Summary of the content on the page No. 1
Contents
Safety precautions 2
COLOUR TELEVISION
Preparation 3
......
1 Confirm which remote control you have 3
INSTRUCTIONS
...................................
2 Inserting the batteries 3
...
3 Connecting the aerial and external devices 4
Thank you for buying this JVC
4 Connecting the power cord ........................ 6
colour television.
..............................................
5 SETUP TOUR 6
To make sure you understand how to
Basic operation 7
use your new TV, please read this
Remote c
Summary of the content on the page No. 2
Safety precautions WARNING •To prevent fire or shock hazard, do not expose the TV to rain or moisture. CAUTION •Operate only from the power source indicated on the rear of the TV. •Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by the mains plug. Do not pull on the power cord. •Never block or cover the cabinet openings for ventilation. Never install the TV where good 15 cm ventilation is unattainable. When installing this TV, leave spaces for ventilation around
Summary of the content on the page No. 3
Preparation 1 Confirm which remote control you have RM-C360GY POWER SYSTEM PICTURE COLOUR SOUND MODE TV/VIDEO 12 3 45 6 OFF TIMER 78 9 CHANNEL RETURN+ - -- SCAN 0 / DISPLAY MUTING MENU CHANNEL VOLUME REMOTE CONRTOL UNIT RM-C360GY 2 Inserting the batteries Correctly insert two batteries, observing the , and . polarities and inserting the . end first. CAUTION: Follow the cautions printed on the batteries. Notes: • Use AA/R6/UM-3 dry cell batteries. • If the remote control does not work properly,
Summary of the content on the page No. 4
Preparation 3 Connecting the aerial and external devices •For further details, refer to the manuals provided with the devices you are connecting. • Connecting cables are not supplied. • The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either jack is output through both. You cannot provide input to both the front and rear jacks at the same time. Disconnect one input, or use one of the jacks as an output jack only (for monitoring or recording). ■ Connecting the ae
Summary of the content on the page No. 5
Preparation ■ Connecting other external devices To audio To video output output VIDEO AUDIO VCR (for playing) IN OUT VCR (for recording) To audio To video input input • Illustration of AV-2106TE. To video Camcorder output or To audio TV game output MENU VIDEO IN AUDIO Headphones • Illustration of AV-2106TE. • Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off. 5 GGT0112-001A-H_E_P02-05 5 21`01`06, 18:38
Summary of the content on the page No. 6
Preparation 4 Connecting the power cord Connect the power cord to the AC outlet. Operate only from the power source indicated on the rear of the TV. 5 SETUP TOUR When the TV is first turned on it enters the SETUP TOUR mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR. •In case of resetting that the reason for such as removal, you can set the SETUP TOUR function on the “MENU 3” menu. For details, see page 14. 1 Press the Main power but
Summary of the content on the page No. 7
Basic operation 1 Press the POWER button to turn your TV on. POWER • If your TV does not turn on, press the Main power button on the TV then press SYSTEM PICTURE COLOUR SOUND MODE the POWER button again. •You can also turn on your TV by pressing 12 3 TV/VIDEO any of the following buttons; 45 6 - the CHANNEL m button - the Number buttons OFF 78 9 TIMER - the TV/VIDEO button CHANNEL RETURN+ 0 -/-- SCAN 2 Select a channel. DISPLAY MUTING ■ Press the CHANNEL m button. • Up/down selection cannot be
Summary of the content on the page No. 8
Remote control buttons and functions In VIDEO mode: PICTURE MODE button You can select one of three picture AUTO PAL SECAM adjustment settings as you like. NTSC4.43 NTSC3.58 Press this button to select a mode. AUTO: Automatic colour system selection. BRIGHT: Heightens contrast and sharpness. •For the colour systems in each country or region, see the table“Broadcasting systems” STANDARD: on page 20. Standardizes picture adjustments. • If the picture is not normal in the AUTO SOFT: mode, change
Summary of the content on the page No. 9
Remote control buttons and functions DISPLAY button CHANNEL SCAN button You can continuously display the current You can quickly view all TV channels channel number or VIDEO mode on the programmes that you can view on your screen. TV, and search for the programme you want to view. Press this button. To turn the display off, press this button 1 Press this button to start scanning again. TV channels. The TV channel programmes are each • When selecting a channel or VIDEO mode displayed for several
Summary of the content on the page No. 10
Summary of the content on the page No. 11
