Summary of the content on the page No. 1
LCD TV PLASMA TV
OWNER’S MANUAL
LCD TV MODELS PLASMA TV MODELS
32LC7D 42PC5D
32LC7DC 42PC5DC
37LC7D 50PC5D
42LC7D 50PC5DC
Please read this manual carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer
when you require service.
ENERGY STAR is a set of power-saving
guidelines issued by the U.S.
Environmental Protection Agency(EPA).
As an ENERGY STA
Summary of the content on the page No. 2
LG's own special digital image generator, consisting Manufactured under license from Dolby Laboratories. of a full digital image processor, six different main “Dolby “and the double-D symbol are trademarks of picture quality factors. Dolby Laboratories. High-definition television. High-resolution digital is a trademark of SRS Labs, Inc. television broadcast and playback system composed TruSurround XT technology is incorporated under of roughly a million or more pixels, 16:9 aspect-ratio licens
Summary of the content on the page No. 3
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC NOTICE TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO Class B digital device USER SERVICEABLE PARTS INSIDE. REFER TO This equipment has been tested and found to comply QUALIFIED SERVICE PERSONNEL. with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmf
Summary of the content on the page No. 4
Owner Manual Owner Manual Owner Manual Owner Manual Owner Manual Owner Manual Owner Manual Owner Manual Owner Manual Owner Manual Owner Manual Owner Manual Owner Manual Owner Manual Owner Manual O Ow wner M ner Manual anual SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use an
Summary of the content on the page No. 5
Owner Manual Owner Manual Owner Manual Owner Manual Owner Manual Owner Manual Owner Manual Owner Manual Owner Manual Owner Manual Owner Manual Owner Manual Use only with the cart, stand, tripod, bracket, of the appliance, and have the cord replaced 9 or table specified by the manufacturer, or sold with an exact replacement part by an authorized with the apparatus. When a cart is used, use servicer. Protect the power cord from physical caution when moving the cart/apparatus or mechanical abuse, s
Summary of the content on the page No. 6
CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 PICTURE CONTROL SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Picture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 42 Preset Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - EZ Picture - Preset . . . . . . . . . . . . . . . .
Summary of the content on the page No. 7
TIME SETTING Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 - Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 - Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Auto On/Off Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 8
INTRODUCTION FEATURE OF THIS TV cells. A few cell defects will normally occur in the What is a Plasma TV? Plasma TV manufacturing process. Several tiny, minute Using plasma is the best way to achieve flat panel colored dots visible on the screen should be acceptable. displays with excellent image quality and large screen This also occurs in other Plasma TV manufacturers' sizes that are easily viewable. The Plasma TV can be products. The tiny dots appearing does not mean thought of as a descendan
Summary of the content on the page No. 9
PREPARATION EXIT BRIGHT + BRIGHT + VCR STB TIMER TV INPUT INPUT POWER DVD MODE CABLE ENU MENU ENTER ENTER CH VOL MUTE FAV CH 12 3 1 45 6 78 9 4 0 BACK 7 RATIO RATIO TV AUDIO BRIGHT - SIMPLINK SIMPLINK PREPARATION ACCESSORIES Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product. User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standar
Summary of the content on the page No. 10
PREPARATION PREPARATION FRONT PANEL INFORMATION Here shown may be somewhat different from your TV. NOTE: If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a polishing cloth is included with your product, use it). Front Panel Controls Plasma TV Model Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. When the TV is turned on, the indicator blinks green and then illuminates green before the picture is display
