Summary of the content on the page No. 1
Please read this operating guide carefully before
using the Monitor.
Keep the operating guide with the Monitor.
For future reference, write down the serial number
on the back of the Monitor in the space provided
P60W26
below.
P60W26A
Model number :
Serial number :
OWNER’S MANUAL
P/NO : 3828VA0277V
(NP00KB)
206-03784
INPUT
ON/OFF
SELECT VOLUME
PLASMA DISPLAY PANEL
PLASMA DISPLAY PANEL
Summary of the content on the page No. 2
The PDP Manufacturing Process: Why colored dots may be present on the PDP screen The PDP (Plasma Display Panel) which is the display device of this product is composed of 0.9 to 2.2 mil- lion cells. A few cell defects will normally occur in the PDP manufacturing process. Several colored dots visible on the screen should be acceptable. This also occurs in other PDP manufacturers' products and the dots appearing does not mean that this PDP is defective. Thus a few cell defects are not sufficient c
Summary of the content on the page No. 3
Table of Contents First step WARNINGS ..............................................................4 SAFETY INSTRUCTIONS........................................5 Monitor Overview Front Panel Controls ................................................8 Connection Panel Overview .....................................9 Remote Control Key Functions/Accessories..........10 Monitor Installation .................................................12 Equipment Connections and Setup VCR Setup.................
Summary of the content on the page No. 4
WARNINGS WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to consti- tute a risk of electric shock to persons. The exclamation
Summary of the content on the page No. 5
Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others SAFETY INSTRUCTIONS Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your
Summary of the content on the page No. 6
SAFETY INSTRUCTIONS (Continued from previous page) The openings should never be blocked by in wire to an antenna discharge unit, size of placing the product on a bed, sofa, rug, or grounding conductors, location of antenna- other similar surface. This product should discharge unit, connection to grounding not be placed in a built-in installation such electrodes, and requirements for the as a bookcase or rack unless proper ventila- grounding electrode. tion is provided or the manufacturer’s instr
Summary of the content on the page No. 7
Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others product through openings as they may 22. Safety Check touch dangerous voltage points or short-out Upon completion of any service or repairs to parts that could result in a fire or electric this product, ask the service technician to shock. Never spill liquid of any kind on the perform safety checks to determine that the product. product is in proper operating condition. 19. Servic
Summary of the content on the page No. 8
Front Panel Controls Front Panel Controls ON/OFF INPUT ON/OFF SELECT VOLUME Main power button Power standby indicator Illuminates red in standby INPUT mode, Illuminates green SELECT VOLUME when the Monitor is turned on INPUT SELECT button Sub power button VOLUME (F F,G G) buttons Remote control sensor 8
Summary of the content on the page No. 9
Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others Connection Panel Overview Back Panel (MONO) (+) R ( ) ( ) L (+) RL AUDIO VIDEO Y PBR P RL AUDIO RGB-PC INPUT (VGA/SVGA/XGA/SXGA) AV INPUT S-VIDEO COMPONENT AUDIO INPUT RS-232C EXTERNAL SPEAKER (8Ω ) AC INPUT (480i/480p/720p/1080i) RGB-DTV INPUT (480p/720p/1080i) (DVD/DTV INPUT) (+)RL ( ) ( ) (+) YPB PR RL AUDIO (MONO)VIDEO R AUDIO L RGB-PC INPUT COMPONENT (VGA/SVGA/XGA/SXGA) A
Summary of the content on the page No. 10
Remote Control Key Functions/Accessories - When using the remote control aim it at the remote control sensor on the Monitor. power on button power on system off sleep button (Refer to p. 35) sleep mute mute button switches the sound on or off. 2 13 5 46 number buttons 8 79 video/pc menu 0 video/pc button up enter vol vol down pip twin picture pip button (Refer to p. 26) input select freeze position input select button (Refer to p. 27, 30) ratio easy sound apc ratio button (Refer to p. 46) When p
Summary of the content on the page No. 11
Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others video/pc button on the remote control Each press of this button changes the mode as shown below. system off button (Refer to p.32) VIDEO S-VIDEO Not functional COMPONENT RGB menu button enter button up/down buttons vol buttons twin picture button (Refer to p. 29) When pressed displays DW on screen. position button (Refer to p. 27) freeze button (Refer to p. 42) easy sound button (
