Grundig PHDQ 2002 BC user manual

User manual for the device Grundig PHDQ 2002 BC

Device: Grundig PHDQ 2002 BC
Category: Flat Panel Television
Manufacturer: Grundig
Size: 0.55 MB
Added : 7/11/2014
Number of pages: 24
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Grundig PHDQ 2002 BC. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Grundig PHDQ 2002 BC.

For your convenience

If looking through the Grundig PHDQ 2002 BC user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Grundig PHDQ 2002 BC on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Grundig PHDQ 2002 BC to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Grundig PHDQ 2002 BC User manual - Online PDF
Advertisement
« Page 1 of 24 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Grundig PHDQ 2002 BC but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Grundig PHDQ 2002 BC. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Grundig SAT Syst ms
HDTV Digital QAM
PHDQ 2002 BC
PHDQ 3002 BC
PHDQ 4002 BC
PHDQ 5002 BC
AAAA
C CLASS CLASS CLLA AS SS S
GSS Phone: +49 (0) 911 / 703 8877
Grundig SAT Systems GmbH Fax: +49 (0) 911 / 703 9210
Beuthener Straße 43 Email: info@gss.tv
D-90471 Nuremberg Internet: http://www.gss.tv

Assembly Instructions Assembly Instructions
English
KLASSE K KLASSE KLLA AS SS SE E

Summary of the content on the page No. 2

Contents 1 Safety regulations ...............................................................................................3 2 General information ............................................................................................3 2.1 Packing contents ....................................................................................3 2.2 Technical data ....................................................................................... 4 2.3 Description .........................

Summary of the content on the page No. 3

1 Safety regulations Important � Assembly, installation and servicing must be carried out by an authorised electrician. � Switch off operating voltage before the start of assembly or service work or pull out the mains plug. � Install the system … - in a dust-free, dry environment - so that it is protected from moisture, vapours, splashing water and damp - somewhere protected from direct sunlight - away from the immediate vicinity of heat sources - at an ambient temperature of < 50 °C. �

Summary of the content on the page No. 4

2.2 Technical data The devices meet the following EU directives: 73/23/EEC, 89/336/EEC The product fulfils the guidelines and standards for CE labelling. HF input: Frequency range: 950 … 2150 MHz Frequency raster: 1 MHz Level range: 35 dBµV … 80 dBµV 1 2 3 5 7 DVB-S modes: DVB-S / , / , / , / , / 2 3 4 6 8 1 3 2 3 4 5 8 9 DVB-S2 modes: QPSK / , / , / , / , / , / , / , / , 2 5 3 4 5 6 9 10 3 2 3 5 8 9 8PSK / , / , / , / , / , / 5 3 4 6 9 10 Symbol rate DVB-S: QPSK: 2 …

Summary of the content on the page No. 5

Connections: SAT inputs: 2 F-connectors HF output: 1 IEC socket, female Connection strip (10-pin): For supply voltages and control circuits Socket RS 232: Update interface 2.3 Description The Cassettes convert two QPSK-modulated data flows into one QAM-modu- lated data flow. The Cassettes are controlled via the head end. Each Cassette has two inputs and one HF output, as well as an integrated multi-transport flow processor for stuffing, PID pass, drop and service filtering. For thes

Summary of the content on the page No. 6

2.3.1 Manual display of the software version If necessary, you can call up the display of the software version of the control unit manually: � Hold down any two keys of the control unit simultaneously until the display goes dark and the software version, e.g. “V.34”, is displayed. 2.3.2 How the TP module works When converting the QPSK-modulated signal to a QAM-modulated cable signal, the demodulated data stream can be accessed via the integrated TP module. This data stream, also called tran

Summary of the content on the page No. 7

2.3.3 Explanation of the term “symbol rate” High-quality modulation methods like QPSK and QAM can encrypt several bits as a single transferred and received symbol. The user data stream contains the audio and video signals of a station and is thus permanently assigned. If the value of the modulation and therefore the number of bits per symbol is in- creased, the symbol rate falls compared to the user bit rate. Formulae for calculating the output symbol rate “SR (A)” at a fixed input symbol r

Summary of the content on the page No. 8

3 Assembly 3.1 Installing the Cassette Warning Before inserting or changing Cassettes, pull the mains plug of the head end out of the mains socket. � Unscrew the fastening screws from the bracket in the head end. � Insert the Cassette into a free slot and push it into the housing. � Align the Cassette and gently make it contact with the connections of the circuit board and the HF bus bar. � Fasten the Cassette with the 1 screws. C101 L104 L100 L101 L103 C100 LNC- BREITBA +18V +24 ROT