Summary of the content on the page No. 11
PREPARATION LCD TV Model CH CHANNEL (D D,E E)Buttons VOL VOLUME (F F,G G)Buttons ENTER Button ENTER MENU MENU Button INPUT INPUT Button POWER Button Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. When the TV is turned on, the indicator blinks green and then illuminates green before the picture is displayed. 9
Summary of the content on the page No. 12
COMPONENT IN AV OUT AV IN 1 COMPONENT IN AV OUT AV IN 1 PREPARATION PREPARATION BACK PANEL INFORMATION Here shown may be somewhat different from your TV. Back Connection Panel Plasma TV Model AV IN 2 12 11 7 10 SERVICE AUDIO VIDEO RGB IN (PC) 1 6 4 HDMI IN 8 AUDIO IN REMOTE (RGB/DVI) CONTROL IN 2 ANTENNA/ CABLE IN 2 1 ( ) OPTICAL 3 (MONO ) RS-232C IN DIGITAL AUDIO S-VIDEO VIDEO AUDIO HDMI/DVI IN (CONTROL & SERVICE) OUT 9 5 LCD TV Model S-VIDEO 12 11 AV IN 2 7 10 SERVICE
Summary of the content on the page No. 13
PREPARATION 1 COMPONENT IN 11 Power Cord Socket Connect a component video/audio device to these For operation with AC power. jacks. Caution: Never attempt to operate the TV on DC power. 2 AV OUT Connect a second TV or monitor. 12 AV (Audio/Video) IN 2 Connect audio/video output from an external 3 AV (Audio/Video) IN 1 device to these jacks. Connect audio/video output from an external S-VIDEO device to these jacks. Connect S-Video out from an S-VIDEO device. S-VIDEO Connect S-Video out fro
Summary of the content on the page No. 14
PREPARATION PREPARATION BACK COVER FOR WIRE ARRANGEMENT Here shown may be somewhat different from your TV. Plasma TV Model Hold the CABLE MANAGEMENT with both hands and pull it backward as shown. 1 CABLE MANAGEMENT Connect the cables as necessary. 2 To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Install the CABLE MANAGEMENT as shown. 3 12
Summary of the content on the page No. 15
PREPARATION LCD TV Model Connect the cables as necessary. 1 To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Install the CABLE MANAGEMENT as shown. 2 CABLE MANAGEMENT Bundle the cables using the supplied TWIST 3 HOLDER. ! NOTE Do not hold the CABLE MANAGEMENT when moving G G the product. TWIST HOLDER - If the product is dropped, you may be injured or the product may be broken. How to remove the CABLE MANAGEMENT G G Hold the CABLE MANAGEMENT with both hands and pull i
Summary of the content on the page No. 16
PREPARATION PREPARATION ATTACHING THE TV TO A WALL Here shown may be somewhat different from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV. Plasma TV Model LCD TV Model Insert the eye-bolts (or TV br
Summary of the content on the page No. 17
PREPARATION STAND INSTALLATION (Only 32/37 inches LCD TV models) Carefully place the product screen side down on 1 a cushioned surface that will protect product and screen from damage. Assemble the product stand with the product as 2 shown. Securely install the 4 bolts provided. 3 15
Summary of the content on the page No. 18
PREPARATION PREPARATION VESA WALL MOUNTING This product accepts a VESA-compliant mounting interface pad. (optional) There 4 threaded holes are available for attaching the bracket. Plasma TV Model LCD TV Model 600 mm 600 mm (32 inches only: 200 mm) 400 mm 400 mm (32 inches only: 100 mm) ! NOTE Screw length needed depends on the wall mount used. For further information, refer to the VESA G G Wall Mounting Instruction Guide. ( ) ( ) DESKTOP PEDESTAL INSTALLATION For proper ven
Summary of the content on the page No. 19
PREPARATION ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments Wall (Connect to wall antenna socket) Antenna Socket ANTENNA/ CABLE IN ( ) ( ) RF Coaxial Wire (75 ohm) Outdoor ( ) Antenna Single-family Dwellings /Houses (VHF, UHF) Copper Wire (Connect to wall jack for outdoor antenna) Be
Summary of the content on the page No. 20
COMPONENT IN AV OUT AV IN 1 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. This part of EXTERNAL EQUIPMENT SETUP mainly use picture for LCD TV model. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the
