Summary of the content on the page No. 1
ENGLISH
WIDE LCD PANEL TV
Contents
INSTRUCTIONS
PREPARATION
Safety precautions ............................... 2
Remote control buttons and functions ... 3
Set up and connections ....................... 4
Initial settings ....................................... 6
Registering / Editing channels ............. 6
FUNCTIONS
Picture setting ...................................... 7
Sound setting ...................................... 9
Useful functions ................................. 10
Viewing Tele
Summary of the content on the page No. 2
JVC Thank you for buying this JVC LCD panel television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. • Do not allow the TV to fall! • Follow this manual • Never place anything on the TV! - Do not rest your elbows on, or allow regarding setup! - Placing liquid, naked fl ames, cloths, paper, etc. on the TV children to hang from the TV. - Connect only to a 110-240 V, may cause a fi re. 50/60Hz AC outlet. - There is a risk that the
Summary of the content on the page No. 3
Remote control buttons and functions “AAA/R03” • Insert the batteries Turn the TV on from standby Batteries Use two “AAA/R03” dry cell Colour button batteries. Insert the batteries from Turn on “Clear SD” the · end, making sure the · and ª polarities are correct. Change the aspect ratio (P. 8) V-Scroll 1. Select WARNING: If this symbol 16:9 Zoom Batteries shall not be exposed is shown, it is OK to excessive heat such as only valid in the Move the picture with direct sunshi
Summary of the content on the page No. 4
Set up and connections LT-32EX19 Connect an aerial and VCR / DVD Player AERIAL LT-32EX19 Switch between TV / VIDEO TV/VIDEO devices MENU/OK R L V V VIDEO-2 IDEO-2 Display on-screen menu / set CHANNEL Change channel / Page / Hyper Scan Function (P. 3) Power lamp Volume / Adjust VOLUME ON : Lit (Blue) OFF : Unlit Power On / Off Power lamp lights while the TV is on. To Headphone (P. 5) • “Power Lamp” (P. 11) Remote control sensor OR Care when setting VCR (DVD Player) ■ Power requi
Summary of the content on the page No. 5
Set up and connections (continued) You can connect many different devices to the rear panel of the TV. VIDEO-1 Watching videos Please read the user manuals of each device before setup. Output Input (Connecting cables are not supplied with this TV.) TM HDMI Connector. • Composite signal / Component signal LT-32EX19 (P. 16) • Sound L / R • Use Component signal Headphones HDMI-1 HDMI-2 HDMI-3 “Video - 1 Setting” (P. 12) DIGITAL VIDEO/AUDIO VIDEO-2 Watching videos To “HDMI-1” To “HDMI-3” Outpu
Summary of the content on the page No. 6
Initial Settings Registering / Editing channels You can edit the channel list or register new channel manually. Turn on the TV > Edit 1 Select a channel • Show only when powering on PR ID CH/CC 01 CH 02 02 CH 03 OK for the fi rst time. 03 CH 07 OK 04 CH 76 05 CH 12 • The power on the unit can 06 CH 09 07 CH 05 08 CH 02 also be used. 09 CH 15 10 CH 28 JVC logo appears Move Move a channel position Select a language 2 > 1. Start Edit > Language PR ID CH/CC 1. Select 01 CH 02 Engl
Summary of the content on the page No. 7
Picture setting 1. Display “Picture” menu 2. Select item and setting or adjust • To enter an items menu 1. Select 1. Select 1. Select Picture 2. Adjust MENU O OK K OK OK 2. Enter 3. Finish 2. Enter You can select a preset picture setting according to your favour. Bright : Hightens contrast and sharpness. Game Mode : Adjust sharpness of the picture when play the game. Picture Mode Soft : Softens contrast and sharpness. Standard : Standardize picture adjustment. You can change th
Summary of the content on the page No. 8
Picture setting (continued) Finer Picture adjustment : For clearly picture (Off / Mode-1 / Mode-2) Clear SD When Clear SD set to Mode-1 or Mode-2, then Digital VNR, DigiPure, Picture Management and MPEG Noise Reduction cannot operate. Features Digital VNR : Reduce the amount of noise in original picture. (Off / On) DigiPure : For natural - looking outlines (Off / On) : For smooth cinema fi lm (Auto / Off / On) Pull Down : For natural - looking pictures
