesday, November 3, 2004 5:18 PM Usage 3. Usage To switch your car kit on and off, turn the ignition key. If a mobile phone is in the phone holder and connected to the car kit, the indicator light on the built- in microphone turns on to show that the car kit is active. When you disconnect the mobile phone, the indicator light turns off. If the car kit is connected to the car battery directly (i.e. without connection to a suitable 12-V line controlled by the