Summary of the content on the page No. 12
Monitor Installation - It is recommended that this product only be used at an altitude of less than 6562 feet (2000m) to get the best quality picture and sound. - This plasma display is designed to be mounted horizontally (wide viewing). - Your P60W26, P60W26A (Monitor) can be installed on a wall as shown below, or on a desktop pedestal as shown on the next page. Wall mount and stands are optional, and are not supplied with the monitor. Wall Mount Installation • The m
Summary of the content on the page No. 13
Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others Desktop Pedestal Installation INPUT ON/OFF SELECT VOLUME • The Monitor can be installed on a desk as shown above. (For further information, refer to the optional ‘Desktop Stand Installation and Setup Guide’.) • Speakers shown are optional, and shown for illustration only. b. 4inch 1.18inch ( Pedestal mount minimum allowable clearances for adequate ventilation ) 4inch 4inch 2.36i
Summary of the content on the page No. 14
VCR Setup - As shown below, when connecting the Monitor to a VCR, match the colors of AV input jacks on the Monitor with the output jacks on the VCR: Video = yellow, Audio (Left) = white, Audio (Right) = red. - If you have a mono VCR, connect the audio cable from the VCR to the AUDIO(L/MONO) input of the Plasma Monitor. - If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved, compared to connecting a regular VCR to the Video input. - Avoid having a fixed image rem
Summary of the content on the page No. 15
Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others RL AUDIO (MONO) VIDEO Y PBR P RL (+) R ( ) ( ) L (+) AUDIO (VGA/SVGA/XGA/SXGA) RGB-PC INPUT AV INPUT S-VIDEO (480i/480p/720p/1080i) COMPONENT RGB-DTV INPUT AUDIO INPUT RS-232C EXTERNAL SPEAKER (8Ω ) AC INPUT (DVD/DTV INPUT) (480p/720p/1080i) (+)RL ( ) ( ) (+) RL (MONO) YPB PR AUDIO VIDEO R AUDIO L RGB-PC INPUT COMPONENT (VGA/SVGA/XGA/SXGA) AUDIO INPUT RS-232C AC INPUT AV INPUT
Summary of the content on the page No. 16
Cable TV Setup - After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV programming. This monitor cannot display TV programming without a TV tuner device or cable TV converter box connected to the monitor. Speakers shown for illustration only. (+) R ( ) ( ) L (+) RL AUDIO (MONO) VIDEO Y PBR P RL AUDIO RGB-PC INPUT AV INPUT S-VIDEO COMPONENT (VGA/SVGA/XGA/SXGA) AUDIO INPUT EXTERNAL SPEAKER (8Ω ) AC INPUT (480i/480p/720p/1080i) (480p/720p
Summary of the content on the page No. 17
Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others External AV Source Setup - As shown below, when connecting the Monitor to an external source, match the colors of AV input jacks on the Monitor with the output jacks on the audio/video equipment: Video = yel- low, Audio (Left) = white, Audio (Right) = red. (+) R ( ) ( ) L (+) RL AUDIO (MONO) VIDEO Y PBR P RL AUDIO RGB-PC INPUT AV INPUT S-VIDEO COMPONENT (VGA/SVGA/XGA/SXGA) AUDIO
Summary of the content on the page No. 18
DVD Setup How to connect a DVD (digital video disk player) • Connect DVD video inputs to Y, PB, PR of COMPONENT (480i/480p/720p/1080i) (DVD/DTV INPUT) and audio inputs to Audio jacks of AV INPUT. (+) R ( ) ( ) L (+) RL AUDIO (MONO) VIDEO Y PBR P RL AUDIO RGB-PC INPUT AV INPUT S-VIDEO COMPONENT (VGA/SVGA/XGA/SXGA) RGB-DTV INPUT AUDIO INPUT RS-232C EXTERNAL SPEAKER (8Ω ) AC INPUT (480i/480p/720p/1080i) (DVD/DTV INPUT) (480p/720p/1080i) (+)RL ( ) ( ) (+) YPB PR RL AUDIO (MONO)VIDEO R AUDIO L RG
Summary of the content on the page No. 19
Safety instructions Monitor Overview Connections Basic operation Sleep timer Picture & Sound Special features Others DTV Setup - To watch digitally broadcast programs, purchase/connect a digital SET-TOP BOX. - You can select only the 16:9 picture format in DTV 720p/1080i mode. How to connect a user-supplied Digital Set-top Box • You can use either the Monitor’s COMPONENT (Y, Pb, Pr) inputs or the single RGB-DTV INPUT for video connections, depending on your Set Top Box connectors. Then, make the
Summary of the content on the page No. 20
PC Setup - You can easily connect the Plasma Display to your PC for outstanding image and sound. - Use the Monitor to display images and sound from a PC Computer source. Setup Instructions to Connect a PC to your Monitor • If the image output of the PC is set higher than Default monitor. UXGA, no picture will appear on the Monitor. • The Monitor can not be used for Plug and Play (UXGA is not supported.) functionality. • Connect the signal cable from the monitor Output • If your PC computer is eq