Summary of the content on the page No. 9
Sound setting 1. Display “Sound” menu. 2. Select item and setting or adjust. 1. Select Sound 1. Select MENU ■ III Mono 2. Adjust Stereo/I II Sound Sound Meister Off OK OK Treble Bass Surround Balance 3. Finish 2. Enter Voice Enhancer Off Al Volume Off ■ Stereo/I II Select the broadcast sound stereo, mono or bilingual language (u: Mono / m : Stereo / I : SUB1 / II : SUB2 / Mono) Sound Meister Ambience (Off / Dynamic / Pure / Living) Treble Compensates high frequencies to widen the freque
Summary of the content on the page No. 10
> > > Useful functions 1. Display “Features” menu. • To enter an items menu 2. Select item and setting or adjust. Features MENU 1. Select 1. Select 1. Select On Timer > > Sleep Timer 2. Adjust Channel Guard OK Blue Back Off OK OK Features Child Lock Off Auto Shutoff Off Favourite Setting > 3. Finish 2. Enter 2. Enter Power Lamp Off Eco Mode Off On Timer 1. Select PR channel that you want to watch. 2. Set the On time to your desired period at time. > 1. Select PR 1. Select “On On Timer Features
Summary of the content on the page No. 11
Useful functions (continued) Blue Back Display a blue screen and mute the sound when the signal is weak or absent. (On / Off) Child Lock Disables the side control buttons of the TV. (On / Off) Auto Shutoff Set the power to turn off if no signal is received and no operation is performed for about 15 minute. (On / Off) Delete the favourite channel that you registered. (Blue) > > Favourite Setting Favourite Setting 1. Select 1 1 PR 01 PR 01 Favourite Setting 2 2 PR 03 OK 3 3 PR 0
Summary of the content on the page No. 12
V iewing Teletext W atching Video or DVDs Select the input Source. You can watch the Teletext broadcast channel with Text Functions. Note: TV/VIDEO 1. Select TV/VIDEO button select the TV mode <--> TEXT mode 1. OK video source by move down or use button 0-6 for 2. Set 2. Select a Teletext page by press number button (0-9) selection. CHANNEL • Operate the connected device and play video. • Move up or down a page by 1. Select “Set Up” MENU
Summary of the content on the page No. 13
Troubleshooting If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair. Severe noise or snow Page Poor picture quality Page Unnatural colour >> Adjust “Colour” and “Backlight” P. 7 Check the aerial cable and TV connections . P. 4 Check “Colour System”. If “Auto” is selected P. 8 Check the direction of the aerial. P. 4 select the specifi c colour system manually. Check the aerial or its cable damaged or not. -- Noise >> Set to the fol
Summary of the content on the page No. 14
Technical information Language group for Teletext PC Signals that can be displayed Group Languages • If the signal doesn’t appear, check that the vertical frequency on the PC is set to “60Hz”. Group-1 Turkish, Hungarian, English, German, French, Italian, Spanish, Portuguese, Greek, Swedish, Finnish Resolution 640 x 480(VGA) / 1024 x 768(XGA) Group-2 Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian, Hungarian, German, French, Italian, Swedish, Finnish Vertical frequency (Hz) 60
Summary of the content on the page No. 15
CH / CC List To use the Insert function (P. 6), fi nd the “CH/CC” number corresponding to the TV’s channel number from this table. US: The US channel numbers are the channel numbers used in the United States, Philippines, etc. CCIR: The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc. OIRT: The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, Vietnam, etc. AUSTRALIA: The AUSTRALIA channel numbers are the channel numbers used i
Summary of the content on the page No. 16
Specifi cation Main unit Terminals / Connectors Model LT-32EX19 LT-32BX19 Terminal name Terminal type Signal type (IN) Signal type (OUT) Broadcasting systems B / G / I / D / K / M Composite video, Analogue component 576i (625i) / 480i Colour systems PAL, SECAM, NTSC 3.58 / NTSC 4.43 MHz (525i), Channels and frequencies VHF low channel (VL) = 46.25 to 140.25 MHz Progressive : 576p (625p) / VIDEO-1 RCA connectors x 6 VHF high channel (VL) = 147.25 to 423.25 MHz 480p (525p), UHF channel (U) = 431
