Summary of the content on the page No. 1
USER’S GUIDE
V: 698-01
TE4782B
47” LED HDTV
For the most up-to-date version of this User’s Guide, go to www.gpx.com
Summary of the content on the page No. 2
Warnings and Precautions CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE WARNING: Shock hazard - Do Not Open. BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR WARNING: To reduce the risk of fire or electric shock, do Mains Plug or Direct plug-in adapter is used as disconnect not expose this apparatus to rain or moisture. device and it should remain readily operable during AVERTISSEMENT: Pour réduire le risque d’incendie ou de intended use. In order to d
Summary of the content on the page No. 3
Important Safety Instructions 1. Read these Instructions. FCC Warnings 2. Keep these Instructions. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the 3. Heed all Warnings. user’s authority to operate the equipment. 4. Follow all instructions. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC 5. Do not use this apparatus near water. Rule
Summary of the content on the page No. 4
47” LED HDTV Features • 47” LED display controls • 3.5mm PC audio input • Display supports: 720p, 1080i, • Multi-language on-screen display • RF input 1080p • Auto-scan • Built-in stereo speakers • 1920 x 1080 native resolution • Electronic program guide • Full-function remote • 1080p Full HD • Sleep timer • Wall mountable • Aspect ratio: 16:9 • Closed captioning • Dual Voltage: 220V/50Hz, • Dynamic contrast: 45,000:1 • Digital volume control 120V/60Hz • Brightness: 450cd/m²
Summary of the content on the page No. 5
Table of Contents Warnings and Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 47” LED HDTV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 6
Introduction Channel ± Setup Power Press to adjust Volume ± Source Press to access Press to turn the television Press to adjust Press to adjust the television the television channel. the volume. the source. menu. off and on. RCA Stereo RCA Stereo Component Composite Audio Outputs Audio Inputs Video Input Video Input Optical Audio Output RF Input VGA Video Input PC Audio Input HDMI Inputs USB Port 6
Summary of the content on the page No. 7
Power Source Press to power the television off Press to view the available or on. television sources. Press the ARROW and OK buttons to adjust FAVORITES Number Keypad the current television source. Display Favorites Press to view the on-screen Press to cycle through saved display. favorite channels in TV mode. OK/Arrow Keys Guide In TV mode, press to view the on- Setup screen television guide. Press to view the television setup menu. Picture Press to adjust the picture Sound between STANDA
Summary of the content on the page No. 8
Setup Connecting a TV Antenna Connecting Basic Cable Requires a TV antenna (not included). Requires a cable connection. 1. Connect a VHF, UHF, or HDTV antenna to the RF 1. Connect a cable to the RF Input on the Input on the television. television. 2. Press the Source button to switch to TV mode. 2. Press the Source button to switch to TV mode. 3. Press the Setup button to access the setup 3. Press the Setup button to access the setup menu. menu. 4. Press the Arrow ( ) buttons to highlight th
Summary of the content on the page No. 9
Favorites and Clock Adding Favorites Setting the Clock 1. Press the Source button to switch to TV mode. 1. Press the Setup button to access the setup menu. 2. Press the Setup button to access the setup menu. 2. Press the Arrow () buttons to highlight the SETUP icon. Press the Enter button. 3. Press the Arrow ( ) buttons to highlight the CHANNEL icon. Press the Enter button. 3. Press the Arrow ( ) buttons to highlight CLOCK. Press the Enter button. 4. Press the Arrow ( ) buttons to h
Summary of the content on the page No. 10
Channels Auto Scanning for Channels The Auto Channel Scan must be run before any channels can be viewed on the television. 1. Press the Source button to switch to TV mode. 2. Press the Setup button to access the setup menu. 3. Press the Arrow ( ) buttons to highlight the CHANNEL icon. Press the Enter button. 4. Press the Arrow ( ) buttons to highlight SIGNAL TYPE. Press the Arrow ( ) buttons to select AIR. 5. Press the Arrow ( ) buttons to highlight AUTO CHANNEL SEARCH. Press the Enter b
Summary of the content on the page No. 11
TV Menu and Parental Controls Parental Controls (V-Chip) 1. Press the Source button to switch to TV mode. 2. Press the Setup button. 3. Press the Arrow ( ) buttons, highlight PARENTAL CONTROL PICTURE, and press the Enter button. 4. The default passcode for the parental lock is: 0 0 0 0 5. Enter the passcode to access the PARENTAL CONTROL preferences. 6. From this menu, you can lock specific ratings from the United States rating system or the Canadian rating system by accessing the V-CH
Summary of the content on the page No. 12
Connecting Other Devices Connecting a Set-Top Box You will need: a set-top box, composite and RCA stereo cables or component and RCA stereo cables or an HDMI cable (not included). 1. Connect the set-top box’s audio and video outputs to the corresponding audio and video inputs on the television. 2. Power the television on and press the Source button to switch to the connected input (AV (composite), YPbPr (component), or HDMI 1, 2, or 3). Connecting a Gaming Device You will need: a gaming
Summary of the content on the page No. 13
Connecting Other Devices Connecting a Computer You will need: a PC with a VGA output, and a VGA cable (not included). 1. Connect the computer’s VGA output to the VGA/PC Input on the television. 2. Power the television on and press the Source button to switch to the PC Mode. 3. Audio from the connected PC can be input to the television through the TV’s PC Audio Input by using a 3.5mm audio cable (not included). Using the Optical Audio Out You will need: a (home theater) with an Optical Aud
Summary of the content on the page No. 14
USB Connecting a USB Thumb Drive 1. Load a USB thumb drive into the USB Port as shown in the image to the right. Using a USB Thumb Drive 1. Follow the instructions for Connecting a USB thumb drive. 2. Press the Source button to switch to Media mode. 3. Use the Arrow and Enter buttons to select and play content from the connected USB thumb drive. 14
Summary of the content on the page No. 15
Mounting Mounting the Television Please consult a professional before attempting to 200mm mount the television. Due to it’s large size, it is recommended to have two or more people when attempting to move or mount this unit. 200mm COMPONENT VIDEO IN Customer Support: 1-888-999-4215 15
Summary of the content on the page No. 16
Company Information International Support Green Initiative To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.gpx.com Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a Environmental Commitment to ‘Protect for Today preguntas frecuentes, visite la sección de apoyo en: and Sustain for Tomorrow’ www.gpx.com On a continual basis DPI, Inc. is making effo