Summary of the content on the page No. 9

Note: The operating software of the Cassette can be updated via the socket “RS 232” 3 (9-Pin-Sub-D) by means of a PC or notebook. Use the “BE-Flash” software as the update software. You can make drop and pass filter settings in the channel strip “B” using the “MTP” PC software. You can find the current operating software of the Cassettes on the website “http://www.gss.tv”. 4 The operator control panel at a glance 4.1 Menu items Program the Cassette using the keys on the head end contro

Summary of the content on the page No. 10

5 Programming The following examples show how the PHDQ 4002 BC Cassette is programmed; the output channels can be set from S21 … S41. Set the other Cassettes listed in the same way. 5.1 Preparation Notes: Using the menu “LEVEL CONTROL” the Cassette generates an equally powerful HF carrier on the video carrier frequency of the channel. In this way, the Cas- sette‘s level can also be set with an analogue TV test receiver set to the video carrier frequency of the channel. In order to prevent i

Summary of the content on the page No. 11

5.2 The menus at a glance Mit * ) gekennzeichnete Funktionen sind BE–Remote V.34 nur im Kanalzug ”A“ möglich Ein/On Functions marked by a star * ) are only PROFESSIONAL possible in the channel strip ”A“ t > 10 s Bx 1A TWIN-SAT Böx 4 TWIN-SAT Box 1 DVB-MTP Box 2 TWIN-QAM C5-12,S3-24 C07 + C5-12,S3-24 C07 S21-S41 *** S21 S21-S41 *** S23 Bx 1A DVB-MTP Bx 1A VERSION: Kanalzug S21-S41 *** S21 PHDQ 4002 V3 Channel strip A / B Bx 1A VERSION: TP-Modul: MTP15 t > 2 s * ) * ) Bx 1A OUTPUT: Bx 1A O

Summary of the content on the page No. 12

Bx 1A LNB-Freq.: ◀ ▶ / f = 10600 MHz Bx 1A INPUT: ◀ / ▶ – 27500 DVB-S + / C/N Bx 1A INPUT: Bx 1A ◀ ▶ / + – f=11836 -0.4 14.6 dB (+ 9.6)OK / * ) Kanalzug B M Channel strip B * ) Bx 1A QAM-MODE: + – 256-QAM / * ) Bx 1A STUFFING: ◀ / ▶ – SR=6900 (6531) + / Kanalzug A M Channel strip A 5.2.1 The menu of channel strip B + + Bx Bx 1 1A A D DVB-MTP VB-MTP Kanalzug Kanalzug S S21-S41 21-S41 *** *** S21 S21 C Channel strip hannel strip A A / / B B Bx 1B LNB-Freq.: ◀ ▶ / f = 10600 MHz Bx 1B INPUT

Summary of the content on the page No. 13

5.3 Cassette programming � Switch on the head end. —> The display shows the software version of the head end (e.g. V.34). —> The processor reads the Cassettes‘ data (approx. 10 s). Mit * ) gekennzeichnete Funktionen sind BE–Remote V.34 nur im Kanalzug ”A“ möglich Ein/On Functions marked by a star * ) are only PROFESSIONAL possible in the channel strip ”A“ t > 10 s Bx 1A TWIN-SAT Böx 4 TWIN-SAT Box 1 DVB-MTP Box 2 TWIN-QAM C5-12,S3-24 C07 + C5-12,S3-24 C07 S21-S41 *** S21 S21-S41 *** S

Summary of the content on the page No. 14

To query software versions: - Software version and type of the Cassette: Press the button once. - Software version of the TP module: Press the button twice. - Return to main menu: Press the button again. � Press the button. —> The “OUTPUT” menu is activated. Setting the output channel (only Bx…A) t > 2 s * ) * ) Bx 1A OUTPUT: Bx 1A OUTPUT: ▶ S21 (306.00) S21 0 (306.00) -64 … +64 � By pressing , set the desired output channel. —> The channel range that can be set depends on