Using the TV’s menus When the time set for the ON TIMER ON TIMER function is reached: Your TV will automatically turn on and The TV automatically turns on and the tune into the channel you set after the channel set for the ON TIMER function is period of time you set. displayed. 1 Press MENU T to display the •For safety reasons the TV will automatically “MENU 1” menu, then select turn off if no operations are made within “ON TIMER”. approximately two hours after the TV is turned on with the ON TI
Summary of the content on the page No. 12
Using the TV’s menus VNR (Video Noise Reduction) CHILD LOCK You can reduce the picture noise. You can disable the front control buttons of the TV. 1 Press MENU T to display the When this function is set to “ON”, the TV “MENU 1” menu, then select “VNR”. can be operated using only the remote control. MENU 1 INPUT TV Use this function to prevent children from ON TIMER PR 1 0:00 operating the TV without parental consent. VNR ON 1
Summary of the content on the page No. 13
Using the TV’s menus BLUE BACK You can mute the sound and change the picture into a blue screen while no signals are received by the TV, or when the signals are unstable. 1 Press MENU T to display the “MENU 2” menu, then select “BLUE BACK”. MENU 2 AUTO SHUTOFF ON CHILD LOCK ON BLUE BACK ON SELECT BY EXIT BY OPERATE BY -+ DISPLAY 2 Press MENU M to select “ON”. To cancel the BLUE BACK function, select “OFF”. •To view a broadcast ev
Summary of the content on the page No. 14
Using the TV’s menus SETUP TOUR AUTO CH PRESET You can start the SETUP TOUR function. You can automatically preset all TV channels that can be received by your TV 1 Press MENU T to display the to channels. “MENU 3” menu, then select “SETUP TOUR”. 1 Press MENU T to display the “MENU 3” menu, then select “AUTO MENU 3 AUTO CH PRESET CH PRESET”. MANUAL CH PRESET SETUP TOUR MENU 3 LANGUAGE ENGLISH AUTO CH PRESET MANUAL CH PRESET
Summary of the content on the page No. 15
Using the TV’s menus If the picture is not clear: MANUAL CH PRESET Fine-tune the TV channel. You can manually preset desired TV channels to desired channels. 1 Press MENU t to select “FINE”. MANUAL 1 Press MENU T to display the FINE “MENU 3” menu, then select SKIP NO SOUND SYSTEM B/G “MANUAL CH PRESET”. EXIT SELECT BY PR 3 VL MENU 3 PROGRAM BY -+ EXIT BY AUTO CH PRESET FINE BY VOL-+ DISPLAY MANUAL CH PRESET SETUP TOUR
Summary of the content on the page No. 16
Using the TV’s menus SKIP Picture Adjustments You can set undesired channels to be You can adjust the picture as you like. skipped. Channels set to be skipped 1 Press MENU T to display the cannot be selected by the CHANNEL m “MENU 4” menu. buttons nor the CHANNEL SCAN button. MENU 4 • Channels to which TV channels have not TINT been preset are automatically set to be COLOUR skipped. BRIGHT CONT. SHARP 1 Press MENU T to display the SELECT BY EXIT BY “MENU 3” menu, then selec
Summary of the content on the page No. 17
Using the buttons on the TV The following illustrations are of only some models are shown for explanation purpose only. Your TV may not be exactly the same as illustrated. 1 MENU button • MENU button 2 CHANNEL –/+ buttons ON TIMER POWER • MENU m buttons MENU CHANNEL VOLUME EXIT 3 VOLUME –/+ buttons • EXIT from MENU buttons 1 2 3 9 5 6 8 4 Remote control sensor 5 ON TIMER lamp The light is switched on while MENU CHANNEL VOLUME ON TIMER function is POWER / operating. ON TI
Summary of the content on the page No. 18
Using the buttons on the TV Basic operation Operating menus • Check to make sure the CHILD LOCK You can operate functions in menus using function is set to “OFF”. When the CHILD the front control buttons on the TV. LOCK function is set to “ON”, the TV cannot be operated using the front control buttons. 1 Press MENU y to display a menu. For details, see “CHILD LOCK” on page 12. 2 Press MENU y repeatedly to display 1 Press CHANNEL M to turn the TV the menu you want to use. on from standby mode. 3
Summary of the content on the page No. 19
Troubleshooting If there is no picture or the TV does not operate normally, make sure the problem isn’t due to the reasons indicated below. If the problem persists even after taking the measures indicated, please contact a service technician. Cannot turn the TV on Poor picture •Press the Main power button on the TV. •Press the COLOUR SYSTEM button to select another colour system. (see page 8.) • Connect the power cord to the AC outlet. •Adjust the picture settings. (see page 16.) • Set the Pictu
Summary of the content on the page No. 20
Specifications TV RF systems B, G, I, D, K, K1 Colour systems PAL, SECAM, NTSC 3.58/4.43 MHz (in VIDEO mode only) Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. External input / output INPUT: VIDEO input (RCA), AUDIO input (RCA) OUTPUT: VIDEO output (RCA), AUDIO output (RCA) Headphone jack: stereo mini jack (3.5 mm diameter) Accessories • Remote control unit: RM-C360GY • AA / R6 / UM-3 dry cell batte