Summary of the content on the page No. 15

OUTPUT: Bx 1A OUTPUT: Bx 1A ◀ ▶ / – 112.0000 MHz Modulator: on + / The QAM signal is transmitted with a bandwidth of 8 MHz. This means that you can only use the channel centre fre- quency of the existing channel raster in the range of chan- nels S21 … C69 (frequency raster 8 MHz). The frequency raster is 7 MHz in the range of the lower channel ranges ( ≤ channel S20). If one uses the existing channel raster here, this will result in interference (overlapping) of the 8 MHz QAM signal p

Summary of the content on the page No. 16

Press the button. —> The menu “Setting the LNB oscillator frequency” – “LNB-Freq.:” is activated (page 18). or � Press the button. —> The sub menu “Modulator settings” – “OUTPUT: Modulator” is activated. Modulator settings (only Bx…A) * ) Bx 1A OUTPUT: on Modulator: on / off � By pressing the buttons, switch the modulator (HF output) “on” (default setting). � Press the button. —> The display shows “OUTPUT: LEVEL HF OUT:”. Setting output level of the channel strips (only

Summary of the content on the page No. 17

strip. Thus you can measure the absolute output level using a analogue test receiver. � Measure the output level of the channel strip using the con- nected antenna test receiver. � By pressing the AUDIO button activate the menu “OUTPUT: LEVEL HF OUT:” and adjust the output level in- crementally from “0” to “–7” dB by pressing . � Press the button twice. —> “OUTPUT: RANDOM” is shown in the display. Producing a QAM signal for testing (only Bx…A) * ) Bx 1A OUTPUT: kBd RANDOM 6900 The Casset

Summary of the content on the page No. 18

� By pressing set the spectral position “normal” or “inverse”. � Press the button. —> The menu “QAM monitoring” – “MODE: Ueberwachung” is activated. QAM monitoring (only Bx…A) In this menu the signal at the Cassettes´ output is defined if there is no input signal available: – “Ueberwachung” (Monitoring): Single carrier, – “KDG”: QAM modulated data flow. Thus an automatic monitoring of the QAM modulated out- put signal is possible. * ) MODE: Bx 1A Ueberwachung Überwachung / Monito

Summary of the content on the page No. 19

Setting the input symbol rate and the DVB mode Setting the symbol rate The symbol rate “SR” of the satellite transponder can be found in the current transponder tables of the various satel- lite trade magazines or in the websites of the according program providers. Bx 1A INPUT: ◀ ▶ / 27500 DVB-S – + / � Use the ◀ / ▶ buttons to place the cursor under the number “SR=27500” to be changed and set the symbol rate with the buttons . Setting the DVB mode The Cassettes recognize the transmitted

Summary of the content on the page No. 20

Setting the input frequency (transponder frequency) Notes: – If three dots “ … ” appear in the second line of the display, the Cassette is in the “station search” mode. Please wait until the process has finished. Once the HF receiver has synchronised to the input signal, any offset to the target frequency is displayed in MHz, e.g. “– 0.4”. – If a question mark “?” appears in the second line of the display, there is no input signal present. Check the configu- ration of the antenna system


Alternative user manuals
# User manual Category Download
1 Grundig 18-5701 IDTV User manual Flat Panel Television 44
2 Grundig 26-6832 T ECO User manual Flat Panel Television 48
3 Grundig 22-6831 T User manual Flat Panel Television 99
4 Grundig 26-6831 T User manual Flat Panel Television 25
5 Grundig 32-6831 T User manual Flat Panel Television 111
6 Grundig 19-2830 T User manual Flat Panel Television 60
7 Grundig 22-2830 T User manual Flat Panel Television 143
8 Grundig 32-6832 T ECO User manual Flat Panel Television 14
9 Grundig 32-6840 T User manual Flat Panel Television 13
10 Grundig 37-4831 T User manual Flat Panel Television 6
11 Grundig 32PF5531D User manual Flat Panel Television 6
12 Grundig 32-7851 T User manual Flat Panel Television 60
13 Grundig 32-4831 T User manual Flat Panel Television 112
14 Grundig 37-6831 T User manual Flat Panel Television 11
15 Grundig 42-4831 T User manual Flat Panel Television 7
16 Sony 32LX1E User manual Flat Panel Television 81
17 Sony 4-180-179-16(1) User manual Flat Panel Television 13
18 Sony 4-106-868-11(1) User manual Flat Panel Television 7
19 Sony 32EX52X User manual Flat Panel Television 39
20 Sony 32EX42X User manual Flat Panel Television 24